I totally recommend the cases especially the diamond shield screen protector. The FB scanner with the screen protector works as good as if there isn't one on there . Doesn't even need extra pressure. The Torras cases fit very precise. I bought 10 cases for my s24 and almost all of them are going back except for the Torres. Most of them have the titanium frame peeking out. But peeking out unevenly. Its an eye sore. But with the Torras cases none of them have the titanium peeking out and the side are raised just enough not being intrusive is your are swiping from the end of if each side. Another worthy mention is out all of the cases I bought Torras cases have the most forgiving more round corners. They are not sharp like the other ones. A lot of engineering went into these cases and still managed to be non bulky. Great job Torras.
For S24U videos would probably request a spen functioning test with out magsafe accessory attached and without. Not to make videos longer just to know if it works with spen without spen interference
There's no need to test S-Pen functionality with and without a magsafe accessory attached. If there is a magsafe case on the phone, the S-Pen functionality will be affected! That's not an opinion, it's a fact! Anyone who says otherwise is either lying, or ignorant. It doesn't matter the case quality. Anytime there is a magnet on the back, the S-Pen functionality WILL be affected!! Doesn't matter if an accessory is attached or not, there are always magnets in the case! And it will ALWAYS be worse with an accessory attached, because then there are even more magnets interfering. That's just the way it is. It isn't based on anyone's thoughts or opinions, it's based on facts which were scientifically proven many years ago.
@@stanglifemike3759 you're incorrect. I have thinborne case and spigen ring holder. It works. Depends on whether magnet is on inside or outside and if any magnet blocking material is on the case. You have no idea what you're talking about lol plenty of RUclips videos demonstrate this as proof
@@stanglifemike3759 To prevent any impact on the S pen, we have added a layer of iron sheet to isolate the influence of magnetic force. You can refer to the customer feedback in the link. Most of the customer feedback is that it is compatible with magnetic suction accessories and does not affect them. 😊
Definitely wish they made a case with individual camera lens cut outs especially for the price point. Also coloured buttons should be an option for all of the torras range! Thanks
I have a FEW mag-safe style cases even for my S23FE, and they work absolutely great! They still allow wireless charging and some cases have stronger magnets than others when you actually buy Apple Mag-safe certified products like wallets and chargers. They are offered for just about ANY Galaxy phone. Can't say for the "A" series phones, as I've never owned one but, probably do.
@hightechcheck How would you compare this Torras screen protector to the amfilm protector that you recommended from your most recent video? They seem to be very similar but amfilm seems quite a bit cheaper on amazon. Any reason to pay more for the Torras?
@HighTechCheck since Torras has not answered 2 of my emails I will ask you. I am looking at 2 cases for the S24 Ultra and I have a few questions price being not the object 1 Between the O Stand Clear and the P Stand Magsafe which offers better protection for camera? 2 Between the O StandClear and the P Stand Magsafe stand which offers better overall protection? 3. Between the O Stand Clear and the P Stand Magsafe stand, which has a stronger magnet?
Thank you for the video. Can you provide the weight of the p stand case and the one without a stand? I appreciate you provided the weight for the O stand, as it is very hard to get that information from the web or even the manufacturer.
I'm using the Torras diamond screen protector and so far I'm very happy with it. In fact, I bought it based on your 1hr screen protector comparison video.
An understated feature of this 2.4 oz steel ball drop at 8.5 feet is that the test started at 2, 4, 6, 8, and finally concluded at 8.5 feet. The ball obviously impacted the same area of the screen potector... Wow!!! Of course, I immediately ordered and installed it on my 24 Ultra. It's too bad one isn't offered for the Samsung S23...
I do not understand why the cases for S24U are not as protective as the ones for iphones, meaning the front of the case is hardly raised (and not only that, but only raised edge of top and bottom, not all around) because the minute you put a protective glass on the screen, the glass is now above the edge of the case which seems like on your first drop? Protective glass will be shattered, that was not the case for when I had an iPhone, but with these S24U cases? They seems like not only lower quality (because of material), but also not as protective. I just ordered 3 more cases from amazon, the first two are going back, let's see which one out of the 5 cases I keep.......
Does magnet interfere with SPEN? I have heard that you might get POPUPS and unusual behaviours with SPEN when you attach your magnetic case to for example Magnetic car phone holder
My s24 ultra has the overheat problem since its purchase, I need a tin cover but the aramid one isn't good for heat dissipation, I need a carbon fiber or graphere cover for my phone, do you know any?
I have torras magsafe case with ring stand, wireless charging using torras power bank is overheating both phone and powerbank. So be careful and test it out to avoid damaging your phone.
This depends on the magnetic strength of your magsafe accessory, and if your charger is an official charger (Samsung or Apple), the impact is not significant. To prevent any impact on the S pen, we have added a layer of iron sheet to isolate the influence of magnetic force. You can refer to the customer feedback in the link. Most of the customer feedback is that it is compatible with magnetic suction accessories and does not affect them 😊😊
I have a question. Does each case have replaceable colored side buttons? I'm especially interested in the one with a magnetic ring that can be used as a stand. I want to buy this model, and these colorful buttons are a great addition.
Damn …because of you and your reviews I am not sporting a torras case and screen protector. Thank you for excellent reviews, you sir are a true gem in the world of you tube influencers
In the Ostand model, when the kickstand is closed, does the hinge stick out slightly causing the phone (with case) to rock or move slightly when placed flat on a table?
I am looking forward to your screen protector video for s24U. Seems like the biometric fingerprint sensor doesnt work well with most screen protectors if your finger is dry.
Does anyone can check the weight of P-Stand version? No info here :) I was very dissapointed with 60 something grams of Spigen Ultra Hybrid S, so before buying this one I would appreciate this info. :)
I have pride of Dae Han Min Guk 🇰🇷 Spigen mag safe Tough Armor case also with kick stand. Because previous experience with S10. I have 1 year old hand which I dropped from 17ft 2nd floor. Result no damage screen or body. And been having it until month ago because of my work I needed 2 upgraded so got S24 Ultra. S10 I would hand of 2 my daughter. Because it's still in mint condition. As I bought S24 Ultra thru Best buy online of opened 📦 good condition. I ordered jeff bozos of Spigen case on prime for $21.99. I been using it and same results. I dropped it few times of shoulder height, no damage. I don't know about your product. But my Spigen case is guaranteed. I will guarantee it with my life that confidence.
If you use the S-pen regularly for things like writing or delineating areas for screenshots, DO NOT buy a case with magsafe. It will cause calibration problems with your S-pen, so it writes about 1/8 inch away from where it is pointed (in some areas of the screen) and occasional gaps in lines. When I replaced the magsafe case with a clear one, thr problem went away.
To prevent any impact on the S pen, we have added a layer of iron sheet to isolate the influence of magnetic force. You can refer to the customer feedback in the link. Most of the customer feedback is that it is compatible with magnetic suction accessories and does not affect them. 😄
Brother can you give meone s 24 ultra for me i dont have money to buy this.. But this phon is my dream phon.. I love your videos.. Watching with Shineing eyes...❤
I wish Torras would make full protection TPU around the camera lenses with precise cutouts.
I totally recommend the cases especially the diamond shield screen protector. The FB scanner with the screen protector works as good as if there isn't one on there . Doesn't even need extra pressure.
The Torras cases fit very precise. I bought 10 cases for my s24 and almost all of them are going back except for the Torres. Most of them have the titanium frame peeking out. But peeking out unevenly. Its an eye sore. But with the Torras cases none of them have the titanium peeking out and the side are raised just enough not being intrusive is your are swiping from the end of if each side.
Another worthy mention is out all of the cases I bought Torras cases have the most forgiving more round corners. They are not sharp like the other ones. A lot of engineering went into these cases and still managed to be non bulky. Great job Torras.
For S24U videos would probably request a spen functioning test with out magsafe accessory attached and without. Not to make videos longer just to know if it works with spen without spen interference
Im using Torras Ostand, I tried magsafe accessory attached and it worked with spen.
There's no need to test S-Pen functionality with and without a magsafe accessory attached. If there is a magsafe case on the phone, the S-Pen functionality will be affected! That's not an opinion, it's a fact! Anyone who says otherwise is either lying, or ignorant. It doesn't matter the case quality. Anytime there is a magnet on the back, the S-Pen functionality WILL be affected!! Doesn't matter if an accessory is attached or not, there are always magnets in the case! And it will ALWAYS be worse with an accessory attached, because then there are even more magnets interfering. That's just the way it is. It isn't based on anyone's thoughts or opinions, it's based on facts which were scientifically proven many years ago.
@@stanglifemike3759 you're incorrect. I have thinborne case and spigen ring holder. It works. Depends on whether magnet is on inside or outside and if any magnet blocking material is on the case. You have no idea what you're talking about lol plenty of RUclips videos demonstrate this as proof
How bout compass function?
@@stanglifemike3759 To prevent any impact on the S pen, we have added a layer of iron sheet to isolate the influence of magnetic force. You can refer to the customer feedback in the link. Most of the customer feedback is that it is compatible with magnetic suction accessories and does not affect them. 😊
Definitely wish they made a case with individual camera lens cut outs especially for the price point. Also coloured buttons should be an option for all of the torras range! Thanks
I have a FEW mag-safe style cases even for my S23FE, and they work absolutely great! They still allow wireless charging and some cases have stronger magnets than others when you actually buy Apple Mag-safe certified products like wallets and chargers. They are offered for just about ANY Galaxy phone. Can't say for the "A" series phones, as I've never owned one but, probably do.
@hightechcheck How would you compare this Torras screen protector to the amfilm protector that you recommended from your most recent video? They seem to be very similar but amfilm seems quite a bit cheaper on amazon. Any reason to pay more for the Torras?
@HighTechCheck since Torras has not answered 2 of my emails I will ask you. I am looking at 2 cases for the S24 Ultra and I have a few questions price being not the object
1 Between the O Stand Clear and the P Stand Magsafe which offers better protection for camera?
2 Between the O StandClear and the P Stand Magsafe stand which offers better overall protection?
3. Between the O Stand Clear and the P Stand Magsafe stand, which has a stronger magnet?
The anti drop and magnetic properties are the same because we use TORRAS patented anti-drop technology and magnets😄
does spen works?
I got the grey ostan case today, it looks and feels great on the titanium grey s24 ultra 😊
Thank you for the video. Can you provide the weight of the p stand case and the one without a stand? I appreciate you provided the weight for the O stand, as it is very hard to get that information from the web or even the manufacturer.
I'm using the Torras diamond screen protector and so far I'm very happy with it. In fact, I bought it based on your 1hr screen protector comparison video.
An understated feature of this 2.4 oz steel ball drop at 8.5 feet is that the test started at 2, 4, 6, 8, and finally concluded at 8.5 feet. The ball obviously impacted the same area of the screen potector... Wow!!! Of course, I immediately ordered and installed it on my 24 Ultra.
It's too bad one isn't offered for the Samsung S23...
I do not understand why the cases for S24U are not as protective as the ones for iphones, meaning the front of the case is hardly raised (and not only that, but only raised edge of top and bottom, not all around) because the minute you put a protective glass on the screen, the glass is now above the edge of the case which seems like on your first drop? Protective glass will be shattered, that was not the case for when I had an iPhone, but with these S24U cases? They seems like not only lower quality (because of material), but also not as protective.
I just ordered 3 more cases from amazon, the first two are going back, let's see which one out of the 5 cases I keep.......
Dude you've been spamming this comment on multiple s24 videos.. get a life
Does the clear case gets yellow fast? Or it does handle months without getting yellow
Does magnet interfere with SPEN? I have heard that you might get POPUPS and unusual behaviours with SPEN when you attach your magnetic case to for example Magnetic car phone holder
Does the Magsafe Ring accessory make problems with the S-pen? The ring with a rubber loop...?
Damn your videos are exciting! I think I'll run out and buy all of this stuff for my phone!
Does it works well with chargers or magnetic charger cables???
Another great video and content torras has some great cases and the screen protectors are the best I’ve tried thanks 😎👍
Thank you Mary!
Are the cases QI wireless compatible???
My s24 ultra has the overheat problem since its purchase, I need a tin cover but the aramid one isn't good for heat dissipation, I need a carbon fiber or graphere cover for my phone, do you know any?
I have torras magsafe case with ring stand, wireless charging using torras power bank is overheating both phone and powerbank. So be careful and test it out to avoid damaging your phone.
Are there any issues with using the S-pen woth the O-stand one ?
This depends on the magnetic strength of your magsafe accessory, and if your charger is an official charger (Samsung or Apple), the impact is not significant. To prevent any impact on the S pen, we have added a layer of iron sheet to isolate the influence of magnetic force. You can refer to the customer feedback in the link. Most of the customer feedback is that it is compatible with magnetic suction accessories and does not affect them 😊😊
I have a question. Does each case have replaceable colored side buttons? I'm especially interested in the one with a magnetic ring that can be used as a stand. I want to buy this model, and these colorful buttons are a great addition.
Only magnetic suction models without brackets have replacement buttons😄
Damn …because of you and your reviews I am not sporting a torras case and screen protector.
Thank you for excellent reviews, you sir are a true gem in the world of you tube influencers
Does the pstand case work with the spen?
Bought the P-Stand case and can confirm that it does not interfere with the S Pen for those wondering.
In the Ostand model, when the kickstand is closed, does the hinge stick out slightly causing the phone (with case) to rock or move slightly when placed flat on a table?
No it doesn't it's flush
I am looking forward to your screen protector video for s24U. Seems like the biometric fingerprint sensor doesnt work well with most screen protectors if your finger is dry.
Great review. Perfectly thorough.
I just bought the grey colored torras case and the texture feels different than before.
Does anyone can check the weight of P-Stand version? No info here :)
I was very dissapointed with 60 something grams of Spigen Ultra Hybrid S, so before buying this one I would appreciate this info. :)
Really nice accessories
i really wanted to like the case but its so slippery in the hand so i went with the casecoo instead
Does the screen protector bring back glare?
Yes.
Why why why need the Magnetic ring if this thing disturbed Spen using.. just better with stand and protection
I have pride of Dae Han Min Guk 🇰🇷 Spigen mag safe Tough Armor case also with kick stand. Because previous experience with S10. I have 1 year old hand which I dropped from 17ft 2nd floor. Result no damage screen or body. And been having it until month ago because of my work I needed 2 upgraded so got S24 Ultra. S10 I would hand of 2 my daughter. Because it's still in mint condition. As I bought S24 Ultra thru Best buy online of opened 📦 good condition. I ordered jeff bozos of Spigen case on prime for $21.99. I been using it and same results. I dropped it few times of shoulder height, no damage.
I don't know about your product. But my Spigen case is guaranteed. I will guarantee it with my life that confidence.
Where can we get that flash logo wallpaper for s24 ultra
I dont understand why you dont have 1mil subs.
If you use the S-pen regularly for things like writing or delineating areas for screenshots, DO NOT buy a case with magsafe. It will cause calibration problems with your S-pen, so it writes about 1/8 inch away from where it is pointed (in some areas of the screen) and occasional gaps in lines. When I replaced the magsafe case with a clear one, thr problem went away.
That is largely dependent on case. I've had no issues with my Torras, Benks, or UAG cases. I only have an issue if I have a magsafe accessory on it
To prevent any impact on the S pen, we have added a layer of iron sheet to isolate the influence of magnetic force. You can refer to the customer feedback in the link. Most of the customer feedback is that it is compatible with magnetic suction accessories and does not affect them. 😄
still waiting torras in europe switching from spigen
Don't buy cases with the mag safe on ebay one screwed up my s 24 ultra lucky I was given another new in box!! That looks different from mag safe
What happened to your phone???
@aguywholovekittens8438 s pen and battery got wasted but Samsung still replaced my device since I was in my 15 day return period
@larry-of9kh ooh nice bro, you're lucky 😅
how did the mag safe manage to ruin your battery and s-pen??
@swifty1969 samsung isn't designed for the mag safe Google it, it messes with s pen functions
Brother can you give meone s 24 ultra for me i dont have money to buy this.. But this phon is my dream phon.. I love your videos.. Watching with Shineing eyes...❤
lol no
@hightechcheck hey bro can you give me s24 ultra me as your big fan .i am from bangladesh.
🤡🤡🤡🤡