Thanks! I've been watching that left for a few years, but I didn't want to shell out the dough for it. Then, I was just like, F it, let's make it happen. Glad I finally bit the bullet.
@@Killa_b_rc Pretty much, unless I change up the bodies or electronics in the future. I do have new wheels and tires for both. Just haven't made the time to get back out and film some runs. But, they'll pop up.
I am about to buy F450. I like these videos. I am actually going to delete the bed and put in 5th wheel on a piece of aluminum. The lights will actually be added. Big winter project!
Yessir, all the cutting, positioning and soldering is the main reason I'm taking so much time with this mod! No prob on the shout Patna, just throwing out some of (not all) the channels I stay locked in with.
Yo! Thanks! Anyone who doesn't know wiring and tackles this build on themselves will learn a lifetimes worth by the end! Since they are low voltage LEDS, ya cant mess too much up, but it's gonna be worth every minute and every dime once she's all buttoned up!
Yoooo that thing is gonna be sick when it's all done. Great vid fam appreciate the shout!!! Editing was on point. Cant wait to c the finished product 💯💪🏽✌🏽
Yo! Thanks man, The bad thing about this is to film, discuss and edit every detail would be a complete snoozefest. Angles to show all the wiring and soldering would've been pointless so I had to leave a lot of footage on the floor. Oh, but when she's done...Oooo Weee (Snoop Dogg voice).
Man! At first I was like, yeah, this’ll never come together. All those wires, and lights…smh. But as you go along, the picture starts getting clearer and clearer.
Thanks for the videos. What tool are you using to crimp the wires? That is my weak point. Also how do you attache the wires to the power board? Your videos are awesome by the way.
Great video nice soldiering job question what and where did you buy your soldiering block from I have been looking for something like that thanks and where did you get that lift that is wild
Thanks! It’s been a long time since I picked up that soldering block. But, it’s called The Jigs Up. I bought the lift from Amain Hobbies. Here’s a link: tinyurl.com/4y67pdha
You did great BUT This is sad. Someone should be making a light kit for this truck that is prefit! They can do that. They could sale it to. Just my thoughts...Great job! Like a stick on thing or something...idk
It's not for the beginner at all. I'm sure there are kits out there like what you mentioned, but the fun in this type of kit is all the detail work necessary to pull it off. But, the beginner whose never wired up anything, or cut/modified their own bodies, they should steer far as far from this as possible! I do, however think that you can send you body to 110RodShop and they may do the work for you (at a premium though).
@@rcpd3157 Agreed. I ran into another individual on the 'Tubes who did just that, so I'd imagine it's just a matter of getting in touch with 110 to hash out the details.
Looking really tight man !!!
🙏🏽👍🏽
Nice mid credit roll THANKS BROTHER !
I like to throw things like that tin from time to time with no notice!
The final reveal is guna be sick !!!
You already know!
Great video brother thanks !
Nah, thank you Brotha! You keep supporting the channel in ways you have no idea!
That looks amazing,never seen an RC car lift that good before👌👍
Thanks! I've been watching that left for a few years, but I didn't want to shell out the dough for it. Then, I was just like, F it, let's make it happen. Glad I finally bit the bullet.
You’re about to make me buy one man.
Aye...step on the gas and get one brotha! Just like that '64 from Redcat, this F450 is a must have!
@@JSinistaProductions are you done with the infraction build? Haven’t seen that or the Mojave
@@Killa_b_rc Pretty much, unless I change up the bodies or electronics in the future. I do have new wheels and tires for both. Just haven't made the time to get back out and film some runs. But, they'll pop up.
Man that sure is gonna look awesome once u get all the Lights in ur doin a good job bro, can't wait to see the finished project 💯👍
Me too Buck's, me too! Appreciate ya fam!
I am about to buy F450. I like these videos. I am actually going to delete the bed and put in 5th wheel on a piece of aluminum. The lights will actually be added. Big winter project!
Big winter project indeed! It’s gonna take you some time to get it just right!
gonna look wicked
I truly think the final result will be!!!
Like #3 🔥🔥 bruh! You definitely doing your thing on this installation series 💪🏾💯
Yeah he is!
Gotta do this one right Coach! No time for half-stepping!
Nice.. very vice. Great job my brother
Thanks Patna. Appreciate your support!
That looks sick nice job, A lot of work cutting and organizing all those wires. Thanks for the shoutout
Yessir, all the cutting, positioning and soldering is the main reason I'm taking so much time with this mod! No prob on the shout Patna, just throwing out some of (not all) the channels I stay locked in with.
Man that’s awesome 👏 work on the leds good stuff great job thumbs up 👍
Yo! Thanks! Anyone who doesn't know wiring and tackles this build on themselves will learn a lifetimes worth by the end! Since they are low voltage LEDS, ya cant mess too much up, but it's gonna be worth every minute and every dime once she's all buttoned up!
Looks so sick bro!! 🔥🔥💪💪
Thanks! Once she’s all lit up it’s gonna be dope!
Looks good. I may have to get one of these now.
If you decide to get one, you won’t be disappointed!!!
Yoooo that thing is gonna be sick when it's all done. Great vid fam appreciate the shout!!! Editing was on point. Cant wait to c the finished product 💯💪🏽✌🏽
Yo! Thanks man, The bad thing about this is to film, discuss and edit every detail would be a complete snoozefest. Angles to show all the wiring and soldering would've been pointless so I had to leave a lot of footage on the floor. Oh, but when she's done...Oooo Weee (Snoop Dogg voice).
@@JSinistaProductions I feel ya but what u did was awesome!!!! Cant wait to c the finished product 💯💪🏽✌🏽
I know how it is with those wires for lights bro good work 💪💯💥
Man! At first I was like, yeah, this’ll never come together. All those wires, and lights…smh. But as you go along, the picture starts getting clearer and clearer.
Man 🔥 video but the music right to the heart bless brother 🙏
Music take you back to cardboard boxes, File/Adidas suits and low-top suede Pumas?
@@JSinistaProductions man right
Who sells the dope 1/10th scale bendpak list? Nice work!!
Thanks for the videos. What tool are you using to crimp the wires? That is my weak point. Also how do you attache the wires to the power board? Your videos are awesome by the way.
Great video nice soldiering job question what and where did you buy your soldiering block from I have been looking for something like that thanks and where did you get that lift that is wild
Thanks! It’s been a long time since I picked up that soldering block. But, it’s called The Jigs Up. I bought the lift from Amain Hobbies.
Here’s a link: tinyurl.com/4y67pdha
How to purchase led kit??
Please give information to me
IG: @110RodShop
You did great BUT This is sad. Someone should be making a light kit for this truck that is prefit! They can do that. They could sale it to. Just my thoughts...Great job! Like a stick on thing or something...idk
It's not for the beginner at all. I'm sure there are kits out there like what you mentioned, but the fun in this type of kit is all the detail work necessary to pull it off. But, the beginner whose never wired up anything, or cut/modified their own bodies, they should steer far as far from this as possible! I do, however think that you can send you body to 110RodShop and they may do the work for you (at a premium though).
@@JSinistaProductions Having the option to send it to 110RodShop is actually pretty awesome.
@@rcpd3157 Agreed. I ran into another individual on the 'Tubes who did just that, so I'd imagine it's just a matter of getting in touch with 110 to hash out the details.
You guys install?
Is it 4 in across ? Or 4 cm across
5 1/4" across from inside tape line to inside tape line.
1/10 rod shop 1 word .. EXPENSIVE