Using The Feedback Detection Feature In Mixing Station Pro
HTML-код
- Опубликовано: 5 сен 2024
- Hello, my name is Dana and I have been recording audio for 50 years. I am the owner of D & L Studio LLC located in Honaker Virginia. Audio is fun! Mixing and mastering is really quite simple once you learn the basics. After that, it can only be enhanced by gaining experience. Gaining experience comes from doing! If you would like to learn more, please visit danatucker.com.
Good tutorial. I have an XR18 mixer and using Mixing Station Pro (for Android). I've wanted to learn how to dial out feedback in wedge monitors (although I myself mainly use in ears these days) - this is what I've been looking for. Just a couple of questions: I get that the 'RTA Source' is which input channel you want to dial feedback out on and 'Target' is which output (bus, monitor, main speakers etc) that you want to dial it out on. So if I wanted to dial out feedback on my vocal mic in one wedge monitor, this is fairly easy to do using the method you describe in the video. However, what if you have several mics onstage and several wedge monitors and want to dial out feedback on them all? Is it possible to choose more than one 'RTA Source' and 'Target'? Do you simply do it multiple times from the same menu with different sources and targets selected?
Thanks. All you need to do is change the RTA source to ring out different mics going to the same bus. You would do this for each mic going to any particular bus, and if you have several mics going to different buses, then you would do this for each mic, but you would change the target, aka, bus.
@@DanaTucker1 Ok, thanks for the info. I will ty it out. Great channel btw, I have subscribed and I'll be watching many more of your videos. You explain Mixing Station and audio concepts very well.
Do you have to have the mains on when you are adjusting eq on monitor?
I can't honestly remember but if you are running stage monitors, it's not a bad idea to have everything turned on so you get get a overall sense of what is happening in the room.
I don't see Auto EQ
I have no idea why you would not see it. Sorry.
I'm having the same issue. The "Auto EQ" button is not displayed
Does x32 has this feature also ... because i am this close to use waves feedback elimination. PSE FEEDBACK
It does buy you have to do it manually, it is not automatic. You can find any feedback issues using the RTA feature in the X/M 32 mixers.
Is this the same as the re-gain feature? If I use regain, do I need to also use feedback detection?
Not really. Re-gain is used for increasing/decreasing the input gains, without affecting the channel strip processing or the sends to mix buses/IEMs.