how to make a battery powered soldering iron at home DIY chargeable HAKKO T12
HTML-код
- Опубликовано: 3 май 2018
- 配件表(Materials required)
board木板100mmX62mmX3mm*2,100mmX23mmX3mm*2,62mmX29mmX5mm,56mmX23mmX3mm。
616 Mini Temperature Control Board 616 T12控制板goo.gl/AJq8vs
T12 Solder Iron Tips T12烙铁头goo.gl/HNKNh1
T12 Soldering Handle T12手柄和支架goo.gl/koKfcU
3S Lithium Battery Protection Board 3串锂电池保护板goo.gl/rZ7xry
DC Boost Converter升压模块 goo.gl/1dcCeL
DC Voltage LED Display Meter电压显示模块goo.gl/hm3oYi
18650 lithium battery锂电池*3 goo.gl/LokwQP
switch
music1
Song: Kasger - Reflection [NCS Release]
Music provided by NoCopyrightSounds: • Kasger - Reflections |...
Artist: Kasger
music2
Elektronomia - Limitless [NCS Release] • Elektronomia - Limitle...
[Elektronomia]
? / elektronomia
? / elektronomia
? / elektronomia
? / elektronomia - Хобби
I like that he didn't use commercially available soldering irons to make this :D
This channel should get 1M SUBSCRIPTION
It is extremely rare not using a soldering iron to make a soldering iron LOL
that glowing frankenstein xD
Wow you are making amazing DIY
Really fantastic work, dude! Awesome! 😀
Thank you
有這位DIY大神在祖國,還怕台積電移至美國嗎?台灣目前DIY素質水平還要再急起直追祖國了!這頻道超喜歡看的,畫質清晰。私下我都錄起來珍藏,因為如此DIY高境界,在下是一輩子都趕不上您的,每天都要上來看學習新知識與技術,是一種人生享受呀!
我也只是在制作的过程中学习知识而已,能力有限,谢谢支持。
Very nice job. Great product
Thank you
no words to say you are awesome
Thank you for your support
Real teacher
I'm being ready to build this.
i used the soldering iron to make the soldering iron
Awesome bro
I like your work
Thank you
Me too
我也是
-台灣人
你好,台湾的兄弟
"0.2mm nichrome wire"
is the radius 0.2mm or diameter? its a lot easier if you use awg notation and your nichrome spool is labeled 10.
also what is the length of the wire?what is the targeted resistance of the coil for this?
i tried most od your diys but i never get the core to work properly or at all because of confusion about what length, radius/diameter and target resistance should be
Exhalant bro u creator bro
兄弟你可以做一个热风枪和电烙铁二合一教程 谢谢!
awesome video. one question, as far as i know that T12 iron might draws 3A++ of current, and the MT3608 only rated for 2A, wouldn't that boost module be under-spec for this build?
Yes, you can use a high-power booster board
KJDOT thank you
You are welcome
i like what you do
Thank you
Can we use this on / off switch for 12 v 5 amp dc soldering iron .....
Very nice and continued👍👏
very nice project
Thank you
Your camera quality is so nice like creative channel's camera
Thank you
must have, easy, simple, portable)))
Thank you
Good!
You can open a company because your work is really fantastic
😍😍😍😍😍😍😍😍😍😍
Thank you
Excellent
Thank you
Must I make it 12.6v charger
Давай еще радуй всех своими поделками. Хорошее у тебя хобби.
Thank you
You are the pride of china.
Why didnt you use your old soldering iron
What about ground is it posible to connect it and where? and what about other features of this t12 or those features arw only available on full t12 control board?
This doesn't need ground as it is not connected to make, but it can be connected
我建议你用oLED控制器,我是你粉丝
Thanks
Thank you
Please make a video about your all tools
If i'm useing a power supply do i still need that DC Boost Converter?
No need
Can i use mobile batterry in it
Dc booster is heating, please check inside.
HEY I REALLY LOVE WATCHING YOUR VIDEO. I ALMOST WATCHED ALL YOUR VIDEOS. I HAVE A REQUEST FOR YOU IF YOU COULD MAKE A DIY HANDEL AND STATION FOR HAKKO FM2032 MICRO PENCIL IRON TIP OR JBC C105 OR C210 TIPS.
THESE FINE SMALL SOLDERING IRON STATION ARE NOT AVAILABLE IN MY COUNTRY AND THEY ARE PRETTY EXPENSIVE TO BUY. IT WOULD BE AN AWESOME PROJECT IF YOU COULD MAKE A HANDEL AND STATION FOR EITHER HAKKO FM2032 OR JBC C105 OR JBC 210 TIP
Nice like :)
Thank you
Hey 👋🏼, hi
All project you’re using wood . It’s great
What is the name of the wood.
balsa
i like It
Thank you
SUPER!!!!
Thank you
Hi, how long do the batteries last? Thank you.
Atleast an hour
I just made it and I doesn't deliver enough heat..
I use 19v laptop psu.. what did I do wrong? I had double checked the connection..
maybe the over current protection is kicking in due to high current draw of the iron
👍👏
this is amazing, but the problem is all product is very costly. You make a simple bettery soldiering iron
If by "simple battery" you mean shorting a battery to heat up a heating element with all the control of a single switch, then nah. There are plenty of videos showcasing that already, and it's a pretty simple idea anyways that literally anyone could figure out - if you short the battery, heat is produced.
This video is on a higher level if you *do* have that kind of a budget and time - and know that you can get a real cordless iron for about $30, but want to have fun learning and want to be able to modify and customize their project WHILE MAKING A MUCH SAFER IRON, then this is the way to go. One video I've seen of shorting a battery to make a cordless iron used an extremely unsafe Li-ion cell to power it. Li-ion cells typically have discharge ratings of over 20A, and are normally used with Battery Management Systems (BMSs) or balance chargers. Everything about that design would be awful - shorting the cell would lead to thermal runaway in which the cell releases a combusting toxic gases and liquids, and the cell voltage is unprotected - so if you were to discharge it too far (about below 3V for li-ion cells) it would shorten the life of the cell or render it unusable.
Please do your research before making such a "simple bettery soldiering iron" - ignorance while shorting batteries could kill ya QUICK.
How long has a load lasted? despite starting the time count on the cell phone, you did not show the usage time.
Use about 1-2 hours continuously
KJDOT Thanks
You're welcome
@@KJDOT each battery has under optimal circustances 2Ah*4V=8Wh *3 batteries is 24Wh constant heating , so 1h -1,5h is realistic
Super video where do you buy the big cells battery
I bought it on Chinese Taobao
Mini fan
Please make video on projector
How long will the battery last with this build?
Atleast an hour
niceee
Thank you
Please send KIT for me. I'm not buy C Voltage LED Display Meter, 616 Mini Temperature Control Board
Next soldering iron with Arduino control, the T12 is too good for not using temperature control, for this even a 936 clone is too good 😊
Thank you
witch glue use in the video
Standard sillicone 706 glue
İ like
How to find nichrome wire
Available from the old hair dryer
开关不是应该从外往里装么?
我是故意在里边接的,这样开关就不会突出外壳,可以做到防误触的效果,如果在外边插进去,有可能会导致开关被其他物体挤压而错误的开启
i need nicrome wire plz
How many more soldering irons
a lot of
What type of wood do you use..
Balsa wood
KJDOT Thank you..
You're welcome
Nice
Thank you
I like that this man use not a real soldering iron to make a soldering iron xd
Thank you
No function such as sleep trigger by switch mercury & temperature sensor
super
Thank you
Y donde consigo todo eso???
There is an accessory purchase link below the video
Can I use 936 handle with this project?
no
@@KJDOT Why not may use 936 Handle?
Why in components Five core wire cable on 1:16 , but on 6:52 you cut Green, Blue and White wires, and soldering only Red and Black wires?
How 616 module use T12 thermocouple without third White wire?
I do not understand!
@@alex_al54_tk the t12 tip is very simple just need positive and ground because the thermocouple is connected in series with the heating element..
The remaining 3 wire is for vibration switch and E for earth I guest.. please correct me..
Element Ka kya full name ha
English me bataia
This a is a kid making a battery powered soldering iron.
How I wanted to be asian.
你这用的都是什么木板,我是指什么品种的木材
巴尔沙木板
How many time work ?
Use 1-2 hours continuously
Is because the protection board of the battery ? Is amazing nice ceeation
"A" for efforts. I think the protection PCB is for bigger battery. But it'll be alright if you don't short it.
U literally using a type of soldering iron
Where did you live
I live in China
are you asking a dead person where he lived......using DID instead of DO !!!! Learn some better English !!!
Nice bro
Shamsu Nambola balsa wood
Thank you
Price of this booster
about 0,4 usd mt3608
What is your phone??
xiaomi MI4
KJDOT Good, I also have xiaomi redmi note 4 pro
It's cool
Added it up and it's 60 to 70 bucks for this project.
Much much cheaper, under 40.
идея класс!
но мт3608 слишком слаба для этих целей, и очень быстро умрет, лучше использовать xl6009 или мощнее
Thank you
how to make artificial fire
Can you please show us your face.
And pls make a vape with homemade atomizer
Maybe I will try later
yeah pls.. i wanna see it too
开关这样装不太好吧。
怎么?
开关如果从外边插进去就会使开关高于外壳,有误触的几率,开关在里边安装,让开关低于外壳,可以降低误触的几率
KJDOT 明白了。
(✧◡✧)
Bhai Muje Lena H Ue Aayran Apna No Send Kro
vai sahab usko shayad hindi nehi ata.
make-shift soldering iron to solder the 18650s... my butthole puckered on your behalf... Should have a 'don't try this at home kids' warning. Too much heat on those guys and it's kablooey time. Best to use a spot welder. Even if it's a make-shift spotwelder connected to a car battery
PLEASE, just don't so this ! Buy a proper controller board for T12 soldering iron and use that feedback from temperature sensor in the tip. He has just cut those wires and it is dangerous, since you will just bring that tip to the maximum temperature that heating element can handle and you are damaging tip by doing that. Also it is a fire hazard!
This board has a temperature controller, you can easily change the temperature by using that potentiometer. It's a ok design but the wiring is a mess and surely a fire hazard.
Very nice and continued👍👏
Thank you