Good looking G. Wrap looks great for "noobs." You guys are having waay too much fun. I did my G37 the same on the dash & doors. I did the console and center cluster in 3M matte black, but I covered the chrome around the shifter in the carbon. I used the 5D so it has the deep high gloss look. If you drop the whole glove box you'll be able to get that piece to sit right. I had the same problem. You could change your cabin air filter while your in there. One tool I recommend for that job is an 8-10 inch #2 Phillips screwdriver. For the windows, roll each one all the way down, then back up. Hold the switch in the up position for an extra 15 seconds after the glass reaches the top. Viola! Windows reset.
Dropped the glove box to change my cabin filter... won't go back in right. Can't get all the screws to line back up. Idk...the cops did break the glove box though. Broke the right side support. Still closes but takes finesse.
So glad i found this channel. I'm actually saving up for a down payment on a g37x coupe. Sadly it will be automatic bc it'll be my daily. And a few other reasons. My 350z will be manual tho. Hopefully I learn from this channel
My windows had the same problem before when i reseted my cars ecu, all you gotta do is hold up both driver and passenger window down for 10 sec, than up 10 sec than again twice and that should be it !
Next all you need is to take off them nasty buttons and buy them $21 black or aluminum machine buttons they make it look so much better it's unreal that buttons can make a car that much better
could i just heat the wrap and put it on and seal it using a credit card. i want to do this but i dont think i can do all that stuff you did. do you think itll work
Ahmed Tarabain You’d have to take out the interior so the wrap looks flush because a credit card won’t be able to seal some angles. Also, it might rip easily if not sealed behind the panels.
Ik your car battery died a few days after this video... always disconnect you battery when you have your doors open for a long time or doing electrical work
CaliWorks the title of your video says otherwise.. and I was looking for ideas what to do with my g37. Mine has the updated interior style though haven’t modded it much yet aside from LEDs and has dark tinted windows
its not metal its plastic, and after time it chips. Sooner or later it has to be re-covered. I like it a lot. Jus nervous if its too much black for me and my G.
Katacus I'm 21 I was about to get married last month But I left my girl and moved back to my parents and bought my dream car the g35 and I rather be here than married haha.
+CaliWorks I was thinking of doing the same thing to my 's interior. Not realizing it wouldn't be done in just one afternoon. It seemed simple enough. I give you guys credit for having the patience to finish the job ...and make it look good! I would have tapped out after a few hours.
Daaaaamn the brown boys making moooves bwhaha
Put the window down and hold it up for 15 seconds to reset the windows. Both sides at the sane time.
Bukklao G37 That’s exactly what we did! Thanks for the tip!
2:14 "Just because its japanese dont mean thats a foreign car" NAV low key roasting you haha
The beeping ruined the video 😂🤦🏾♂️ it was driving me nuts
Isaiah Mullin our fault bro, rookie mistake
Good looking G. Wrap looks great for "noobs." You guys are having waay too much fun. I did my G37 the same on the dash & doors. I did the console and center cluster in 3M matte black, but I covered the chrome around the shifter in the carbon. I used the 5D so it has the deep high gloss look. If you drop the whole glove box you'll be able to get that piece to sit right. I had the same problem. You could change your cabin air filter while your in there. One tool I recommend for that job is an 8-10 inch #2 Phillips screwdriver. For the windows, roll each one all the way down, then back up. Hold the switch in the up position for an extra 15 seconds after the glass reaches the top. Viola! Windows reset.
GreyMatterStew Woah we wanna see how that looks! Thank you for the tips and we did have a lot of fun haha!
Dropped the glove box to change my cabin filter... won't go back in right. Can't get all the screws to line back up. Idk...the cops did break the glove box though. Broke the right side support. Still closes but takes finesse.
hey bro ,where can I buy the vinyl wrap
So glad i found this channel. I'm actually saving up for a down payment on a g37x coupe. Sadly it will be automatic bc it'll be my daily. And a few other reasons. My 350z will be manual tho. Hopefully I learn from this channel
Yo that’s sick man. Keep us updated on what you get!
@@caliworks6869 most definitely💯
Lol I own an auto g37 coupe and a manual 350z right now
That looks really good. I'm about to wrap mine. That's coo that you had your friends help you out. I may need some tips.
The fucking car beeping for like an hour made my head hurt lmao
Ram Sorry about that man 😂
It's because it was in neutral. Put in park and beeping will stop.
How did you wrap the centre piece with the clock and buttons? I feel like that would be hard to do?
Jordan Abel it was hard to wrap but you just cut slits in the areas with the clock and knobs and fold it in
CaliWorks does the clock and everything detach from the actual panel?
Yes
the beeping tho.... lol
Hey CaliWoks, is that a G string on the left inside your trunk/boot at 0:30 secs?
What type of wrap did you use 3D, 4D, 5D did you use 3M or Avery?
all he needed to do was shut the damn door for a second to make that stupid beeping go away
Probably should’ve unplugged the battery ?😂
Nestor Gonzalez You are RIGHT! We should’ve 😂
My windows had the same problem before when i reseted my cars ecu, all you gotta do is hold up both driver and passenger window down for 10 sec, than up 10 sec than again twice and that should be it !
M200 Dreamer Thanks man. We looked it up and got it fixed
Next all you need is to take off them nasty buttons and buy them $21 black or aluminum machine buttons they make it look so much better it's unreal that buttons can make a car that much better
If u close the driver door and then open it again it will stop the beeping. Just fyi
Whats the best website for G37x accessories? thanks!
can you post the link of where you got the wrap from?
Does the plastic feel tacky?
damn shout out my boy with the banger job on cutting out the pieces for the stereo
Me over here with the $21 pre-cut version LOL
Did the airbag light come on when you did the center console or what happen?
THYP3RR yeah it did, we had to reset it
How did you reset it? disconnect and reconnect the battery?
THYP3RR nah it was something like turning the car on, and then off right when the airbag light appears. Repeat that process five times
3 boys taking off the shifter is genuinely quality times with the boys 😂
WHAT DO YOU WANT
Awe James Cut my grass low my man
AweJames stfu
You guys have the link to where you bought the wrap?
PrinceDnA www.amazon.com/gp/aw/d/B00L9J4KKC?psc=1&ref=yo_pop_mb_pd_title
Channel will blow up soon lowkey
Ed Thanks for the support man, Hopefully!!
could i just heat the wrap and put it on and seal it using a credit card. i want to do this but i dont think i can do all that stuff you did. do you think itll work
Ahmed Tarabain You’d have to take out the interior so the wrap looks flush because a credit card won’t be able to seal some angles. Also, it might rip easily if not sealed behind the panels.
CaliWorks oh I see thanks!
Ahmed Tarabain No problem!!
Also where did u get the wrap from
Ahmed Tarabain Got you with the link! www.amazon.com/gp/aw/d/B00L9J4KKC/ref=ya_aw_od_pi?ie=UTF8&psc=1
Ik your car battery died a few days after this video... always disconnect you battery when you have your doors open for a long time or doing electrical work
Stephon Lee surprisingly it didn’t die till a couple months ago. And for sure learned our lesson
how much wrap do you think I would need to do all my interior trims including center console n all that on my g37 sedan?
my man, this looks beautiful, may i ask is the wrap flat or gloss carbon fiber?
migz it’s flat! Thank you!
What is this wrap called and where did you get it?
If you closed the passenger door and opened it again, the beeping would stop lol
Looks dope. Too scared to do it to mine tho lol
Exhaust Sports Auto MAN, we feel it! We were scared too but somehow managed haha
I did it to mine and it was easy. Good luck.
Why would you cover the center console's silver aluminum Urushi finish. It's one of the only decent finishes in the car.
quit fucking hating bitch
I’m not convinced that covering metal with plastic is an improvement..
dan428 no one is trying to convince you...
CaliWorks the title of your video says otherwise.. and I was looking for ideas what to do with my g37. Mine has the updated interior style though haven’t modded it much yet aside from LEDs and has dark tinted windows
dan428 we say it’s the best Bc of its price and looks.
its not metal its plastic, and after time it chips. Sooner or later it has to be re-covered. I like it a lot. Jus nervous if its too much black for me and my G.
I have the wood trim in my G thinking about putting that carbon fibre look on the car looks pretty dam nice.
Connor Sandberg You should do it! It has a nice contrast
Where did you get the wrap from?
What model year is your G ?
Medal Mold 2008!
looks alot better i may end up doing this to my g since i cant find a trim kit for my manual g37 sedan
Mumble I would recommend it! Fun, cheap mod. Might need to reset the airbags and windows, but it’s all good!
car alarm was PISSING ME OFF, nice car tho
Where do u get the carbon fiber from?
U dont even gotta remove all that to wrap it
15:30 ...MONEY SHOT‼️
👍🏽‼️
Wish I had friends like y’all lol
put the windows up or down and hold for 15secs
id pay you $100 dollars to do this for me lol. i could do it myself but fuck that lol
Saini lmao BET! It’s a painnnn
chill vibe, I fuck with you guys, one more sub!
Ultra_mk Fasho man, thank you for the support! Appreciate it ✊🏻
Good shit. I did mine with black aluminum and it looks dopeeeee
MAX Black aluminum would look dope too! Glad it worked out well for you, Thank you!!
Did mine with aluminum foil....its alright.
very nice, looks great!
Staggered Horizons Thank you!!
Yo I want the low pitch version of what do you want. I can't find it anywhere. Only the original. Hook a homie up 😂
We just slowed it down in IMovie lmao
Looks good
Kool dudes....enjoy your youth!
Katacus HAHA we try to! Thank you!
Katacus how old r you
53 now. The video reminds me when I was younger. Now its all about work and taking care of ex-wives.
Katacus I'm 21 I was about to get married last month But I left my girl and moved back to my parents and bought my dream car the g35 and I rather be here than married haha.
What year is your G37?
Fred Wilson 2008!
Fred Wilson 2008!
TWO DAYS?!?!
14:51 ...says it all.
Vince Fernandez ?? We started the night before and continued the next day, what’s the problem?
+CaliWorks
I was thinking of doing the same thing to my 's interior. Not realizing it wouldn't be done in just one afternoon. It seemed simple enough. I give you guys credit for having the patience to finish the job ...and make it look good!
I would have tapped out after a few hours.
BRUH DISCONNECT YOUR BATTERY
Song after 29 seconds ??anyone know 🙏
Dylan P New Freezer- rich the kid!!!!
I was suppose to do it to my bmw but I totaled it 🤫
Your bmw sucked anyway
John Arnold lmao
hey bro , where can I purchase vinyl wrap from
Taliban
Unplug the damn battery geeeeeez
Nice vid! Who’s the hottie in the stussy hoodie tho 😩🤭
Jennifer Armenta his name is Jason :)
Where did you get the vinyl?
Tevin Jeanlouis www.amazon.com/gp/aw/d/B00L9J4KKC/ref=ya_aw_oh_bia_dp?ie=UTF8&psc=1
Easy to fix windows
Mortalbryant laloo it was! We just had to reset the windows!
@14:27 your welcome
Turn off the damn car and unplug the battery! Stupid beeping noise is killing your video
Oof
those b roll are the ugliest b rolls I've seen
VortexRamFTW Stick to Minecraft let’s plays knobhead
AweJames dang you right I haven’t played in years