Sir, agar aap sikhao ge hamko clg mein to bhai sabse jyada maja aa jayga hamko as compared to daily routine. 🙏🏻🙏🏻🙏🏻 Thank you sir for explaining this program easily.
It's mean that your on time period is 25% of total time period. Let me explain it by an example- If your total time period is 10ms than 25% of 10ms is 2.5ms so in waveform 2.5ms is ON time and remain 7.5ms is OFF time. 2.5ms+7.5ms=10ms...... I hope you got your answer. Don't forget to like and subscribe.
It's impossible you have to consider some value for XTAL so if in a qué XTAL is not given usually we consider XTAL=12MHZ but if any other programs in which serial communication is needed than you have to consider XTAL=11.0589HZ I hope you are understood Like and subscribe ☺️
XTal is frequency generator of microcontroller and the speed of microcontroller is dependent on crystal frequency generator by XTal. I hope you got it! Please Like and subscribe 👍🏻
Because RET is use when you have used JUMP instructions in actual prpgram let say for call delay we use jump them to go back to existing running program need RET
Hi Mai diploma student hu, 2nd year me 8051 subject hai lekin programming kuch bhi samaz nahi ata, mai bahut koshish karta hu , mai baki subject me bahut hi aacha hu, lekin programming ne bahut pareshan kar rakha hai,,, meri kya galti hai samaz nahi ata.... Pls guide me.
Decimal to hexadecimal conservation because 8051 is 16bit processor it's not understanding the decimal values so that we have to convert decimal to hexadecimal
It's a binary to hexadecimal conversion if you don't want to take hexadecimal value you can take binary value as well If you want to learn how to convert binary to hexadecimal than see this video-ruclips.net/video/Z3lOaKTwKoQ/видео.html
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
0.44 minute I spoke 20 no. pin but it is 24 no. Pin sorry that was by mistake
Concepts hue crystal clear ...thnks
Welcome
he said in the end that thanks for watching this video. I was like a big thanks to you bro for making this. you saved us
Thanks a lot man 🙌
Wow you explained the concept amazingly 👍👍
Thanks a lot man.... don't forget to like & subscribe
It was so good..thanks a lot
Really thank you very much. Exam ke time pw hi aagaya 🙏
Welcome 🤗
amazing explanation, keep making new stuff
Sir, agar aap sikhao ge hamko clg mein to bhai sabse jyada maja aa jayga hamko as compared to daily routine. 🙏🏻🙏🏻🙏🏻 Thank you sir for explaining this program easily.
Thanks for your comment 😘😃
Badhiya!
Thank you 👍🙏
Wonderful explanation!
Thanks
Very informative video....❤❤
Well explained!
Thank you soo much, very helpful.
Welcome
Nice explanation bro👍❤️
Thanks don't forget to like & subscribe
Well done 👍
amazing content sir thank you so much
It is very help full for me
Thanks Sir
Thank u sir
Welcome
Bhaiya decimal ko hexadecimal mai kaise convert kiya??
How to generate 25 percent duty cycle?
It's mean that your on time period is 25% of total time period.
Let me explain it by an example-
If your total time period is 10ms than 25% of 10ms is 2.5ms so in waveform 2.5ms is ON time and remain 7.5ms is OFF time.
2.5ms+7.5ms=10ms......
I hope you got your answer.
Don't forget to like and subscribe.
Sir please make video on stepper motor programming
Soon
sir,what will change if no xtal in question?
It's impossible you have to consider some value for XTAL so if in a qué XTAL is not given usually we consider XTAL=12MHZ but if any other programs in which serial communication is needed than you have to consider XTAL=11.0589HZ
I hope you are understood
Like and subscribe ☺️
Hi sir on board how much crystal need to use for 50hz please
www.electronicsforu.com/electronics-projects/crystal-based-50hz-generator
Check this link
Hello, could anyone explain what XTal value is? Thank you!
XTal is frequency generator of microcontroller and the speed of microcontroller is dependent on crystal frequency generator by XTal.
I hope you got it!
Please Like and subscribe 👍🏻
@@Infiniteknowledgenikhilrathod thanks!
agar port 2.0 hoga to keya hoga
Hello! In some problems in my reader, it is using the number 255 instead 0f 65536 to subtract that number with. I want to ask why is he doing that🥺
Bcz timer0 is 8 bit.... 2^8=256
Maybe they had use timer in mode 2.
Why cristal frequency divide by 12 for microcontroller programming
Internal structure designed itself that giving signal after 12 Pulse
Can you make same video in c language and not in assembly language
Use chatgpt
Design a circuit that can generate a rectangular signal of frequency 600 Hz and 70% duty cycle
Sir please upload answer for this question sir
Let me try
ruclips.net/video/joJtkfq4o1I/видео.html
I made video regarding to your comment please check it and don't forget to subscribe
Bhai ese programs ki or vedios bna ke dalo youtube pe 🔥
Yes it is continuous check playlist of 8051
thanks
Can you upload all the topics in 8051 serially?.....You explain the concepts wonderfully. Thank You.
Check this playlist I hope it will really help you-ruclips.net/p/PLbZJcpiFILHDhk4egWQhX_t_8Y3MARR0P
Program end krne k liye
RET
END
Add krna padega na ?
Yes END is best
Thanks
I wanna ask why some of them have RET and some don't
Because RET is use when you have used JUMP instructions in actual prpgram let say for call delay we use jump them to go back to existing running program need RET
But still i understood more from this lecture as compared to college lecture
Thanks.. your comments are motivated me🙌
Sir I am really blessed to watch this lecture. Can you please suggest the name of the book from which the problem is solved
Please sir
Mazid only
for 20khz T will be 0.05 ms right???
Yes
❤️🙌
Hi Mai diploma student hu, 2nd year me 8051 subject hai lekin programming kuch bhi samaz nahi ata, mai bahut koshish karta hu , mai baki subject me bahut hi aacha hu, lekin programming ne bahut pareshan kar rakha hai,,, meri kya galti hai samaz nahi ata.... Pls guide me.
Follow this book - 8051 microcontroller by mazidi
❤
If using mode 0
🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉
Mera DC00 nahi but DC02 aa raha hai...
Sir book ki pdf hoto link bejo na
8051 microcontroller by mazidi
Why we need to divide by 12
Due to its construction
DC00 h kese aya??
Decimal to hexadecimal conservation because 8051 is 16bit processor it's not understanding the decimal values so that we have to convert decimal to hexadecimal
@@Infiniteknowledgenikhilrathod ha but mera DC02 aa raha hai
@@Hasti_vaghasiya check online on Google by decimal to hexadecimal conservation
@@Infiniteknowledgenikhilrathod usme b DC02 hi aa raha hai
Sir can you join our college for coaching please
I am very glad 🙌
8421 samaj nhi aaya
It's a binary to hexadecimal conversion if you don't want to take hexadecimal value you can take binary value as well
If you want to learn how to convert binary to hexadecimal than see this video-ruclips.net/video/Z3lOaKTwKoQ/видео.html
8086 k btao
Soon
wrong calculation
Correct it & upload video
Yess correct it and then u uploaded 😂😂 sir is right