I bit the bullet and bought one a year ago for my 2015 900 XC. I went directly to Duraclutch as I found the secondary shaft had two sizes that year. They were very cool I had to send and swap out due to that. I love the thing but I have a gear whine that's loud and it sounds just like an old truck for the 1950's with straight cut gears. I can't believe that's from the clutch in any way.
There is only one size shaft in 15, it changed in 16, was two different secondary clutches in 15 though and would need to hear the noise to tell you, but probably not clutch.
I have a 21 XP 1000 Trails and Rocks Edition that has a lower Low gear than the base RZR, and no Hill Decent Control. Is there anything about the Trails and Rocks edition that would keep me from using the Dura Clutch and will the Dura Clutch act like the Hill Decent Control?
Hill decent engages the front diff, otherwise no difference. You can certainly use the duraclutch but you will have more engine braking than you have now,
How do you adjust the clutch pack I have roughly a thousand miles on my dura clutch and I notice about 500 MI on a long downhill descent the clutch releases and if you get back in the gas it slides the rear tires
@@Hunterworks I have a 2016 570 midsize. seeing what all is out there for a clutch setup. as I do lots of hauling. trailer pulling. slower speeds....30-40klm. also my exhaust is glowing... at the neck... ive been told a ecu upgrade can help this as its prob running lean? Thanks.. Johnny.. from Saskatchewan, Canada! Eh!
Just seeing this and I already have upgraded secondary with bikeman performance stage 3 and changed the weights out but I noticed when I went to 30 inch tires and gas on it RPMs jump up fast but don't feel like it's pulling as hard as it should. Can I just use your guys as primary clutch since I've got an upgraded secondary
I have a RZR S4 1000 that just had the primary clutch go out on it at less than 2000 miles. I do I broad range of riding from mountain trails and sand dunes to grocery store runs. Would this be a good solution to make my RZR more dependable? Any other suggestions?
Until you said sand dunes, yes this is a slower riders clutch who uses low mostly, you need another OEM primary and maybe dalton clutch kit to go in it from us
Hello, I have a friend with a 2011 Ranger with the diesel engine, not to long after he bought it he started having trouble shifting gears, after it heated up he would have to kill the engine to shift, he's had it back to the dealer numerous times only to take it back home doing the same thing, clutch replaced, several different adjustments and even a recall I understand, I saw on a message board that this setup will take care of the problem, is that something you've heard of, Thanks
Just bought a 19 ranger 900, dealer told me an aftermarket clutch would void my warranty, which I have for 5 years, but damn I hate the jerky laggy starts and that damn drive by wire initial dead spot in the pedal. Work work in thight hilly trails is all I do, this machine will never see over 40 mph. I also plan to add tracks would that suffice as enough gear reduction?
Your dealer is wrong, not the Duraclutch. Owner of the company father started Polaris, and he is retired from Polaris and has a office there. So in the event you buy one and they tell you, just give me a call then he will get a call!!! LOL
@@Hunterworks I was on your website pricing them today actually! Lol in june I'm going to do the duraclutch and tracks. The clutch I will do my self, I could do the tracks but once again they say the only way tracks wont void that warranty is to have a dealer intstall polaris prospectors.
I bit the bullet and bought one a year ago for my 2015 900 XC. I went directly to Duraclutch as I found the secondary shaft had two sizes that year. They were very cool I had to send and swap out due to that. I love the thing but I have a gear whine that's loud and it sounds just like an old truck for the 1950's with straight cut gears. I can't believe that's from the clutch in any way.
There is only one size shaft in 15, it changed in 16, was two different secondary clutches in 15 though and would need to hear the noise to tell you, but probably not clutch.
Are usually run under 40 mile an hour and usually trail riding technical rides
Thanks Todd
Please make a clutch kit for the John deere gators.
Sorry, Duraclutch only makes them for Polaris. The owner's father started Polaris and he is retired from Polaris.
Sounds like Polaris should just contract Duraclutch to build their clutches except for "race" type applications where jumping is involved?!
A trick : you can watch series on flixzone. Been using it for watching all kinds of movies during the lockdown.
@Theodore Braxton yup, been watching on Flixzone for since november myself :)
@Theodore Braxton yup, have been using Flixzone for since november myself :D
Send me the price and I’ll order ASAP
Price on what go to our website hunterworks.com and order it right now we’re leaving at lunch today
If any of these needs this clutch it is the CF Moto. Any plans on producing one for them?
We are a dealer but I know they ONLY make them for Polaris.
Dura clutch 2016 xp 900
List component and price
Not sure what you are asking, but these are on our site www.hunterworks.com/duraclutches_ and all info is there
Do you have a review video on the Mother Clutcher clutch system?
Here’s one they are Chinese junk that fail a lot and I have sell the same people bought them good stuff.
@@Hunterworks I have a 2016 General Deluxe
@@233178033 we have a whole page with all our clutching items. Get on our site take a look any questions just shoot me an email address on site too
I have a 21 XP 1000 Trails and Rocks Edition that has a lower Low gear than the base RZR, and no Hill Decent Control. Is there anything about the Trails and Rocks edition that would keep me from using the Dura Clutch and will the Dura Clutch act like the Hill Decent Control?
Hill decent engages the front diff, otherwise no difference. You can certainly use the duraclutch but you will have more engine braking than you have now,
Can you put a duraclutch on a 2017 can am commander 1000
No just polaris
Is there a way to replace the clutch packs when they burn up? I just ordered a set and wondering
Best to send it back to them for this repair
Have one for a 2020 RS1?
Sorry they do not make one for it
How do you adjust the clutch pack I have roughly a thousand miles on my dura clutch and I notice about 500 MI on a long downhill descent the clutch releases and if you get back in the gas it slides the rear tires
There is no adjustment, clean it first, still an issue most likely have to go in for service
Do they make an option for a 2016 ranger midsize? Do you ship to Canada?
Midsize what CC? And yes we do.
@@Hunterworks I have a 2016 570 midsize. seeing what all is out there for a clutch setup. as I do lots of hauling. trailer pulling. slower speeds....30-40klm.
also my exhaust is glowing... at the neck... ive been told a ecu upgrade can help this as its prob running lean?
Thanks.. Johnny.. from Saskatchewan, Canada! Eh!
@@diskotekentertainment8525 www.hunterworks.com/inc/sdetail/60984/68398 there is clutch for yours. Can't help with the ECU part
How much are the belts if they need replacement?
$142
Just seeing this and I already have upgraded secondary with bikeman performance stage 3 and changed the weights out but I noticed when I went to 30 inch tires and gas on it RPMs jump up fast but don't feel like it's pulling as hard as it should. Can I just use your guys as primary clutch since I've got an upgraded secondary
No, it has to come with secondary too except of the newer 1000 rangers
I have a RZR S4 1000 that just had the primary clutch go out on it at less than 2000 miles. I do I broad range of riding from mountain trails and sand dunes to grocery store runs. Would this be a good solution to make my RZR more dependable? Any other suggestions?
Until you said sand dunes, yes this is a slower riders clutch who uses low mostly, you need another OEM primary and maybe dalton clutch kit to go in it from us
@@Hunterworks I’ll be getting ahold of you later then. Thanks for the response
@@caleboshier3505 sounds good
Hello, I have a friend with a 2011 Ranger with the diesel engine, not to long after he bought it he started having trouble shifting gears, after it heated up he would have to kill the engine to shift, he's had it back to the dealer numerous times only to take it back home doing the same thing, clutch replaced, several different adjustments and even a recall I understand, I saw on a message board that this setup will take care of the problem, is that something you've heard of, Thanks
Yes sir that is correct
Will it work on 750 cub cadet 4 door
Sorry it won't
Where can I get one. To fit
@@anissaking4482 You can't, just don't make one. Only for Polaris
@@Hunterworks Thank you very much
Just bought a 19 ranger 900, dealer told me an aftermarket clutch would void my warranty, which I have for 5 years, but damn I hate the jerky laggy starts and that damn drive by wire initial dead spot in the pedal. Work work in thight hilly trails is all I do, this machine will never see over 40 mph. I also plan to add tracks would that suffice as enough gear reduction?
Pro tip: keep the stock clutches on the shelf to put back on for any warranty work.
Your dealer is wrong, not the Duraclutch. Owner of the company father started Polaris, and he is retired from Polaris and has a office there. So in the event you buy one and they tell you, just give me a call then he will get a call!!! LOL
@@Hunterworks I was on your website pricing them today actually! Lol in june I'm going to do the duraclutch and tracks. The clutch I will do my self, I could do the tracks but once again they say the only way tracks wont void that warranty is to have a dealer intstall polaris prospectors.
How are they ever goin to know you put tracks on it unless you're dumb enough to take it in that way in the event of a failure?
Read what I said, the clutch was my concern about the warranty. My POLARIS prospector tracks do not effect my warranty.