Congratulations to you man! You did 10X more in a 2 min video then 10 other videos did in 10-15min on how to carpet stairs. Thank you for simply doing what the video title says. Very refreshing
this guy installed the stairs perfectly, I always use a hammer, but that's what I learned with, and sure, it's loud.. whatever, it also has more power, and you need that extra power with certain carpets... either method is acceptable as long as your smart enough to know when it's time to put the mallet down, and grab a hammer... this video poster did a good job, and yeah, he used allot of staples but I'm sure any professional is guilty of that, just trying to get it done fast, and rather be safe then sorry (driving back to job a week later to for one staple) as for the woman asking how to install pattern carpet on curved stairs... You can do it, but you will need a boat load of extra carpet, and you would have allot of waste, and the installer will charge you allot of money if he is smart.. it's not a job for a beginner. .... anyway, good video, nice to see there are SOME good installers...
it looks really good doing the sides of the stairs aswell, can u do a vid on ur technique please i want to learn how? iv been fitting 5 years and never seen them b4 or been asked to do them there amazing :)
Lmao I hope you're on decent money with the amount of staples you used!! Have you forgotten what the pin is for o. The smooth edge lmao... I'm from UK and always wondered how you'd do it in the US, I think I'll stick to the way we do it, with tension and stretching, not staples lmao
Curved stairs.... (Stringers First) Apply treads... then risers.... This applies to convex and concave... really any type of custom stair other then types of Hollywood wraps I use a shur-fast stapler with Duo Fast 5418 sp 9/16 hope that helps a bit.
I'm faster than you, and use a lot less staples. Not bad tho. Just use less staples, you're making the next guys life replacing that carpet hell. Machine Gunner.
Your worried about people knowing ur faster..ill tell u what im not faster an i gurantee my shit looks way better than both u hacks..you wont find a loose string or an uneven line of staples my shits uniform an tight an thats exactly why im at the top of the pay scale...stop worrying about going faster an worry about making it nicer
Actually a rubber mallet is a good choice. 1 Its not light. 2 its quite. 3 if you are going fast and miss it doesn't hurt... mostly in this case I chose it for the fact that it is quite for the video.... In all honesty when I train ppl I get them to use a rubber mallet so when they do miss especially when learning they don't break their hand.... I use a 20oz plumb normally . Also I would like to add after 13yrs of laying floors day in an day out there is absolutely no need to beat the crotch in that hard I would say heavy solid thuds....... I end this saying I will be making more vids on various other types of floors and types of stairs/applications and well I understand its only a 1000 views but I thank ppl for the interest I expected less .... Joe
Ive installed probably hundreds of these type of steps..I especially hate the ones that have wraps on the side you have to do too...but why is every1 asking whats with all the staples?? Or telling You your not a professional and dont know how to install steps if your using any staples even??? Lmao...I dont think those people know the difference between waterfall steps and steps wrapped around the noses...how else would u get the carpet to stay up formed around the nose??? grippers??? wtf does he mean tackstrips? Personally I like this kind of look on steps over waterfall.
Thank you I was thinking the same , you need all them staples for the carpet to be tight around nosing when you stretch up or it wont hold. Over 20 yrs and never had an issue with staples under nosing
I have watched a few now so it will be interesting without the tools! I just ripped out the stair carpet and no staples on mine - just one nail at each end
+Stuart Hughes he did the stairs right lol., u want less staples so it will come off or losen up and wrinkle? as other guy said, rubber mallet idk, lol kinda light and bouncy. I use regular hammer.
If you have thin carpets. you can not do that...Die Setzstufe wird dann geklebt und die Trittstufe verspannt. I mean you should stick the step riser and wrap the step tread
Ima floor fitter from Ireland we start from the top and work down,no staples used,we just use the bolster to fit the stairs twice as quick and effective good job though 👍👍👍
The septics call it 'waterfalling'..im in manchester and i have worked it the states and trust me mate, we frigging own them for craftsmanship... pinning it under the nose is just horrible.. you and i both know doing it our way, is the right way, i can get them tight as a frog arse with a bolster and mallet.. but we should know better my dads a mick and we know the oirish built america and a half chinese half african dude thinks hes irish on st paddys day in the states... god it winds me up...
ev3nflow We also refer to it as "waterfall" ..and I sir, challenge you to a craftsmanship duel :) after I research this bolster you speak of. Cheers :)
And one day, after you decide to remove the carpet and refinish your stairs you are left with stairs having millions of staple holes. I hate to see this kind of carpeting when they are putting staples like there is no tomorrow. Try to stay away from this kind of experts! You are supposed to put staples 3 inches apart, not like this. Amateurs!
Congratulations to you man! You did 10X more in a 2 min video then 10 other videos did in 10-15min on how to carpet stairs. Thank you for simply doing what the video title says. Very refreshing
Thanks for a great video, now I know what to buy my husband for Christmas thanks again.
dude....much props man. I do this every day and I approve of your style...yeah!
this guy installed the stairs perfectly, I always use a hammer, but that's what I learned with, and sure, it's loud.. whatever, it also has more power, and you need that extra power with certain carpets... either method is acceptable as long as your smart enough to know when it's time to put the mallet down, and grab a hammer... this video poster did a good job, and yeah, he used allot of staples but I'm sure any professional is guilty of that, just trying to get it done fast, and rather be safe then sorry (driving back to job a week later to for one staple) as for the woman asking how to install pattern carpet on curved stairs... You can do it, but you will need a boat load of extra carpet, and you would have allot of waste, and the installer will charge you allot of money if he is smart.. it's not a job for a beginner. .... anyway, good video, nice to see there are SOME good installers...
Great video thank you. What size nail, staples, gun did you use?
that carpet aint going nowhere!!!
it looks really good doing the sides of the stairs aswell, can u do a vid on ur technique please i want to learn how? iv been fitting 5 years and never seen them b4 or been asked to do them there amazing :)
ruclips.net/video/KgJxg7jCcpQ/видео.html
FINALLY !!!!!! Good vid man that a the right way to do I use more staples than that lol
Nice job! Could you tell me what type of staple gun and what size staples do you use? thanks
MusicbyRiver duo fast is the best
ruclips.net/video/KgJxg7jCcpQ/видео.html
Lmao I hope you're on decent money with the amount of staples you used!! Have you forgotten what the pin is for o. The smooth edge lmao... I'm from UK and always wondered how you'd do it in the US, I think I'll stick to the way we do it, with tension and stretching, not staples lmao
What about around a curved staircase / winder?
Curved stairs.... (Stringers First) Apply treads... then risers.... This applies to convex and concave... really any type of custom stair other then types of Hollywood wraps I use a shur-fast stapler with Duo Fast 5418 sp 9/16 hope that helps a bit.
Few more staples please! Lol good vid though!
Musta been a new box??? ;))
Mostly humble 1:P
ruclips.net/video/KgJxg7jCcpQ/видео.html
here in the uk we use grippers not a million staples
how do you use grippers underneath the lip.
Must be a pain in the ass
i no longer have access to this channel ... but ill reply to this they fucking waterfall it all like lame asses
Joe Smackdown yea because a whole lot of nails is better 😂
🤩
Make a vid on fitting carpet on each side of the stairs
NICE VIDEO
I'm faster than you, and use a lot less staples. Not bad tho. Just use less staples, you're making the next guys life replacing that carpet hell. Machine Gunner.
Prove it! Make your own video!
Nothing wrong with adding more staples rather it last and not come loose then to worry about replacement
Your worried about people knowing ur faster..ill tell u what im not faster an i gurantee my shit looks way better than both u hacks..you wont find a loose string or an uneven line of staples my shits uniform an tight an thats exactly why im at the top of the pay scale...stop worrying about going faster an worry about making it nicer
hey guys I lost the ability to access my account this is my new channel and I will start making more vids ASAP sorry for my absence 😎
Actually a rubber mallet is a good choice. 1 Its not light. 2 its quite. 3 if you are going fast and miss it doesn't hurt... mostly in this case I chose it for the fact that it is quite for the video.... In all honesty when I train ppl I get them to use a rubber mallet so when they do miss especially when learning they don't break their hand.... I use a 20oz plumb normally . Also I would like to add after 13yrs of laying floors day in an day out there is absolutely no need to beat the crotch in that hard I would say heavy solid thuds....... I end this saying I will be making more vids on various other types of floors and types of stairs/applications and well I understand its only a 1000 views but I thank ppl for the interest I expected less .... Joe
ruclips.net/video/KgJxg7jCcpQ/видео.html
Ive installed probably hundreds of these type of steps..I especially hate the ones that have wraps on the side you have to do too...but why is every1 asking whats with all the staples?? Or telling You your not a professional and dont know how to install steps if your using any staples even??? Lmao...I dont think those people know the difference between waterfall steps and steps wrapped around the noses...how else would u get the carpet to stay up formed around the nose??? grippers??? wtf does he mean tackstrips? Personally I like this kind of look on steps over waterfall.
Thank you I was thinking the same , you need all them staples for the carpet to be tight around nosing when you stretch up or it wont hold. Over 20 yrs and never had an issue with staples under nosing
I have watched a few now so it will be interesting without the tools! I just ripped out the stair carpet and no staples on mine - just one nail at each end
This is a DIY video for sure, not a professional fitting service, good effort, but whats with the million staples.
+Stuart Hughes he did the stairs right lol., u want less staples so it will come off or losen up and wrinkle? as other guy said, rubber mallet idk, lol kinda light and bouncy. I use regular hammer.
@@patrickgarrett3814 the mallet is heavy af actually and works great ... and its great since no twang twang twang ...
@@patrickgarrett3814 ruclips.net/video/KgJxg7jCcpQ/видео.html
@@patrickgarrett3814 yup check this
ruclips.net/video/KgJxg7jCcpQ/видео.html
by the way.... Don't listen to the other people this is how the industry goes trust me I know.
He smashed the fuck out of it with staples but in the modern world aka United Kingdon we use grippers
Is 50 staples a stair too many? Your right around that many..
I wanna know about how to wrap the side rails... everyone only shows how to do the stairs.
stair stringer upholstery
If you have thin carpets. you can not do that...Die Setzstufe wird dann geklebt und die Trittstufe verspannt. I mean you should stick the step riser and wrap the step tread
lol the right way my ass your doing it the hard way
i think everybody in these fucking comments does it the right way.
nice hustle i shoot with no riser sticks faster though :}
I want to know how to install pattern carpet on curved stairs. Does anyone know how to do that? That can tell me how.
I've watched 5 of these vids so far, and everyone has done it a different way. And whats with all the bloody staples????
If all fails add 10,000 staples
Right way, but your kicking is surely weak.
More staple than carpet.
clearly iv been doing it all wrong for the last 41 years
Ima floor fitter from Ireland we start from the top and work down,no staples used,we just use the bolster to fit the stairs twice as quick and effective good job though 👍👍👍
The septics call it 'waterfalling'..im in manchester and i have worked it the states and trust me mate, we frigging own them for craftsmanship...
pinning it under the nose is just horrible..
you and i both know doing it our way, is the right way, i can get them tight as a frog arse with a bolster and mallet..
but we should know better my dads a mick and we know the oirish built america and a half chinese half african dude thinks hes irish on st paddys day in the states...
god it winds me up...
ev3nflow We also refer to it as "waterfall" ..and I sir, challenge you to a craftsmanship duel :) after I research this bolster you speak of. Cheers :)
Damm I wish I could access my account RUclips .....
staple city?????????????
And one day, after you decide to remove the carpet and refinish your stairs you are left with stairs having millions of staple holes. I hate to see this kind of carpeting when they are putting staples like there is no tomorrow. Try to stay away from this kind of experts! You are supposed to put staples 3 inches apart, not like this. Amateurs!
removal is what it is .... if you do not use enough staples on the bull nose your stairs will smile at you more staples equals sexier crisp lines 😎
Need light
A rubber mallett with a stair tool , really? Ever heard of a hammer? No way those steps are chiseled properly
Rubber mallet is the way to do it and easily gets it into gripper properly! Normal hammer smashes the hell out of your bolster and is way to noisey!
Are you on drugs??? Why are you going so fast
If you want you can learn from WoodPrix scripts how to make it yourself.
omg its not a race
IM BACK LETS GO !!
ruclips.net/video/KgJxg7jCcpQ/видео.html
why are you rushing a video when you're trying to show peolpe how to do it ? you sound out of breath
this is not good