AM Mediumwave performance test Tecsun AN 48X with XHDATA D808 receiver

Поделиться
HTML-код
  • Опубликовано: 3 фев 2025

Комментарии • 19

  • @dutchbeef8920
    @dutchbeef8920 Год назад +1

    You’re doing it correct tuning each station, I’ve seen videos of people doing a band scan or going through their preset channels claiming it doesn’t do much. Well of course it wont. Equally a lot of people don’t realise the antenna is directional. Then there is those who aren’t aware different bands may utilise a different antenna (MW vs SW etc) so you have to be knowledgeable about your radio and how to operate this antenna

  • @KuzmaDV1972
    @KuzmaDV1972 3 года назад +1

    thank you for the review! it is a pity that you did not test the antenna on your own Tecsun PL-680 receiver :)

  • @Liofa73
    @Liofa73 5 лет назад +8

    Top tip: The antenna input for the XH-Data also works for Air band.

  • @draff1662
    @draff1662 5 лет назад +2

    Great test Gilles, I’m sold on getting one simply for MW DX.

  • @mduffy5453
    @mduffy5453 3 года назад +1

    Ok just looked it up. The coupler comes with antenna.
    Wats better to use the loop or this antenna for medium wave?
    I have same radio xh-data

  • @janofjanof3246
    @janofjanof3246 4 года назад

    Nice and informative video. Will try to get that loop. Like your radio stand, haven’t found a stand like that, thanks again

  • @amasondx_9307
    @amasondx_9307 4 года назад +1

    The coronavirus warning in the beginning there is so weird to look back on now, how times have changed!

  • @thomasniner001
    @thomasniner001 5 лет назад +2

    Put it up against the Tecsun loop. The loop is more compact and looks better displayed.

  • @patricklozito7042
    @patricklozito7042 5 лет назад

    Well done. Very informative. Thank you for you effort.

  • @BillyLapTop
    @BillyLapTop 5 лет назад +2

    I wonder if the antenna elements were spread a part by a wooden dowel or plastic rod, instead of a telescoping piece of metal, if that would favorably change the Tecsun antenna's characteristics. The metal rod could be affecting the efficiency of the loop. That is something I would check out.

    • @peterh70
      @peterh70 5 лет назад +1

      BillyLapTop If I’m correct, aluminum will decrease the inductance of the 1 turn coil a bit, if it would be noticeable.

  • @highwayman1224
    @highwayman1224 5 лет назад

    I can already tell that you are going to cost me some money.....lol. Great videos, can't wait to see the ones you do testing it on shortwave.

  • @rayerdinc2441
    @rayerdinc2441 5 лет назад +1

    Excellent video Gilles, thank you. I am going to get it and MLA30. The former for convenience as 'self' powered. Could you use a shorter length of cabe than supplied or would that affect any 'matching', please?

  • @Scotscan
    @Scotscan 5 лет назад +1

    a good test would be to try the Degen DE1103 directly connected with the jack - this radio can be 'cheated' to use the jack connection easily :)

  • @vfrfoxtrott6430
    @vfrfoxtrott6430 5 лет назад +1

    👍...

  • @garys.7846
    @garys.7846 5 лет назад +1

    Tecsuns are pretty deaf when it comes to the medium wave AM broadcast band. The Tecsun AN 48X works on the same principal as the Radio Shack model 15-1853 (click youtube video ruclips.net/video/VQy9iEiITSc/видео.html) to see it. It's not my video, but I own 3 of the Radio Shack loops, great little antennas and easy to use. The better the radio, the less difference an AM loop will make. I have a Panasonic RF-2200, no radio performs better in the AM band than that radio - no external antenna needed. I own numerous radios, including a Tecsun, none of them come close to the Panasonic as far as AM sensitivity. 73 de KQ2N

  • @mduffy5453
    @mduffy5453 3 года назад +1

    Where do I get that ferrite coupler from?

    • @cygnusrider
      @cygnusrider 2 года назад +2

      It is included with the AN-48X kit.