thank you. I have soent this day roasing you tubers who have made video showing cell phone and network "boosters" , but do not show how device connects to transmitter/recievers. Yuors is the first to demonstrate an actual, wireless, yet necessary, near the device connection! I will build and duplicate your design
I knew that antenna will amplify the signals but do not know the exact shape of antenna. Thanks signals are boosted at full strength. I used coaxial cat 6 cable. Outer Shield wire protects the interface from other devices in home and protects the inner signal from leakage.
*Don't waste your time building one of these.* Those coils are so big, there is no way they are for resonating on 4G network frequencies which are in the Giga Hertz. No measurements, just bend some wire and add random coils and coax. Plus no amplifier or directional antenna. This is crap!
How about building a biquad antenna similar to the one used in TV reception ? We apply the same design principle for the length of each elements of the square, which is 1/4 wave length of the frequency of interest. The other end of RG6 cable is then connected the same way which we have known worked so far. Of course, we can try other models we know for TV antenna, such as Yagi, Log Periodic, etc, with correct sizes for 4G signals.
Could you please use english name of each things. because i'm from kerala so i can't understood your language.... is it working properly??? Plz replay.....
No mention of length of the elements of the square. The following link gives that information as well as other textual notes. ruclips.net/video/WPQBMlwzUic/видео.html Unfortunately the comment section is disabled so we cannot ask or share our opinions there. I think the length of each elements of the square should be adjusted according to the band of frequency of interest. But I am not sure whether each element has to be equal to or about 1/4 of the wave length of the targeted frequency, like in the design of Biquad antenna for TV reception.
Did you find out the preffered rating?? tried with 20A but it isnt working right.... please answer me as soon as you see this, thanks, am doing this as my college project.
Its not possible reason There is no way your phone sim will use other network tower or something like that is not authenticate by your sim company. And the wire is not even connected to any network tower or the phone so how the f your phone is connecting by the wire. It doesn't not make any sense 🙃🙃 It would only work if it was directly to phone network module and still not sure if it would. It might actually work for radio if you connect one end with radio antenna
Ya... saya pertama kali lihat cara ini di video yg diupload 4 thn lalu : ruclips.net/video/WPQBMlwzUic/видео.html Ukuran panjang sisi2 nya disebutkan di situ. Tapi saya blm buat, mungkin nanti. Saya sdg coba cara lain atau model lain juga, termasuk model Biquad.
That's crazy how you only have 82 comments but you got like over a half a million subscribers wow that's a little odd by the way this antenna is fake and all you people that are doing this well you'll see when it doesn't work
thank you. I have soent this day roasing you tubers who have made video showing cell phone and network "boosters" , but do not show how device connects to transmitter/recievers. Yuors is the first to demonstrate an actual, wireless, yet necessary, near the device connection! I will build and duplicate your design
Thanks. I have created mine based on your video. Guess what. It's working!!!! My wife is very happy with this finding.
You have to be close to the antenna?
Circuit diagram drowned a paper and describe it. What is the length antenna. $/4 ?
This video is really very helpful.
Thankyou for efforts.
I knew that antenna will amplify the signals but do not know the exact shape of antenna. Thanks signals are boosted at full strength. I used coaxial cat 6 cable. Outer Shield wire protects the interface from other devices in home and protects the inner signal from leakage.
Hope you can put English captions, but thanks I got the idea. I will try to get the measurements for 2350mhz and try.
*Don't waste your time building one of these.*
Those coils are so big, there is no way they are for resonating on 4G network frequencies which are in the Giga Hertz. No measurements, just bend some wire and add random coils and coax. Plus no amplifier or directional antenna. This is crap!
Then show us yours sir
@@mozesylver7498
Why would I build a device that won't work?
If you think this is possible, build it yourself then!
How about building a biquad antenna similar to the one used in TV reception ? We apply the same design principle for the length of each elements of the square, which is 1/4 wave length of the frequency of interest. The other end of RG6 cable is then connected the same way which we have known worked so far.
Of course, we can try other models we know for TV antenna, such as Yagi, Log Periodic, etc, with correct sizes for 4G signals.
Could you please use english name of each things. because i'm from kerala so i can't understood your language.... is it working properly??? Plz replay.....
No mention of length of the elements of the square.
The following link gives that information as well as other textual notes.
ruclips.net/video/WPQBMlwzUic/видео.html
Unfortunately the comment section is disabled so we cannot ask or share our opinions there.
I think the length of each elements of the square should be adjusted according to the band of frequency of interest.
But I am not sure whether each element has to be equal to or about 1/4 of the wave length of the targeted frequency, like in the design of Biquad antenna for TV reception.
How is it possible without power or receiver
How much ampere for the terminal block connector?
Did you find out the preffered rating?? tried with 20A but it isnt working right.... please answer me as soon as you see this, thanks, am doing this as my college project.
How this things work? I dont get it how it can get the network
Is it for any type telecommunication companies? Ex: Cellcard, Metphone, Smart…
Dónde se conecta la malla del cable coaxial?
iron antenna? won't work!
I will try this in my house...
😂😂
très bon amplificateur de signal
does it work anywhere in your room or you need to go near the indoor antenna?
we must to stay near the antenna
idk if it'll work here in the ph, Last time i checked we were 2nd to last among our neighboring countries in terms of searching for 4G signal
@@Dzooong have you tried it?
Thank u for wasting my 05:37 mints of my life.. Cheers
Is it working? i really want a thing to strengthen the 4G LTE
The Ads you display in other video is an interesting film, but the video played in your site is quite different.
It's work for mobile signal I mean cellular
Yes I am using it but connect with my dish
@@abhiop7839 is it work with cmda 4G LTE
Its not possible reason
There is no way your phone sim will use other network tower or something like that is not authenticate by your sim company.
And the wire is not even connected to any network tower or the phone so how the f your phone is connecting by the wire.
It doesn't not make any sense 🙃🙃
It would only work if it was directly to phone network module and still not sure if it would.
It might actually work for radio if you connect one end with radio antenna
gooooooood 💗💗💗💗💗
Would this work in the Forest
I'm not yet test it in he forest.
Would you please add english subtitle or turn on google subtitle.
Is it work with old TV intenna cable (not contain aluminium foil)?
does not work.
Thank
i'll try and not working
Not possible
Thank's👌🙏🥀🌷🌹
Yo la hice, coloqué 1 en un 3er nivel para bajar la señal al nivel 1 y nada. No hubo mejora alguna. Ni de aluminio, ni de cobre.
Netikiu kad tai iš tikrųjų veikia.
Nyce👌
me too its not work in may house
Will it really works please say
I want to try it so
Same question? Did u try it?
It didn't work in Melbourne Aust.
thanks saisa
Anyone tried this ?
Yes working but not sure during rain
Pura mentira, no funciona eso, y menos ahi cerquita como lo pusiste, ya lo hize y lo puse bien alto y no sirve
Will not work without a amplifier!
wish you add english subtitle
Nice 👏👏👏👍
Can you pick up alien signals with this lol
Good video nice
Can u just use a omnidirectional outside connected to a flat panel inside 🤔 2 tv anteena both powered connected to each other
Good
Apakah untuk menangkap signal 4g??
Ya... saya pertama kali lihat cara ini di video yg diupload 4 thn lalu :
ruclips.net/video/WPQBMlwzUic/видео.html
Ukuran panjang sisi2 nya disebutkan di situ.
Tapi saya blm buat, mungkin nanti.
Saya sdg coba cara lain atau model lain juga, termasuk model Biquad.
not working
subtitle english please....
is this really works?
ان شاء الله خير
Hai.. from Indonesian
I from Bangladesh
Your name
How are you in Bangladesh
Telugu Telugu Telugu Telugu Telugu Telugu Telugu Telugu Telugu Telugu Telugu Telugu Telugu Telugu Telugu
May be it's better if u explain in English
I tried it not success don't try guys
Ésa verga no funciona, yo lo hice y perdí mi tiempo
Like it...
thanks you
អត់ឃើញឡើងផង😁😁
Guys, tried it. It does not work. FAKE
ruclips.net/video/i8par8sOaZk/видео.htmlfeature=shared
😂😂😂😂😂😂😂😂😂😂😂😂
That's crazy how you only have 82 comments but you got like over a half a million subscribers wow that's a little odd by the way this antenna is fake and all you people that are doing this well you'll see when it doesn't work
I have never seen so much baseless nonsense in my life.
wonderful signal booster video... thank you and have a great life...:) cheers
YOUR title is in English but you explain it in chinese why
Not Chinese, its thai
its african actually
It's thai. I know my OWN language!
You stupid it is not chinese it is japanese
@@-n-6969 never heard a language called INDIAN. Fool🤭🤭
Waste of time
Not working, false information 👎
Ghanta kuch fark ni padta
Faker
Time waste money waste
الفكره ليسة متطوره
الطريقه هاذي من الضروري جعل الهاتف يلامس اسلاك النحاس واذا ابتعد عنها بمقدار 5 سانتي فصل الشبكه
??👌🏻(language in, hindi)? and #english 👍👿
Revado
Troppo veloce