🙂 Hey from Ontario Canada. I bought the exact machine color and all on November 13/23. Put 4 hours on it first day pulling out an old stump and a few rocks. Nearly tipped it a few times. The controls take a bit of getting use too but I'm looking forward to getting a whole lot done with it.
Just posted a video to my RUclips channel of a 1 ton excavator clearing trees using the TMK 150 tree sheer. Crazy how powerful and efficient these things are!
Glad to see AgroTK is now installing a hyd return filter. 1808# total weight makes sense...thx for weighing and posting. Some of the QH12 now seem to have guards for the drive motors, too. Regarding the addition of weights below the back of the house, check clearance to the blade in the UP position first. You probably can't without hitting the blade. Long time owner/modifier of 3 Chinese minis here.
does your light work correctly? i picked up one of these last month. and my light only works when the starter is engaged. so i first thought my light just didnt work. but then i must have left the switch in the on position and then i went to start the machine turning the key engaging the starter and i noticed the green LED on the switch lit up, it was daytime, so i didnt notice at first but the light is lighting up. but then soon as the engine is running and the starter has stopped engaging im assuming the switch is loosing its power. because the LED is off and the light not working im thinking maybe one of the wires is crossed on the switch or at the starter. figured it be worth asking around before i go cutting into the wiring harness. not really even sure why its wired into the starter in the first place seems like it should be separate its just 1 little light.
Never seen that issue. It's a simple light and switch from the battery. May make sure the power (+) side from your light is running to the power side (always on) of your starter solenoid. If it's wired hot (not Ignition on) , they may have landed the wire on the wrong side of the solenoid. May have even installed the solenoid backwards (battery cable on wrong side).
Delivery guy unloaded it with a lift gate. Had they put it in boom pointing out it would have been very easy. Boom in, put all the weight on the far edge of the lift gate. Way to heavy for safety.
did they give you an option to get it off the truck for you? apparently i have to figure out a fork lift for when mine is delivered tomorrow. i got mine from amazon its the agt h12, looks like shipping through priority1 ro double d express???
How did your delivery go? I was discouraged from buying one because the seller said I would have to get a forklift to get it off the truck or get a heavy trailer and truck and drive to the port and pick it up. I couldn't do either option. About the weight, I think the H12 has a heavy counter weight in the back making it 2200 pounds. The QH12 doesn't have a counter weight.
That was super convenient. When I emailed a seller they said it was too heavy for a lift gate, I would have to rent a lift. But if the thing was in a box truck a forklift wouldn't be able to get it out since it would be crated. @@nbookie
@@DAS-VideosI somehow conned them into giving me lift gate, these things should absolutely not go on a lift gate it was so sketchy, I was sure it was going to fall off. My machine is excellent, it dug my sewer lateral up and today I dug up four small stumps. The h12 has a counterweight, however unlike many h12’s including the one pictured in the ad they have updated the counterweight to be contained inside the unit instead of being built into the body basically forcing you to cut the back panel if you want to put hinges on it. Unless you live in a very rural area call around to equipment rental places for a small fork lift, usually they can even deliver it for you, the one near me was willing to deliver it and have the driver wait for me since I just needed it to get it off a truck and set it down. Said they would only charge me half
🙂 Hey from Ontario Canada. I bought the exact machine color and all on November 13/23. Put 4 hours on it first day pulling out an old stump and a few rocks. Nearly tipped it a few times. The controls take a bit of getting use too but I'm looking forward to getting a whole lot done with it.
I would like to see how it digs. Nice looking machine.
Just posted a video to my RUclips channel of a 1 ton excavator clearing trees using the TMK 150 tree sheer. Crazy how powerful and efficient these things are!
Put pins from Tractor Supply for the bolt issues u mentioned!!
Glad to see AgroTK is now installing a hyd return filter. 1808# total weight makes sense...thx for weighing and posting. Some of the QH12 now seem to have guards for the drive motors, too.
Regarding the addition of weights below the back of the house, check clearance to the blade in the UP position first. You probably can't without hitting the blade.
Long time owner/modifier of 3 Chinese minis here.
Thanks, nice video. Would like to have heard it run. and no, it's lifting capacities and hydrillas digging capacities.
I think you be surprised how good it will handle that bucket my has been great it has over 600 hrs on it now
That is good to hear .
I pulled the back door off so I could finish my job and it ran really well and stayed cool.
I will be putting fans on a push pull system
I seen where the have them for 4800$ online with free shipping how much is it all paid for ? Looks like the incorporate tax and import fees?
does your light work correctly? i picked up one of these last month. and my light only works when the starter is engaged. so i first thought my light just didnt work.
but then i must have left the switch in the on position and then i went to start the machine turning the key engaging the starter and i noticed the green LED on the switch lit up, it was daytime, so i didnt notice at first but the light is lighting up.
but then soon as the engine is running and the starter has stopped engaging im assuming the switch is loosing its power. because the LED is off and the light not working
im thinking maybe one of the wires is crossed on the switch or at the starter. figured it be worth asking around before i go cutting into the wiring harness.
not really even sure why its wired into the starter in the first place seems like it should be separate its just 1 little light.
Never seen that issue.
It's a simple light and switch from the battery.
May make sure the power (+) side from your light is running to the power side (always on) of your starter solenoid. If it's wired hot (not Ignition on) , they may have landed the wire on the wrong side of the solenoid. May have even installed the solenoid backwards (battery cable on wrong side).
How much did you pay for this?
A 1T excavator usually sells $4000
How has it performed so far?
The Kubota is around 22000. I have a Hightop ht10b 1 1/2 years. I looked at the h15 .with a few modes it would be good
Did you have to unload it or did the delivery driver unload it?
Delivery guy unloaded it with a lift gate. Had they put it in boom pointing out it would have been very easy. Boom in, put all the weight on the far edge of the lift gate. Way to heavy for safety.
Thank you.
I’m in the Chicago area who was the company you purchased from?
I am an excavator manufacturer.
did they give you an option to get it off the truck for you? apparently i have to figure out a fork lift for when mine is delivered tomorrow. i got mine from amazon its the agt h12, looks like shipping through priority1 ro double d express???
They didn't give an option. It showed up with lift gate. Thats how they loaded it so it's how they unloaded it.
How did your delivery go? I was discouraged from buying one because the seller said I would have to get a forklift to get it off the truck or get a heavy trailer and truck and drive to the port and pick it up. I couldn't do either option. About the weight, I think the H12 has a heavy counter weight in the back making it 2200 pounds. The QH12 doesn't have a counter weight.
That was super convenient. When I emailed a seller they said it was too heavy for a lift gate, I would have to rent a lift. But if the thing was in a box truck a forklift wouldn't be able to get it out since it would be crated. @@nbookie
@@DAS-VideosI somehow conned them into giving me lift gate, these things should absolutely not go on a lift gate it was so sketchy, I was sure it was going to fall off. My machine is excellent, it dug my sewer lateral up and today I dug up four small stumps. The h12 has a counterweight, however unlike many h12’s including the one pictured in the ad they have updated the counterweight to be contained inside the unit instead of being built into the body basically forcing you to cut the back panel if you want to put hinges on it. Unless you live in a very rural area call around to equipment rental places for a small fork lift, usually they can even deliver it for you, the one near me was willing to deliver it and have the driver wait for me since I just needed it to get it off a truck and set it down. Said they would only charge me half
@@DAS-Videosalso the h12 is 18xx lbs, unless you weight about 400lbs it won’t be 2200lbs lol
Those sell for $4500 in Texas
Please show me where I can get a John Deere or a Kubota mini ex for 9-12k I’ll buy them all cheapest used Machines I’ve found are 18k with 3500hrs
50 mile search around Birmingham Alabama on FB classifieds shows 3. Both larger than 1ton. 250 miles, I stopped counting at 12 units. Happy hunting!!!
I can find you as many as yiu want let me know if your serious