People don’t know anything but that’s not even the worst part about the washer going crazy they use a mop to hold the washer still at 1:30 people are dumb in this video
I had the same experience, I had to call the priest to do a exorcism with holy water.after the prayer four demons came out in the shape of shipping bolts🤣🤣🤣🤣🤣
Your shipping bolts are still in. the 4 bolts on the back of the machine that hold the drum in place so it doesn't get damaged during shipping. There should be a page in the owner's manual on how to remove them.
Lacey Barbee i agree but it can be dangerous, the cause of the craziness of the samsung washed was due to the transport bolts wich were NOT removed, if you ever get a New washer, Remember to remove all transport bolts, if not removed, they can do more Damage to the machine, sometimes even critical Damage.
Your shipping bolts are still in. 4 bolts on the back that hold the drum in place so it isn't damaged in shipping. When they're in its using the case as its suspension. There's a page in your owners manual on how to remove them.
Karen was apparently too smart to be bothered with reading the instructions before using the washer.. Which is brand new and now severely damaged.. Which of course isn't her fault and demands a replacement free of charge.
It looks like the problem it's doing that is because you left the shipping bolts in the back. See the yellow squares on the back. I bought this washer and installed today. It didn't do anything close to what yours is doing. Take the bolts out and see how it does. It could have caused more damage running it so long.
@@Paulgary11 The drum can spin freely even when the transit bolts are installed! It’s not connected to them, as some people believe. It’s the tub that is secured with the bolts.
This is what I call an Operator Error. (1) You left the transit bolts in the back of the appliance, (2) You failed to read the Owners Manual, (3) You just let it continue shaking, letting it cause more possible damage to your home and its self.
@@johndeerefan725 After this, I would say the frame is dented, the drawer might need to be replaced, and other hoses and plastic parts may need to be replaced.
No wonder those people never learn the front washing machines, have to remove shipping bolts before you operate it or damaged the washer and warranty wouldn't cover this
Warranty probably won't cover this, it could already be severely damaged, or be almost internally destroyed, the bolts are seen on the back at the end of the video
not many people realize when getting a brand new washing machine especially the front load type there is a tool that comes with the brand new washing machine. people mistakenly throw it away not knowing that is the tool to remove the shipping bolts that would save a lot of money even just to remove the shipping bolts. A very common mistake people make when throwing the tool away thinking it is a useless piece of metal. that useless piece of metal people think it is turned out to be what removes the shipping bolts. shipping bolts are only for transporting washing machines that can get damaged during transport. shipping bolts are 100% safe to remove for washing machines and are yellow in color.
Washer: DUDE, LETS GET OUT OF HERE! Dryer: brother, Stop trying. you can't leave the room. Washer: YES I CAN MAKE IT OUT OF HERE! COME ON, HE- *gets unplugged* Dryer: See? You cant make it out of the room.
No, the washing machine would’ve been working perfectly fine if they removed the shipping bolts (or transit bolts). Warranty would definitely not cover it.
How to stop this from happening Step 1:remove the transport botls at the back of the washer Step 2:make sure the load is even inside Step 3:put the washer on an even surface Step 4:don't put too much washing in the washer Hope this helps
Your right! It's not right, not in the slightest! You see those 4 yellow things in the back, those are shipping bolts and they must be removed before any kind of use of the machine, it's like that for all washers.
Now this is what I don’t really care for front loading machines, used to have a Kenmore front load washer in my laundry room and always scared the ever living hell out of me when it went into spin and would always find the machine crooked after if was done and yes the shipping belts were removed and the feet were level and always made sure it was properly loaded and always managed to go off balance and move itself. Ever since I’ve had my vintage Maytag and Whirlpool machines never had issues with them going off balance unless I deliberately didn’t load the machine properly.
I just see the transit bolts in at the end of the video, just take them away and your issue is solved, hope you didn't ruin the washer because of this tremendous shake.
Looks like you've learned your lesson the hard way, 1:38 you see those 4 yellow things in the back, THOSE ARE SHIPPING BOLTS THAT YOU MUST REMOVE BEFORE ANY USE OF THE MACHINE! IDK WHY YOU WOULD USE A MOP TO STOP IT FROM VIBRATING LIKE CRAZY, THERE'S LITERALLY A PAUSE BUTTON ON THIS MACHINE. Also next time read the manual, it's more useful than you would ever think!
You left shipping bolts in because you are running this washer. Level the washer. Make sure that you cannot overload the washer with heavy items. If you left shipping bolts in and you can’t level the washer, it will break.
Rusty: “(Shy) (Rusty Smiles) I Got My 🧡 Orange Short Sleeved T-Shirt With 🤍 White Stripes On My Body And I Got My 🖤 Black Shorts Also On My Body And I Got My 🤍 White Above The Ankle Socks On My Feet And I Got My 🧡 Orange Running Shoes Also On My Feet! 🧡!”
The reason it’s happening is because maybe the transport/shipping bolts are still in. The bolts are in there to keep the washer in place so it doesn’t get damaged, i recommend to remove the transport bolts. You can see them because they are yellow. Try removing them. They will help not shake so much.
1:09 it's attacking the dryer lol
It’s saying it needs a Samsung dryer
@@BrUh-lu7zy its saying it needs samsung compsany dryer not this dryer
@@BrUh-lu7zy lmao
JUST
REMOVE
TRANSIT
BOLTS
REMOVE REMOVE RTRANSIT BOLR OR THISHAPPENS
People don’t know anything but that’s not even the worst part about the washer going crazy they use a mop to hold the washer still at 1:30 people are dumb in this video
Ha ha!
Hee hee.
Te
I had the same experience, I had to call the priest to do a exorcism with holy water.after the prayer four demons came out in the shape of shipping bolts🤣🤣🤣🤣🤣
Im fucking dying over here😂
IM NEVER GONNA FORGET THIS
😆🤣😂😹😆🤣😂😹😆🤣😂😹😆🤣😂😹
The best You tube comment award goes to Mauricio Molina 🥳😇
Кгклцшашцшуоцщпгклцгашцгугушцкшцшагулаоалаоцлалклаокшкшкшкшаоашцшпшвол🌝🌝🌝🌝🌝🌞🌝🌝🌝🌝🌝🌝🌝🌝🌝🌝🌝🌝🌝🌝🌝кшкщашвшцшкгцщпшцщвшешвщущущщкалащвдплвдвщцдклузалащцзкллущашкщцзалкщкдклушвшушшщшшшушвшвшашушушцщашашцдашушвщулклвщалел3кш3шкак
Ша
Шшак
Кш
Ашгослвлушулулашуовлуашшкшкшкшккшлкшаашаш
ЙйцлцлклййййййййййййййцлалцлулылулвлулашалалаоалалаоКшкшколалклвлаоплалклвлклклаокококщулкушк384щ2кщ48кщ48щ3лаьалаллвлвл344щщ2кщУЛШКШЦШКЛУОУОЦШАШАШАША
This is what happens when people don't read the manual.
Yep
Agree
@@picibangosxd2784 пмттплт, моим с
@@user-rr9ne8in1r Can’t understand ur language
1:33 how is the mop going to help
Your shipping bolts are still in. the 4 bolts on the back of the machine that hold the drum in place so it doesn't get damaged during shipping. There should be a page in the owner's manual on how to remove them.
You can see that you left the yellow shipping bolts in and they need to be removed before you operate the machine!!!
@@brando-1283 4
Bingo!
I dunno why I find off balance washing machines funny, but I thought this was hilarious. That washer needs tamed big time
Lacey Barbee i agree but it can be dangerous, the cause of the craziness of the samsung washed was due to the transport bolts wich were NOT removed, if you ever get a New washer, Remember to remove all transport bolts, if not removed, they can do more Damage to the machine, sometimes even critical Damage.
Its wasn't off balanced they forgot to take the transport bolts out!
@Mario Martinez Yeah
Uh...the speed is 2 thousand rpm
Same
THAT WASHING MACHINE IS DRUNK!!! but fr tho transit bolts
Палвмраегшкгжггзгг
Is your washer running? Yes, its running around the room right now. XD
Your shipping bolts are still in. 4 bolts on the back that hold the drum in place so it isn't damaged in shipping. When they're in its using the case as its suspension. There's a page in your owners manual on how to remove them.
Karen was apparently too smart to be bothered with reading the instructions before using the washer.. Which is brand new and now severely damaged.. Which of course isn't her fault and demands a replacement free of charge.
@@Captain_Crayzay Maybe someone installed it for karen?
It looks like the problem it's doing that is because you left the shipping bolts in the back. See the yellow squares on the back. I bought this washer and installed today. It didn't do anything close to what yours is doing. Take the bolts out and see how it does. It could have caused more damage running it so long.
I got the same washer as in the video and got it installed on August 9, 2019 and the man that installed it removed the shipping bolts
The drum has to spin freely
@@Paulgary11 The drum can spin freely even when the transit bolts are installed! It’s not connected to them, as some people believe. It’s the tub that is secured with the bolts.
😁😁😁😁😁😁❤❤❤❤❤❤❤
We had just got a new washer and once we saw videos on the troubling a shaking machine we solved the problem
This is what I call an Operator Error. (1) You left the transit bolts in the back of the appliance, (2) You failed to read the Owners Manual, (3) You just let it continue shaking, letting it cause more possible damage to your home and its self.
Who knows how much damage was already done to the washer itself.
@@johndeerefan725 After this, I would say the frame is dented, the drawer might need to be replaced, and other hoses and plastic parts may need to be replaced.
@@cadonbarton1933 the cost would be as much as a new washer.
@@johndeerefan725 Probably but I have seen machines shake this bad, bounce back and work just fine for years
Everybody all ready said that what's the point if it's all ready said
No wonder those people never learn the front washing machines, have to remove shipping bolts before you operate it or damaged the washer and warranty wouldn't cover this
Warranty probably won't cover this, it could already be severely damaged, or be almost internally destroyed, the bolts are seen on the back at the end of the video
A washer in my building's laundry room did that once. It creeped me out LOL
1:09 "OUT OF MY WAY, DRYER!!!" xD
Dryers like what the hell are you doing
Dryer: Can you pls stop hitting me control your speed.
Washing machine: i cant control it, i have too much horsepower.
Dryer: Really Samsumg
not many people realize when getting a brand new washing machine especially the front load type there is a tool that comes with the brand new washing machine. people mistakenly throw it away not knowing that is the tool to remove the shipping bolts that would save a lot of money even just to remove the shipping bolts. A very common mistake people make when throwing the tool away thinking it is a useless piece of metal. that useless piece of metal people think it is turned out to be what removes the shipping bolts. shipping bolts are only for transporting washing machines that can get damaged during transport. shipping bolts are 100% safe to remove for washing machines and are yellow in color.
Washer: DUDE, LETS GET OUT OF HERE!
Dryer: brother, Stop trying. you can't leave the room.
Washer: YES I CAN MAKE IT OUT OF HERE! COME ON, HE-
*gets unplugged*
Dryer: See? You cant make it out of the room.
XD
1:08 it is pushing the dryer away
Poor dryer
The washer is pushing the dryer.
It fights for a samsung dryer lol
Everyone gangsta till the washing machine start walkin
Should've removed the bolts...
"toss your dirty shoes in my washing machine,heart"
The washing machine is certainly having a tantrum 😂😂😂
No, the washing machine would’ve been working perfectly fine if they removed the shipping bolts (or transit bolts). Warranty would definitely not cover it.
How to stop this from happening
Step 1:remove the transport botls at the back of the washer
Step 2:make sure the load is even inside
Step 3:put the washer on an even surface
Step 4:don't put too much washing in the washer
Hope this helps
1:09
Washing machine: ah a dryer?since u have me then why do u need this
Also washing machine: move Outta here
Dryer: stop dancing like crazy
1:18 Samsung Washer:NOM NOM NOM Dryer:HEY!
Too much horsepower
@@Android_UserThe3rd that washer was pushing that dryer it’s so funny
Стиральная машина Samsung я тебя тоже люблю очень сильно ❤❤❤ молодцы
HARDKORE KILLER POSSESSED WASHER ( DJ AniMe RMX)
OMG even after she was unplugged she still running
The drum was moving quick and was stopping
@@Mr_D2_1004N yes, rose, you’re kinda an idiot.
I NEVER SEEN A WASHING MACHINE DO THIS BEFORE
All because they didn't remove the transit bolts.
The soap dispenser was like I’m out bois
Right after this happened, the washer and dryer separated due to irreconcilable differences.
lol
Make sense
Shipping bolts must be removed before you can operate this!
ที่ล็อกถัง 4ตัวไม่เอาออก เครื่องก็เลยสั่น เครื่องฝาหน้า ต้องเอาออก
I'm no washer doctor, but I don't think that's right
Your right! It's not right, not in the slightest! You see those 4 yellow things in the back, those are shipping bolts and they must be removed before any kind of use of the machine, it's like that for all washers.
Uh oh washer is being a physco
Washer attacking 😂😂😂 my nightmares be like😂
first you need to remove the shipping locks on the back of the washing machine 😒
Next
There are the shipping bolts clear as day some people just don’t learn
Washer: I want to fly around and destroy something and myself
Dryer: You are going boom
Now this is what I don’t really care for front loading machines, used to have a Kenmore front load washer in my laundry room and always scared the ever living hell out of me when it went into spin and would always find the machine crooked after if was done and yes the shipping belts were removed and the feet were level and always made sure it was properly loaded and always managed to go off balance and move itself. Ever since I’ve had my vintage Maytag and Whirlpool machines never had issues with them going off balance unless I deliberately didn’t load the machine properly.
Well in this case you can clearly see the shipping bolts were never removed.
Wow
Washing machine: *goes godmode*
Washing machine destroys itself and wants to get out of the kitchen lol 😂😂😂😂
It selfdestructs because their dumb owners wouldn’t read the manual and wouldn’t take out the transit or shipping bolts.
Take out the shipping bolts or you will break it!!
This washing machine is still running on a cycle because it won’t stop while it is very unbalanced!
That samsung front lolder was shaking during the spin cycle
You need to put the yellow shipping bolts out before operation! 😀 Just a tip.
im stupid
If my washing machine ever acted out like this I’d give it a firm spanking.
Its an appliance bro chill
Take the transport bolts out!
Overload and unlevel to
@@boschhotpointfan8354 OK
Samsung front load shaking, moving and bouncing while spinning!
Angelica The Dryer: "Oh Snap!"
When you don't remove the transit bolts
D gcsfrybt
En la traila entonces las videollamadas
Lol you suppose to take off the bolts in the back because if you leave them in to long you could damage the machine
Dryer said: Hey Samsung! Stop pushing us! We are going to have a peaceful day!
Melissa The Washing Machine: "Oh Snap!"
I just see the transit bolts in at the end of the video, just take them away and your issue is solved, hope you didn't ruin the washer because of this tremendous shake.
Tranport bolts
those yellow transit bolts are used to secure the drum during transit....
Washer: you vintage crap BUY A SAMSUNG DRYER OR I DESTROY HOUSE
I know right it looks so ugly having two different companies
What the washer was actually telling them to do: REMOVE MY DAMN TRANSIT BOLTS YOU DUMB OWNERS
@@tin.1 ha lol
Looks like you've learned your lesson the hard way, 1:38 you see those 4 yellow things in the back, THOSE ARE SHIPPING BOLTS THAT YOU MUST REMOVE BEFORE ANY USE OF THE MACHINE! IDK WHY YOU WOULD USE A MOP TO STOP IT FROM VIBRATING LIKE CRAZY, THERE'S LITERALLY A PAUSE BUTTON ON THIS MACHINE. Also next time read the manual, it's more useful than you would ever think!
Is not cool
They forgot to remove soul before turning on! :D
You left shipping bolts in because you are running this washer. Level the washer. Make sure that you cannot overload the washer with heavy items. If you left shipping bolts in and you can’t level the washer, it will break.
The bolts are still in 😂
Rusty: “(Shy) (Rusty Smiles) I Got My 🧡 Orange Short Sleeved T-Shirt With 🤍 White Stripes On My Body And I Got My 🖤 Black Shorts Also On My Body And I Got My 🤍 White Above The Ankle Socks On My Feet And I Got My 🧡 Orange Running Shoes Also On My Feet! 🧡!”
No fck u
@@ytssiemipentoelo SHUT UP MEANIE!!!!
Its like one of the workers fell in the washer on spin cycle 😂😂😂 xxx
Take the transport screws, they stay at the back of the washing machine (the orange bolts)
This machine is crazy
01:08 it attacking the Dryer
Guys! Important. If the machine jumps, unscrew the 4 transport bolts and put the plugs on!
ATTACKS A DRYER! 1:07
That washing machine is crazy
They decided to go on the very very old washing machine
I don't know why but this is pure comedy xD
SAMSUNG TRIES TO FLY!
Washer:I SEE A PUDDLE ILL GO TO IT
Dryer:no no no you will boom!
Gets hitten
Washer:I don’t care about you
Running to the puddle
Dryer: you’ll see!
Por que tu lavadora o secadora tiembla mucho?
Bueno que le metiste una pesa?
washers when you don't read the manual
The reason it’s happening is because maybe the transport/shipping bolts are still in. The bolts are in there to keep the washer in place so it doesn’t get damaged, i recommend to remove the transport bolts. You can see them because they are yellow. Try removing them. They will help not shake so much.
1:40 ALL 4 SHIPPING BOLTS ARE IN
Транспортировочные болты выкрутите😂
Just remove shipping bolts to prevent noises!!
What is model samsung washing machine?
1:01 - 2:02 try not to laugh or grin
Darling? Did you remove those screws on the back? :D
my grandmas washer used to jump around
That washer explodes
That drainpipe came out of the wall at 1:01
WASHER FLIES LIKE CRAZY!
transportation bolts are always forgotten. 😏
WASHER JUMPS AND FLIES WITH SHIPPING BOLTS!
I'm thinking of the freaking toster from ghostbusters 2 lol
1:19 completly possesed
No
1:30 Broken washing machine
Do you still have the washing machine?????
I think you left the transport bolts in
I decided I wanted a GE Toploader washer
1:09 :samsung washer: i hate you maytag! :maytag dryer: idc i wish you was replaced >:(
Never
Транспортировочные болты выкрутить надо
Everybody gangsta until the washer is angry and doesn't like his new home
the way the washer just stared at her😓