im thinking of doing this for my project truck , which i am using the BOP rear end , currently with drums . I'm not exactly sure what year it is but it has 3 inch tubes 5x4.75 lug pattern and the 10 bolt diff cover with the indents . You guys make it look so easy .
Thanks for sharing the video.... one question if i may? is there a way to shim the calipers and brakes pads 'outward' as opposed to inward? that seems to be my issue..... Thanks
There is no way to shim them out. We set these up on stock axles. You will need to make certain if you are changing axles that they are exactly the same length as stock.
Any chance you have a kit that would fit a 1990 Mercury Grand Marquis? I believe my car has the 9 inch drum brakes. I looked on your site and didn't see it, but perhaps you provide parts for a different Ford that used the same standard equipment? Also, wouldn't I need to also replace the master cylinder with one of a different design?
Hello, sorry I have a 1992 4.9 L Ford F-150 6 inline pickup truck Rear Gawr 3166 LB and Total GVWR 5450 LB and I want to convert it from drum brakes to disc brakes. Could you tell me which are the ideal brake discs to use in this truck, please. Thanks.
We are working hard to get all of our kits back in stock. If you click the notify button on the kit your would like on the Website. We will send you an e-mail right when it is back in stock. Right now we are around 3 weeks
Only the A, F, and X body kits have backing plates. Please contact our support team at support@inlinetube.com and we can provide you with the correct part # for your vehicle.
dude makes it look so easy
Best price for a good kit!
im thinking of doing this for my project truck , which i am using the BOP rear end , currently with drums . I'm not exactly sure what year it is but it has 3 inch tubes 5x4.75 lug pattern and the 10 bolt diff cover with the indents . You guys make it look so easy .
What recommendation can I get for my stepside 2005 chevy silverado 400ss . I want to replace the drums with dics
Will this fit a Camaro 1967 because I bought it but I didn’t notice that it’s for 1968!!!
1967 Camaro is not a staggered shock set up like the 1968 and UP F Body. You will need to buy the DBK1012 and not the DBK1012S
Thanks for sharing the video.... one question if i may? is there a way to shim the calipers and brakes pads 'outward' as opposed to inward? that seems to be my issue..... Thanks
There is no way to shim them out. We set these up on stock axles. You will need to make certain if you are changing axles that they are exactly the same length as stock.
Any chance you have a kit that would fit a 1990 Mercury Grand Marquis? I believe my car has the 9 inch drum brakes. I looked on your site and didn't see it, but perhaps you provide parts for a different Ford that used the same standard equipment? Also, wouldn't I need to also replace the master cylinder with one of a different design?
Sorry we do not have the parts for the application that you have requested.
Got a Holden commodore vt (V body) any know a kit? Rear drums stuffed and failed warrant 😐
Can we ABS in old cars ?? Like ke70
What brake calipers do they use ?
Hello, sorry I have a 1992 4.9 L Ford F-150 6 inline pickup truck Rear Gawr 3166 LB and Total GVWR 5450 LB and I want to convert it from drum brakes to disc brakes. Could you tell me which are the ideal brake discs to use in this truck, please. Thanks.
Sorry We do not carry any brake kits that would fit that vehicle
My left caliper ebrake adjusted like you showed. The right caliper piston just goes in and out. Is my caliper defective?
Please send a picture and description to support@inlinetube.com to reach the tech department. They will be able to help you with this issue.
Do the Lug Nut Studs have to be replaced on a1969 Chevy 12 Bolt rear? I read they will be 1/4 inch too short after reassembly.
I have not run into this issue before. Sometimes It will depend on the wheel you use also.
Question, what if my car doesn’t have the E brake cable , can I still use that caliper?
yes you must set the e-brake regularly in order to keep the pads adjusted. The good news is we do have the e-brake delete kits in stock.
No you would have to use the e-brake delete kit
Apakah anda membuat untuk chevy trooper
@Inline Tube, do you make a kit for the Sterling 10.25?
Para ford viene algun kit? Soy de argentina y tengo una ford f100 1988
Where do you get new pads when they wear out
These pads can be purchased at any auto parts store. Please contact support@inlinetube.com for your application.
Sir can we convert rear drum break to disc break in my suzuki van 1982 model.and how much cost..
Sorry we do not offer a kit for the application
everything is out of stock so when do you expect to have any in stock?
We are working hard to get all of our kits back in stock. If you click the notify button on the kit your would like on the Website. We will send you an e-mail right when it is back in stock. Right now we are around 3 weeks
Do y'all make some for a 79 and 89 Chevy Caprice car's
That depends on the axle that was in your car. Our kit is built for a 10 bolt or 12 bolt axle that originally came with 9 1/2" drum brakes.
will this work on a 1981 buick riviera?
Ray, I have not sold one of these for a Riviera. What Axle do they have?
Is this process or kit can apply to mitsubishi suv and pick up?
Sorry We do not offer this for that vehicle
Please make one for the G body kit
Here is a link to the G-Body Video
ruclips.net/video/T5dOpktF3A8/видео.html
El diferencial que tengo es un dana 44 y le quiero poner un kit de freno a disco
Agradeseria tu respuesta
Is there for land rover series converter kit like this?
Unfortunately, we do not carry any kits for Land Rover.
what happens to the emergency brake?
You'll need to install a hydraulic parking brake
Make a kit for Dana 44 (Scout II)
How do you adjust the rear calipers ?
Please check Inline Tube for the how For the rear calipers.
Can make video for abs varient car
Sorry we do not sell any kits for those vehicles.
Will this fit a ford ranger
unfortunately it will not fit a ford ranger.
My kit didn't come with a dust shield how can I purchase one of these?
Only the A, F, and X body kits have backing plates. Please contact our support team at support@inlinetube.com and we can provide you with the correct part # for your vehicle.
Why not show how to remove c clip
Please Check out our G body rear disc video where we show how to do that
Seems like an easy process for F body ,and a good product ,but everything is out of stock
Kits will be back in stock within the next few weeks.
5/5⁵⁵⁵⁵05⁵