Don’t need to use O rings and nuts do not work on NPT National Pipe Thread nipples bud. The threads themselves are tapered and seal against the threads. That’s why everything should be brass so it seals against the soft aluminum.
You just vented the crank case right back in to the crankcase.. you can run one unchecked like to the valve cover to get oil mist to the rockers. But you need a pcv valve (to let air out of the case and not back in). On the other line and run it to a catch can. That creates a vacume in the crank case and the piston can go down a lot easier and gives you a tiny bit more power.
You may want to reconsider 90 mph unless the entire drivetrain and wheels made to go that fast I’ve had one fly apart barely missing my leg ! All this before reaching 80 I love watching the builds, and everything your doing just be super careful Any flaw at that speed …… Godspeed my friend 👍
Best minibike RUclipsr 🎉😴
OMG! A workbench! Congratulations 🎊
🤣 yeah harbor freight had a good price
@@RoyalJZ I am so happy you finally got something you really really needed
🤩
Good look. Following from Augusta ga
I got the same goal.
100mph mini bike.😅
Don’t need to use O rings and nuts do not work on NPT National Pipe Thread nipples bud. The threads themselves are tapered and seal against the threads. That’s why everything should be brass so it seals against the soft aluminum.
You just vented the crank case right back in to the crankcase.. you can run one unchecked like to the valve cover to get oil mist to the rockers. But you need a pcv valve (to let air out of the case and not back in). On the other line and run it to a catch can. That creates a vacume in the crank case and the piston can go down a lot easier and gives you a tiny bit more power.
Nice Video🔥🔥🔥
Thanks 🔥
What's the parts you used
What's done to it to achieve 90?
Cheetah clutch let me down lil homie.. the little pins came out and the disk started leaving dents in the housing..
I’m looking at the premier titan
@@RoyalJZ let me know how it turns out.... I need a alternative..
Nice info, keep on your Grind, ggz- 👾👽👍
Question.
How will the engine breathe better with running 2 lines directly back into your engine ?
Release crank case pressure and put more pressure on the rockers and air will come out
@@BenjaminLong-rr4nhrelease crankcase pressure by adding more pressure to the rockers arms ?
Is that going on the GTS frame?
Yeah
Favorite RUclipsr by far. Thx for teaching me all about minibikes, thanks to your videos my minibike works because i can finally fix it myself! :D
cant wait to see that thing bussin down the strip
Lookin ahhhh
Btw just subbed and I’m from the city as well looking to start biking frfr. You, Tommy and Volt got me inspired
Good Shit bro bro! I’m trying to learn something up in here up in here!
Bro ima do the same build on my mini chopper 💪🏿💪🏿💯🙏🏿
What parts would I need if I was tryna put a Duromax 440cc at a max speed of 90mph?
damn jz i gotta go to you to get my sidecover vented
You doing a great job.I know it’s going to be fast.
Let’s gooooooo
you guys need to get into 4 wheeling and mud boggs. more beaver there than you can shake a stick at
If i Send you a Trapp house Minis shirt would you give shout out?
Dm my Instagram
@@RoyalJZ done
Thank you JZ, I’m honored to help and be a part of. We gonna have a killer series and maybe hurt a few feelings if we’re lucky!
Make some longer video's
Bro let collab dawg,, or even talk
Yo
Can I get race
You may want to reconsider 90 mph unless the entire drivetrain and wheels made to go that fast
I’ve had one fly apart barely missing my leg ! All this before reaching 80
I love watching the builds, and everything your doing just be super careful
Any flaw at that speed ……
Godspeed my friend 👍