@@mariuskunkel9565 Logisch logisch hehe. Ich weiß das würde schon ein paar mal gefragt aber was für Plastikteile hast du da verbaut und vor allem wo hast du die bestellt? Die Kombination kommt auf jeden Fall richtig gut🤙
@@arved6350 Bezogen habe ich die Teile über Race Styles, hat eine Weile gedauert bis alles da war. Geht ziemlich ins Geld und teils auch nichtmehr zu bekommen.
You can only fit a WR tank from 06-07 when looking at the 125. A tank from a wr250/300 from 2010 should be fine tho, they didn't change the frame on those as far as I know
Hello i have a couple of questions. I am from the Netherlands and i want to get my A1 license to get this bike. How much km can you drive with a piston and where can you buy one and how do you know what exact piston to get? Thanks for reply.
KingChooêt sorry for the late reply. It depends on how you drive. If you don't make too much power and take care of the bike a piston can last up to 15.000-30.000km. There are companies specialized on that topic. They take measurements to make sure you get the right piston.
@@mariuskunkel9565 ah alright i also have a wr 125 2003 and bought the tank and saddle of the 2009 but i bought the plastic and everything fits except the rearfender haha so this confirms my suspicions thanks man.
@@jappiemoto Tank and seat should be the same thing, only 06-08 fit properly. You can use the 09-13 rear side panels if you modify your airbox for them tho. Looks are worth it.
Moin, brauchst Tank, Sitzbank und Plastics ab 2006. WR/CR Tank ist immer unterschiedlich, ab 2008 passen die wiederum nichtmehr aufgrund des Rahmenupdates.
Hi Marius, Geile Maschine hast du da. Ich hab eine Frage und zwar habe ich eine SM 125 Bj.00 und finde keinen Original Krümmer mit Drossel für den TÜV. Hast du einen Tipp, wo man einen her bekommt? Im Vorraus Danke
Moin. Schau mal auf eBay unter weltweit, oder frag in der Husqvarna 125 Gruppe auf Facebook. Ansonsten mal probieren einen vernünftigen Prüfer zu finden, der da ein Auge zudrückt.
@@MattiLoimaranta mine was from a 98/99 WR. SMS Swingarms havent changed at all during the years, as far as i know. Should fit the same. Could be that you can only use the WR swingarm till 2008 because of the frame update on those that year.
Servus ich wollte mal fragen was musstest du alles ändern für die neue Verkleidung kannst mich ja mal auf insta anschreiben : http.jxstin._ und ps geiles video🤙
Zum Thema Optikumbau gibt es genügend Lesestoff in den einschlägigen Foren. Einfach mal mit beschäftigen. Grundlegend braucht man den Tank, sowie die Sitzbank ab Baujahr 2006.
Alter 😂 ich werde rausgezogen weil bei meiner sm der Kennzeichenwinkel zu steil ist und dann sehe ich sowas.
Geiles Bike hast du dir zusammengebaut💪
ARV3D danke dir, dass man so nicht durch deutsch Städte fahren kann sollte denke ich trotzdem klar sein😂
@@mariuskunkel9565 Logisch logisch hehe.
Ich weiß das würde schon ein paar mal gefragt aber was für Plastikteile hast du da verbaut und vor allem wo hast du die bestellt?
Die Kombination kommt auf jeden Fall richtig gut🤙
@@arved6350 Bezogen habe ich die Teile über Race Styles, hat eine Weile gedauert bis alles da war. Geht ziemlich ins Geld und teils auch nichtmehr zu bekommen.
how did you adapt the tank? 🤩
Where did you buu your stickerset?
Why is Wr better to buy then sm?
Why just wr? Why not sm?
Servus,
Ich wollte fragen wo du das absolut geile Dekor her hast😍.
Das Video ist dir echt krass gelungen💪
Do you know if you can fit a 2010 wr tank? I am rebuilding my wr250 2000, And that is the only tank available at the moment. Really Awesome bike btw
You can only fit a WR tank from 06-07 when looking at the 125. A tank from a wr250/300 from 2010 should be fine tho, they didn't change the frame on those as far as I know
@@mariuskunkel9565 Thank you!
Hello i have a couple of questions. I am from the Netherlands and i want to get my A1 license to get this bike. How much km can you drive with a piston and where can you buy one and how do you know what exact piston to get?
Thanks for reply.
KingChooêt sorry for the late reply. It depends on how you drive. If you don't make too much power and take care of the bike a piston can last up to 15.000-30.000km. There are companies specialized on that topic. They take measurements to make sure you get the right piston.
Welche Teile braucht man um auf die moderne Optik umzu rüsten?
Tank, Sitzbank, Tankhalterung selbst bauen.
Wich year and make plastic did you buy i’m doing this too but the 2009 till 2013 backfender doesn’t fit at all?
you need to buy the 06-08 CR Fender. Everything else won't fit, because the WR/CR Frame got updated in 2009.
@@mariuskunkel9565 ah alright i also have a wr 125 2003 and bought the tank and saddle of the 2009 but i bought the plastic and everything fits except the rearfender haha so this confirms my suspicions thanks man.
@@jappiemoto Tank and seat should be the same thing, only 06-08 fit properly. You can use the 09-13 rear side panels if you modify your airbox for them tho. Looks are worth it.
@@mariuskunkel9565 yeah thanks man 🔥🔥
@@mariuskunkel9565 one last question did you get a bigger rear shock? Yours looks to be standing a bit taller then mine, it looks better a bit higher
Where did you buy the wheels??
Will meine 2002er cr auch etwas auffrischen brauche ich nur Tank und plastics oder auch den heckrahmen von der 2006?
Mit freundlichen Grüßen marvin
Moin, brauchst Tank, Sitzbank und Plastics ab 2006. WR/CR Tank ist immer unterschiedlich, ab 2008 passen die wiederum nichtmehr aufgrund des Rahmenupdates.
i have a wr 125 from 2002 wondering if these plastics that you have on your bike will fit and where you bought them
They fit if you switch out the gas tank and seat for a 2006-2008 Model year. Plastics are from racestyles.de
@@mariuskunkel9565 thanks man
@@mariuskunkel9565 and also I can't seem to find a gas tank or a seat how did you come by those?
Hi Marius,
Geile Maschine hast du da. Ich hab eine Frage und zwar habe ich eine SM 125 Bj.00 und finde keinen Original Krümmer mit Drossel für den TÜV. Hast du einen Tipp, wo man einen her bekommt?
Im Vorraus Danke
Moin. Schau mal auf eBay unter weltweit, oder frag in der Husqvarna 125 Gruppe auf Facebook. Ansonsten mal probieren einen vernünftigen Prüfer zu finden, der da ein Auge zudrückt.
Hey Marius, mal ne frage von wo hast du das dekor? Und was für eine gesamt Verkleidung hast du genommen?
TimDeluxe _ Dekor ist von Scrub designz, Verkleidung steht im Kommentar unter deinem.
Jo danke habe es auch schon gesehen😅😂
Warum leiber die wre als die sm?
Moin
Wo hast du deine sittbank gekauft ich ich find nix und meine is eingerissen
lol hab einfach genau die Karre vor einem halben Jahr gekauft
kann nicht sein, wurde geschlachtet😅 wenn hat deine nur mein altes Dekor
How easy was it to fit the WR swingarm to the SM frame?
It basically fits p&p, you just need to sort out brakeline supports and the chain guards.
@@mariuskunkel9565 What year model was that swingarm? Do u think it would fit a 2012 sm frame aswell?
@@MattiLoimaranta mine was from a 98/99 WR. SMS Swingarms havent changed at all during the years, as far as i know. Should fit the same. Could be that you can only use the WR swingarm till 2008 because of the frame update on those that year.
@@mariuskunkel9565 Aight thanks!
Wie viel hat der Umbau gekostet
woife genug ^^
von welchem Modell hast du den Carbon Krümmerschutz genommen? Weil ich kein passenden bis jetzt für meinen hgs auf der SM gefunden habe.
Luca D der war für einen normalen CR/WR Krümmer
@@mariuskunkel9565 finde nämlich keinen für die wr
Luca D ja, sind nicht so oft welche zu bekommen, hab meinen damals aus Australien herschicken lassen.
Hi, wie heisst du auf Intsagram? hätte eine Frage bezüglich des Umbaus auf die neue Optik:)
@marius.kunkel
Hallo Marius,
hast Du eine neuere Sitzbank verbaut? Wenn ja, hat alles gut gepasst auch das Plastik Kit von 2008?
Stefan ich musste Tank und Sitzbank von einer 2012er 4t te 125 nehmen, das passt so Semigut. WRE/SM sollte perfekt passen.
Servus ich wollte mal fragen was musstest du alles ändern für die neue Verkleidung kannst mich ja mal auf insta anschreiben : http.jxstin._
und ps geiles video🤙
Zum Thema Optikumbau gibt es genügend Lesestoff in den einschlägigen Foren. Einfach mal mit beschäftigen. Grundlegend braucht man den Tank, sowie die Sitzbank ab Baujahr 2006.
und den heckrahmen?
@@saarenduro2216 nur wenn Baujahr < 2000
Where did you buy the cylinder head?
Markus Sandberg Larsen it's stock, i painted it with heat resistant paint usually used for exhausts or ovens