Last time you guys raced you could really see that you weren't running a swaybar. At wide open throttle the calypso was really rolling over on to the passenger side. You're a lucky son of gun! I wish my son would take an interest in mustangs. Doesn't look likely though. That's cool that you have that relationship with him. Enjoying the hobby together.
Vacuum lines are hard to pin down. People have different setups and needs on their cars. I’ll try to figure out a way to cover some options in vacuum needs at some point. It’s something I’ll have to research
@BREW2L , completely irrelevant to this video but I tried a product on my fox called Evapo-rust and this stuff completely blew me away, reason why I’m telling you is I thought about your fastback when I reveled the paper towel and it didn’t even look like any rust was ever there. I’m not trying to plug this product on you but check out a couple videos if you get a moment.
Andrew in the House!!! Luv the Artic. .... No one gave a duck when the goose got loose,quack quack quack....lol...." I forgot it was a standard" classic.gotta luv this channel
The notch is stock but still looks sweet. So I just put the Almighty Bcam in my fox. It sounds like a badass. Any tips on making it right. Like timing. tps voltages. Or anything you’ve come across over the years. Thanks man. Also installed an explorer intake I polished myself. With the 65mm Tb. I’m thinking she’s gonna move when I tune her up with help from you 💪🏻.
@@BREW2LFOXBODY that’s right I remember watching that before. Hey I just remembered when you put antifreeze back in the radiator do you have to fill it up and stick a hose in it to burp? Lol I remember something crazy like that
Love this vid. Reminds me of my dad and i working on stuff. He was full of knowledge watching me work while i was full of myself cause i could turn a wrench. Lol
I’ll just ask this here, so my cars iac one day stopped working, the iac has been replaced 3 times, I’ve tested the connector and it has the proper 12v, I cleaned my 10 pin connector, I checked all my grounds as well, car has no codes, no vacuum leaks and no blown fuses, could this be an issue with the ecu?
To add on I’ve replaced my maf, tps, air and coolant temp sensors, my iac ohms out fine to, I was not able to find anything wrong with the wiring all the way back to the 10 pin
That's the car I seen going across 84!! I doubt there are 2 clean white notches in Dothan. Tell him I gotta a 240 with his name on it. I'll race him for the trade.....lol
@@BREW2LFOXBODY Lol.....is there someone with s foxbody that you don't like you could set that deal up with?? Lol Dothan has too many foxbodys. You guys are hogging them up. I listed my car in the Dothan craigslist and I live in Pensacola. We don't got any foxbodys over here. Lol
Nice to see yall cut loose today. When i get rocking and rolling. Gonna slide on through and drink a beer with yall. We can shit on each others cars all night. 🍺😉👍
Hey I got a question when you set the timing add whatever you want it let’s say hypothetically 12° and put back the spout connector will the timing jump to like 25° , So what I’m trying to say is will the timing move up after you put the spark connector in or is it supposed to stay at wherever you put it to
How did you did you make her so sweet? If i would have told my daughter i wanted butter she would have said "then go get some" lol. Shes too much like me.
Thinking about buying some headlight for the artic fox. What you guys think?
I think they already started a Go Fund Andrew page 😆
Yeah it’s time 😂
Get the clear I love mine.
yea, past due for a new set
I dig the factory oxidized look. Mine looks the same. But 1 thing is mine isn’t as clean as yours
Andrew gets a little talkative with liquid courage!!! Enjoyed this guys a lot !!!
My kind of video, buzzed mechanics are the best
Just liking for the Cody Jinks clip!
Last time you guys raced you could really see that you weren't running a swaybar. At wide open throttle the calypso was really rolling over on to the passenger side. You're a lucky son of gun! I wish my son would take an interest in mustangs. Doesn't look likely though. That's cool that you have that relationship with him. Enjoying the hobby together.
Love the honesty you always bring brother! Keep up the great content man! 👍
I'm all about my slow 83. I mean, it sounds great and is a stick. But its so nice top down in the summer.
Congrats on 30k buddy!
You boys ain’t right
I won’t deny that 🤣👌
I been after a 89 lx notch behind the shop for 4 years. Dude sold it. I've asked about it 10xs. Darn it.
can you please do a video on vacuum lines? Which ones you need, which ones you don't, help with identifying them, fixing them.
Vacuum lines are hard to pin down. People have different setups and needs on their cars. I’ll try to figure out a way to cover some options in vacuum needs at some point. It’s something I’ll have to research
@BREW2L , completely irrelevant to this video but I tried a product on my fox called Evapo-rust and this stuff completely blew me away, reason why I’m telling you is I thought about your fastback when I reveled the paper towel and it didn’t even look like any rust was ever there. I’m not trying to plug this product on you but check out a couple videos if you get a moment.
BTW...Love you keeping family involved!👍
I always enjoy watching Andrew and you “quack” around!
Tell Andrew to get that black car ready, would love to see it at Ford Takeover too!
He’s definitely trying!
It will be there!
Andrew is funny af 😂😂
You guys are too funny together! 🤣
The quack masters 😂😂😂😂
Richardson 112 ftw. Best hats!
Whats the date for ford take over?
7-8 of may
Where will it be held at?
Andrew is feeling good. Lol
Thats a really nice fox i would have kept the automatic trans.
Great video dude good times🤙
You guys were quaking it up 😆
🤣😂
Andrew in the House!!! Luv the Artic. .... No one gave a duck when the goose got loose,quack quack quack....lol...." I forgot it was a standard" classic.gotta luv this channel
Lol Andrew bout killed me 😆🤣
The two dislikes are from people with slow foxbodys
😆👌
#Butter on the muffins
This! ☝️🙌
Tell Andrew to send me his headlights.... I’ll restore them bitches for him! Clean ass car with foggy ass lights. 🤦♂️
😂😂😂👌
Just a great video ✅💪👍
This question is for Andrew. Are you running spacers on the front wheels? I’m looking at your wheel tire setup for my 1990 GT.
See Andrew Back in the house 🏠 awesome video Bro
Ill be there on thursday
Well be there Friday around lunch
Im sure ill run into ya
Hats? Couldn't find them
Should be on shopbrew2l.com. We still have a few left
Great time with family.
Will you do a video on budget jackstands and floor jacks? I am looking to get some new tools and have no idea what to get.
The notch is stock but still looks sweet. So I just put the Almighty Bcam in my fox. It sounds like a badass. Any tips on making it right. Like timing. tps voltages. Or anything you’ve come across over the years. Thanks man. Also installed an explorer intake I polished myself. With the 65mm Tb. I’m thinking she’s gonna move when I tune her up with help from you 💪🏻.
Nice! Yes check out my base idle reset video. “CLEAN SLATE”
@@BREW2LFOXBODY that’s right I remember watching that before. Hey I just remembered when you put antifreeze back in the radiator do you have to fill it up and stick a hose in it to burp? Lol I remember something crazy like that
I used a funnel pushed into the radiator 👌
@@BREW2LFOXBODY gotcha thanks man.
Then headlights look like some Dijon Mustard 😂😂😭😭
🤣🤣😆
Any tips or tricks to get the balancer on? Did you use an installer tool?
Love this vid. Reminds me of my dad and i working on stuff. He was full of knowledge watching me work while i was full of myself cause i could turn a wrench. Lol
And that’s a wrap good video brother 💪🏻
I’ll just ask this here, so my cars iac one day stopped working, the iac has been replaced 3 times, I’ve tested the connector and it has the proper 12v, I cleaned my 10 pin connector, I checked all my grounds as well, car has no codes, no vacuum leaks and no blown fuses, could this be an issue with the ecu?
To add on I’ve replaced my maf, tps, air and coolant temp sensors, my iac ohms out fine to, I was not able to find anything wrong with the wiring all the way back to the 10 pin
Andrews coupe vs the Retro Fox and.... the Lightning! The Lightning with a tire should go mid 8! Get Andrew some HEADLIGHTS! Lol.
He’ll kill the retro but we’ll try it
🤣😂👌
Andrew is a slacker
Yes he is loooool
That's the car I seen going across 84!! I doubt there are 2 clean white notches in Dothan. Tell him I gotta a 240 with his name on it. I'll race him for the trade.....lol
he ain’t trying to loss his coupe bro 😆😆😆
@@BREW2LFOXBODY Lol.....is there someone with s foxbody that you don't like you could set that deal up with?? Lol
Dothan has too many foxbodys. You guys are hogging them up. I listed my car in the Dothan craigslist and I live in Pensacola. We don't got any foxbodys over here. Lol
Your lmrcode isn't in your description
BREW2LFEB should still work
Sorry im late!!!!!!
I couldn't find the hars
If Andrew doesn't wanna support you.. censor him.. make him look foggy or put a black box over him 😂😅🤣🤭🤗
Definitely gonna get a hat bro
Im still voting for the 69? fast back Calypso clone or should I say foxbody calypso clone????😉🔫 double trouble baby!!!
That would be different.. 🤔
Quickest I ever got here
😆
Nice to see yall cut loose today. When i get rocking and rolling. Gonna slide on through and drink a beer with yall. We can shit on each others cars all night. 🍺😉👍
Haha I’m ready for Ford Takeover
You guys are having way too much fun 😂. Poor Andrew, always taking sh*t....poor guy. 😅
Congrats on the 30K subs! Get to work Andrew.
Thanks brother
Can we start a go fund me for andrews headlights lmao 😂
Lmao 👌
Lol I was thinking the same thing on my garage to look at how to vids. Especially our fellow fox guys
Always learning!!
Love the Andrew channel. Other content is cool too I guess.😎
love the beer and wenches thumbnail, cldnt not click! ha. loyal like the other subs, wenches or wrenches
Lmao you know I appreciate ya bro 😎
Y’all sleeping on them aods
Them aod’s sleepy 😴 😂
@@BREW2LFOXBODY 😂😂
I’ll help push the calypso clone on the trailer as long as it comes to my house 😂😂😂
Loooool
What you need to do is a video on polishing Andrew's headlights, dam they are worse then mine.
These headlight comments tho 👌😂😆
I want more 65 content.
Man i wish i could take my foxbody so you could just inspect it and that way you can tell me what it need and stuff
Is Andrew coming to ford take over. If so ill bring him some Debbie cakes..lol 😂🤣
Yes and plz do that! 😂 everyone needs to bring him some snack cakes 🍰 🤣😆
Andrew stepped on a frog. 10:02
the way things keep goin with my landlord i might give you a chance to buy/build another project. 89lx with a '93ho t5.
Yo Brew2l what's your beer of choice?
Whiskey 🥃 😆 but if I have to drink beer it really doesn’t matter to me
Hey I got a question when you set the timing add whatever you want it let’s say hypothetically 12° and put back the spout connector will the timing jump to like 25° , So what I’m trying to say is will the timing move up after you put the spark connector in or is it supposed to stay at wherever you put it to
It advances when you put the spout in
@@sav22rem22 yes
@@mikemarks1834 Yeah that’s how it should be
@@sav22rem22 ok thx
Damn I guess my f250s Dragy time wasn’t too bad. Sorry Andrew 😂🤣
So what’s the total timing? :)
No clue that’s a very controversial subject.
@@BREW2LFOXBODY I hear ya man! Everybody tunes differently. Love the channel man! Thanks! From 🇨🇦!!
I can’t believe they drill the front bumper of your sons car for that license plate bracket! 🥺🥺
Send me Andrews hat!
First. Keep up the great content 👍
😎👍
@@BREW2LFOXBODY sell me the retro fox lol
How did you did you make her so sweet? If i would have told my daughter i wanted butter she would have said "then go get some" lol. Shes too much like me.
Lol I just got lucky. Look how Andrew turned out, there’s always a bad apple in the bunch 😆😆
to much chit chat.
Sorry for enjoying ourselves
If you want to see a slow Fox body hell I'll just send you a picture of mine LMAO.
😂
Just leave on Andrew....hahha...2nd honk, peace lol
I’ll do it 👌😆
I'm way too early, again. Hey guys make sure y'all hit the thumbs up for our boi, and if'n ya aint subscribed your missing out.
Andrew is your son correct?
Yes
@@BREW2LFOXBODY haha ok! man y’all seem like best buds! Pretty cool
We definitely have a good time 😆👌
ArticFox's headlights are kinda dull..... Just like Andrew.....J/K Andrew.
👀😆😆😆😆
😂
Why is andrew have a negative out look on working on his fox and feels weird on vid? Be proud of having fox notch. lol😁
He’s weird 😆😆