Glad to see some vids from someone at JTS. I’m researching to see which model I should get and trying to see if reliable vs some of the other vids bashing the gun
I cracked the back of my gas puck on my M12AK. It would no longer cycle. The puck was stuck in the block because of that hairline crack. I managed to get it out. I noticed that in the rear part of the gas block housing there was a perfect spot for a rubber O-Ring. So i used a dremel to cut off the back part of the gas puck down to the first groove from the rear where the crack was. Then rounded it off and polished it. Sure the gas puck is shorter now. But the travel inside only slightly changed. Now that O-Ring acts as a bumper for the puck. I havent noticed much of a change in preformance when using different loads on different settings. I make sure to clean the gas block system more frequently. So far its been working perfectly.
Thank you. I bought a T1 last week
Thanks man really needed this video super informational most videos these day assume you know everything 😂
Glad to see some vids from someone at JTS. I’m researching to see which model I should get and trying to see if reliable vs some of the other vids bashing the gun
I cracked the back of my gas puck on my M12AK. It would no longer cycle. The puck was stuck in the block because of that hairline crack. I managed to get it out.
I noticed that in the rear part of the gas block housing there was a perfect spot for a rubber O-Ring.
So i used a dremel to cut off the back part of the gas puck down to the first groove from the rear where the crack was. Then rounded it off and polished it.
Sure the gas puck is shorter now. But the travel inside only slightly changed.
Now that O-Ring acts as a bumper for the puck.
I havent noticed much of a change in preformance when using different loads on different settings.
I make sure to clean the gas block system more frequently. So far its been working perfectly.
I can get you a replacement gas piston if it cracked. Just call up the shop and ask to speak with me.
I ran cheap low brass on gas setting 3 with no issues at all. Different brands
I've got my Mac cranked up as loud as the volume will go and your voice is just above a whisper. Louder if you please. Thank You
Who do I need to get a hold of about my gas regulator it seized up in the gun. I was able to get it out but it don't look to good anymore.
You can call the shop at 281 647-9130
We can go over any issue you are having with your firearm. Thank you for reaching out to us.
It's a must to clean it before you shoot it. There's some shit in there that hardens when heated
you need to speak louder......
External mic was not working, had to use the GoPro camera mic. Not the best choice but it's all I had at the moment for this last minute video.