Great, ver smart design! Including nice and smart pitch changing system (axle within hollow axle). Lightweight and Easy to transport. All very light, flexible and good.👍👌
You are creative and make good designs, catching free energy. I watched your video with my children and wife and they also enjoyed it. I am happy that you are still well in Japan and I pray for you.
Good afternoon my name Journeyman Richard Muenzer I'm a Carpenter. And being this is 9 years old is this wind turbine still running and are you doing any more... I thought of something similar but lots smaller. Remote control airplane motors.
Dear Journeyman Richard Muenzer, Thanks for your comment. This turbine is a prototype and is currently not working. I think it's a very good idea, but I'm stuck because I have other things to do. A small, portable turbine would be very useful. Please make a nice turbine.
I apologize for this I'm not trying to bore you to death by writing a book please read though@@mamawachibi2 good morning it's just Richard just so you know. I only throw the journeyman card when I need people to really listen. I'm sorry to hear that your turbine is down those fans are nice and work really well. And one of the better designs from a ceiling fan I would like to see a tester on it too see how many volts, watts, amps you're producing. Yes I have every intention on making them perfect. The reason really is. I'm going to put these with my homeless community here. My city council will freak out. And I can name three of them. Andrew Coolidge Kissy Reynolds & Sean Morgan Especially Sean Morgan he hates the gypsies here. He Especially does not like me. I can give you a couple of guesses why.. yeah that's right I went bankrupt in 08 and slept on the streets for a long time. I am Not sleeping on the streets now I came off December 31 but while I was on I was a good activist. About eleven years in total. I stayed in the Carpenters Union and paid my dues. I joined our ad hoc committee for the homeless (oh how, I do not like that word) went from just a regular,, to sitting on the executive Board. A elected position. Started the needle exchange here and became a co-founding member. Did a couple of protests went to jail for one. So now I'm going to build some mini electrical turbines that are safe,small,efficient and look like it just came out of the factory and the remote control airplane and helicopter motors are waterproof reliable and tested. RC electrical motors are perfect. All you really need is 25W, 5V, 3 Amps. What's really running are lights,laptop and a phone that's all electricity you really need. So I'm putting back together all my Carpenter's tools that the city council got this last time. yeah they got my camp total amount. $20,000 that's total camp not just the Carpenters tool. The tools were early 1920 yes I actually know how to work a Jack plane bench plane block I even know how to sharpen,panel & hand Saws. That includes tenan an back saws. I picked back up my electrical tester and a Waller soldering iron rechargeable have 3 planes two number 4 Jack planes and a Bailey's block plane picked up a couple of disston hand saws nextstep "spoke shaver" "The tool that really won the West."no it was not the Winchester or the Henry's rifle it was the convex spokeshaver. Those weapons had to get transported somehow... Covered Wagons four wheels with a bunch of wooden spokes. Every one of them where hand milled. Anyway I do apologize for this book I didn't mean to write one but I just thought you should know. It surprised me that you responded so quickly. I appreciate your time and response 😊😊🙂 Thank you sincerely Richard...
Thank you for giving a comment immediately I use a AC-servo motor. This motor is the best for a small wind generator. Next, I would like to make it the wind turbine assembled more easy.
Thanks for the compliment. And, thank you for praying for us. By your words, I will be happy. Please convey my best regards to your wife and children. By the way, I make it so they can be used in an emergency such as an earthquake this windmill. I will hope that earthquake does not occur anymore.
Nice job! Why don't all wind turbines have blade area similar to this? Doesn't the extra area make the turbine more efficient by capturing more of the wind energy?
Great, ver smart design!
Including nice and smart pitch changing system (axle within hollow axle). Lightweight and Easy to transport. All very light, flexible and good.👍👌
You are creative and make good designs, catching free energy. I watched your video with my children and wife and they also enjoyed it. I am happy that you are still well in Japan and I pray for you.
Good job
Great design. Love it. :-)
Hi can you help me understand the breaking system.thank you
In that wind you can make any windmill work!!!!
Good pitch changing system (tube within the tube). Easy to transport. That's very good.
+Peter Worsley
But the inner tube is too long.It's necessary to be improvement.
Thank you^^
Good afternoon my name Journeyman Richard Muenzer I'm a Carpenter. And being this is 9 years old is this wind turbine still running and are you doing any more... I thought of something similar but lots smaller. Remote control airplane motors.
Dear Journeyman Richard Muenzer,
Thanks for your comment.
This turbine is a prototype and is currently not working.
I think it's a very good idea, but I'm stuck because I have other things to do.
A small, portable turbine would be very useful.
Please make a nice turbine.
I apologize for this I'm not trying to bore you to death by writing a book please read though@@mamawachibi2 good morning it's just Richard just so you know. I only throw the journeyman card when I need people to really listen. I'm sorry to hear that your turbine is down those fans are nice and work really well. And one of the better designs from a ceiling fan I would like to see a tester on it too see how many volts, watts, amps you're producing. Yes I have every intention on making them perfect. The reason really is. I'm going to put these with my homeless community here. My city council will freak out. And I can name three of them. Andrew Coolidge Kissy Reynolds & Sean Morgan Especially Sean Morgan he hates the gypsies here. He Especially does not like me. I can give you a couple of guesses why.. yeah that's right I went bankrupt in 08 and slept on the streets for a long time. I am Not sleeping on the streets now I came off December 31 but while I was on I was a good activist. About eleven years in total. I stayed in the Carpenters Union and paid my dues. I joined our ad hoc committee for the homeless (oh how, I do not like that word) went from just a regular,, to sitting on the executive Board. A elected position.
Started the needle exchange here and became a co-founding member. Did a couple of protests went to jail for one. So now I'm going to build some mini electrical turbines that are safe,small,efficient and look like it just came out of the factory and the remote control airplane and helicopter motors are waterproof reliable and tested. RC electrical motors are perfect. All you really need is 25W, 5V, 3 Amps. What's really running are lights,laptop and a phone that's all electricity you really need. So I'm putting back together all my Carpenter's tools that the city council got this last time. yeah they got my camp total amount. $20,000 that's total camp not just the Carpenters tool. The tools were early 1920 yes I actually know how to work a Jack plane bench plane block I even know how to sharpen,panel & hand Saws. That includes tenan an back saws. I picked back up my electrical tester and a Waller soldering iron rechargeable have 3 planes two number 4 Jack planes and a Bailey's block plane picked up a couple of disston hand saws nextstep "spoke shaver" "The tool that really won the West."no it was not the Winchester or the Henry's rifle it was the convex spokeshaver. Those weapons had to get transported somehow... Covered Wagons four wheels with a bunch of wooden spokes. Every one of them where hand milled. Anyway I do apologize for this book I didn't mean to write one but I just thought you should know. It surprised me that you responded so quickly. I appreciate your time and response 😊😊🙂
Thank you sincerely
Richard...
Thank you for giving a comment immediately
I use a AC-servo motor.
This motor is the best for a small wind generator.
Next, I would like to make it the wind turbine assembled more easy.
Os andrades
Wow! Look at that thing, Nice job!
Видео "Трансформатор TESLA": ruclips.net/p/PLlEX99xZE8qNc1MNp9EwjbeugLTRhr-9g
真的很美麗....
謝謝
Thanks for the compliment.
And, thank you for praying for us.
By your words, I will be happy.
Please convey my best regards to your wife and children.
By the way, I make it so they can be used in an emergency such as an earthquake this windmill.
I will hope that earthquake does not occur anymore.
🍔
Is that a dc motor you're using? Very effective way to harness wind power.
Great job👍🏽
instead of thin plastic, there should be a hard one for best result to give the turbine a swift move.
thank you for the advice.
It would be nice if there was a way to fold a hard plastic sheet.
WOW!! just love the imagination brother.
Nice job! Why don't all wind turbines have blade area similar to this? Doesn't the extra area make the turbine more efficient by capturing more of the wind energy?
Thank you for praising brother.（＾ｕ＾）
Thank you rikkiesix. (^o~)
Thank you belgrademachine. (*^^)v
Wery god my colege👌👍
Thank you Përparim Osmani
Bacana