Loving the build, looks great so far. However cover up your glass and motor with a welding blanket because the sparks from welding and grinding will scar your glass and motor. Also, the etch primer is great. but using short strand filler fiberglass over the sanded etch primer first is best. Then using regular filler over the sanded fiberglass is better. The fiberglass will act as a waterproof barrier and make it so the regular filler won’t “lift”. Also look into getting some brushable seam sealer for the backside of the fender, and lay it along the seams you cut. You could spray rubberized undercoating after as well. Keeping that water out is vital to that bodywork and paint not failing down the road. I’m doing a widening of a CSX right now so I’m documenting as well and doing these same steps. Keep up the good work you have a new subscriber!👍🏾
Love your stuff, man. I've been following you for a while, and seeing your videos always gives motivation to go out to shop and build cool stuff. Keep up the good work. God bless.
mannnn impressive work, those welds turned out so clean. inspires me to chop up my e30 more. Really appreciate the technical detail you add to your videos rather than just content.
Definitely loving the channel man. And excited to see the end result on this build. This is definitely giving Smeedia vibes (especially with vlog formatting) except for Euro with strong BMW inclination instead of JDM with strong Subaru inclination which is awesome because I love his channel but try as I might I just prefer euros. Lol
Hi, I just discovered your channel, the rendering is stylish, I can't wait to see the rest, all the best from France 🇨🇵 and until the next video 👍👌💪😎🔥🔥🔥I subscribe to the channel 👍
Looks great, but if the louvres are open they’re going to throw crap up the sides of your car, I’m pretty sure you will have thought of it and have a solution further down the line. 👌
Привет из Казахстана, неплохо получается , было бы славно снимать именно в этом направлении , и хотелось бы узнать ,что если сделать всё тоже самое с задними крыльями?
Definitely more day-to-day videos, I thoroughly enjoy watching!
@@casey.adams_ thank you brother, I appreciate it
Hey dude, I'm a Chassis Mechanik from Germany. Very great work. Simple an absolutely good. I'm hyped for more of those 💪
Loving the build, looks great so far. However cover up your glass and motor with a welding blanket because the sparks from welding and grinding will scar your glass and motor.
Also, the etch primer is great. but using short strand filler fiberglass over the sanded etch primer first is best. Then using regular filler over the sanded fiberglass is better. The fiberglass will act as a waterproof barrier and make it so the regular filler won’t “lift”.
Also look into getting some brushable seam sealer for the backside of the fender, and lay it along the seams you cut. You could spray rubberized undercoating after as well.
Keeping that water out is vital to that bodywork and paint not failing down the road.
I’m doing a widening of a CSX right now so I’m documenting as well and doing these same steps.
Keep up the good work you have a new subscriber!👍🏾
Love your stuff, man. I've been following you for a while, and seeing your videos always gives motivation to go out to shop and build cool stuff. Keep up the good work. God bless.
@@Chase.Felger dude that’s the whole reason I make these videos!
Sick video dude. Love how the fenders came out. 🔥
Thanks brother
Men this guy is so talented!! Nice job I enjoy every single video!
@@angelrodriguezangel449 thank you!
From the u.k
Great video buddy
Keep them coming
Work of art 🎉
mannnn impressive work, those welds turned out so clean. inspires me to chop up my e30 more. Really appreciate the technical detail you add to your videos rather than just content.
@@Doomer17018 thank you!
I’ve got 2 1980 e12s that I’ve actually been planning on doing a very similar thing too. Love the work!
put a fire-resistant blanket over your engine and especially over your glass
Definitely loving the channel man. And excited to see the end result on this build. This is definitely giving Smeedia vibes (especially with vlog formatting) except for Euro with strong BMW inclination instead of JDM with strong Subaru inclination which is awesome because I love his channel but try as I might I just prefer euros. Lol
Hi, I follow you from Brazil, I really liked your content, this widebody is very good!
Hi, I just discovered your channel, the rendering is stylish, I can't wait to see the rest, all the best from France 🇨🇵 and until the next video 👍👌💪😎🔥🔥🔥I subscribe to the channel 👍
straight piped daily driver, neighbors hate him🤣🤣🤣🤣
just casually building a widebody in a day. awesome content and talent bro ;-)
@@FeZerret thank you brother ❤️
lovely job
@@swtstaboo998 thank you
Julián el niño is back! Love the videos I hope your channel goes viral soon!!!
Thank you brother, just gotta keep posting!
@@Julian_dininoHave you ever thought about using tin instead of bondo? I heard its difficult to do but I'm sure you'll get it right
this channel is great!
Love to see a really talented car youtuber!
@@tychoschutte9940 thank you brother, means the world
Start posting more regularly! Very entertaining to watch
@@egglords6857 I’m gonna try and post 2-3 times a week
Yes! I've been waiting for this video since I saw the reel on Insta.
Great video, as always
My lungs are trash from not wearing a mask, you should wear one bud. Good content by the way
This i total COOL wanna see more 👍🏻👍🏻👍🏻
which strength of the line in the welding machine you using and how much amphere with it? Love your vids keep em up!!
.30 wire, and I I think around 40 amps
@@Julian_dinino thank you for the quick answer! going to start welding my e30 soon so thx for the advice!
@ love to hear it
I'm here because I seen this build on Instagram!
@@BigThomTattoos lettttssss goooo
Looks great, but if the louvres are open they’re going to throw crap up the sides of your car, I’m pretty sure you will have thought of it and have a solution further down the line. 👌
@@dommoss4264 I’m probably gonna put some mesh in there
Great video! What engine do you have in the e28?
@@harakaclub m30b35
Bro when you do it right, people recognise! Sheet metal is the way to go!
great work, I will try to repeat
Yesss Brother
Vlog gang 🔥
@@austinhyer Roger that 🫡
+1
Nice work man, how r you planning to do the rear and will you be making video about it, im planning to do similar job and i wonder how it would look
I'd just do mesh in the openings. Vents have been played out lately
You do everything. Now you’re a body man. Stay warm.
This is legit gonna look sick incan just see it. Especially as i farted, while typing this and it STANKS. Deffo keeping up
This widebody reminds me on Mercedes 560sec widebody.
hey boss, how big is your garage?? Im looking to get one build and looking at dimension. are you happy with what you got ?
please cover up intakes and turbos when welding and grinding!
@@EandMandJ everything is getting taken apart and parts cleaned, this is just test fit
You have an r8??? Sickkk
Wyd for the rear?
What motor is in that range?
Did you buy the r8 wrecked? Or are you just fancy
Super 🎉
Isnt the range rover also a bmw?
❤❤
this thing looks pimp
🥱🥱🥱
Привет из Казахстана, неплохо получается , было бы славно снимать именно в этом направлении , и хотелось бы узнать ,что если сделать всё тоже самое с задними крыльями?