Building a Digital Round Counter for progressive reloading presses
HTML-код
- Опубликовано: 27 авг 2024
- This is how I build a digital round counter for any reloading press.
The PVC fittings are 1/2" not 3/4" as stated in the video
Some of the parts:
Blue display
www.amazon.com...
Red display
www.amazon.com...
Project box
www.amazon.com...
Proximity sensor
www.amazon.com...
Toggle SW
www.amazon.com...
Power jack
www.amazon.com...
Power supply
www.amazon.com...
Funnel
www.amazon.com...
OEMTools funnel
www.amazon.com...
Push buttons
www.amazon.com...
3.5mm stereo jack
www.amazon.com...
3.5mm Female
www.amazon.com...
Reset button
www.amazon.com...
This is the cheaters box, chose the "Metal induction 8mm" option. It may take a few weeks to get from China
www.ebay.com/i...
DO NOT BUY any of the displays that look like this one!
www.amazon.com...
This video was very helpful. I built 2 of these counters using similar components listed in the description. Nice large displays work well.
Thank you for this video. I am not good at all with electronics/wiring but I think I am going to try and tackle this and see if I can figure out the wiring from your video. Maybe I missed it in the video but is there a specific type of wire that needs to be used for the 3.5mm jacks?
Is this something you would probably sell as a kit? If so i would buy from you only cause i am late to this video and some of the parts listed i cannot find or not available.
I don't have a kit but I do have all the parts. What are you looking for, perhaps I could help you find it.
Metal induction 8mm
This might work, this is the "cheater box". I tried one similar to this that worked pretty well. www.ebay.com/itm/295941667087?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=1mhkscwrqt6&sssrc=4429486&ssuid=dRAMQTRrTm2&var=594128373448&widget_ver=artemis&media=COPY
Building this from scratch was the best result though
@@coldborecontraptions2063 yes I won't to build it from scratch as well I looked through your parts list an part not available as of know?
Ok I have the pex , pvc and funnel , now I just need to buy a Lathe 🤔 nice work , appears a bit complicated for a person who never work with a lathe..
I'm pretty sure if I had to I could build this with hand tools, drill, Dremel, and a few others.