To learn electronics in a very different and effective way, and gain access to Mr Carlson's personal designs and inventions, visit the Mr Carlson's Lab Patreon page here: www.patreon.com/MrCarlsonsLab
someday build a regen from own design... or off net. would be cool.. wu2d used one of them new flat tubes or something . but be cool see what you would come up with .
Do you have any idea while old Tek scopes with 50+ tubes can still be working but many TV with tubes had them frequently go out? Did Tek use higher quality tubes?
TVs generally are very hard on certain tubes due to circuit demands. Think HV, damper, etc, that run near design limits while ‘as the world ends’ and ‘the young and the useless’ run the raster all day long;)
I agree. This little radio is an example of technology in transition. I graduated HS in 1962. I was just getting to really understand tubes when we blown up by the humble CK722 transistor. What are holes?
It's one of those where technology is in transition. It's probably a rare survivor of its model. So, I think that it deserves to be properly restored rather than being a spares donor.
My grandfather had a radio just like that till he passed away. I remember him listening to Paul Harvey talk show each morning. I never knew what happened to the radio after he passed. You should definitely restore it.
It would be cool to see this get the official Mr. Carlson tune-up (TM)! The main interest would be to see how well such a modest radio could perform if it was given a proper full electrical restore. It might also be interesting to compare it to one of the "grand" tuners to see how deaf it is comparatively once fixed up.
I know more about tube socks than I do about tube valves but the clarity and attention to detail in your presentation makes every video a pleasure to watch.
My first 2 duty stations in the US Coast Guard were LORAN transmitter stations. The transmitters were 275KW at 100KHz pulsed signal. If I remember correctly, the output plate voltage was about 18Kv. If we did not keep jumper wires across the spare capacitors that were in stock, they could charge to near their rated voltage. Many people have been shocked by high voltage across the body, due to not verifying a shorting jumper was installed before grabbing the ceramic insulators to pick up the 20+ pound, metal encased, oil filled capacitor. The connection studs were on top of the insulators and easy to set your thumbs on. Tubes, I love seeing them glow.
The 19T8's filament has a higher resistance than the 14GT8's filament. The 19T8 will probably see about 23-24 V across the filament, and the rest of the string will run a little cooler. Need to put some shunt resistance across the filament to bring it down to 19 V. Mr. Carlson, I'm surprized, but gave ya a thumbs-up anyhow for the diode modding. 👍
A nice presentation of a receiver that combines the box design of early radio and the front face of the 1960s. It certainly belongs to the development of radio. Thank you!
I am all for restoring this radio. I have an old 8 tube Philco am/fm radio that was given to me as "It was working in our garage, then stopped so you can have it" that I want to restore, but I've never aligned FM so I've been waiting to watch you do one.
overheard in the FM section: "...Bellingham this 4th of July weekend..." Spent the afternoon of the 1st at the Spark Museum in Bellingham. I'd guess that anyone who is a fan of this channel would enjoy a visit there. Yes, please do a full rehab on this radio!
very impressive repair, your knowledge of electronics is remarkable, I think that radio needs to see a new life. keep up the great work you are doing. thanks for sharing.
Absolutely yes Paul, on the restoration of this radio. I love watching you do your magic on the older tube type radios. Thank you. Gene from Tennessee.
Mr. Carlson, i love your videos. I think your videos are best-in-class. They are much better than any other similar type videos on the internet. I recommend to restore the radio please. 😊
That's a really good point. I'd love to see an FM alignment. It may not be much of a looker, but it does have FM to be aligned. Count me in on the "Yes, restore" side just for that.
Have at it, Mr Carlson! Given it's functional and the case is in neat and tidy, it is worth preserving it for the future. Also, be great to see the tuning etc as that is something many of us will likely have a crack at during our own projects and restorations.
I would like to see the restoration and tuning. I have several Zenith AM/FM tube receivers that need repaired and/or aligned so this would be of interest to me. Thanks.
Cheater cord... that's a new entry for my dictionary 😁 Mr. Carlson is an excellent English teacher! I'm looking forward to watch a full restoration video of this unit
Nice job as usual! One funny thing to do when restoring electronics is to build in a little smoke generator that activates when pressing a certain button. You can combine that kind of mod with a hidden web camera filming the event.
A great little survivor from the end of the valve era; I'd love to see a full restoration. I can't quite believe the cost-cutting measures they used, especially on the tuning string!
I love the design of this radio. Rational layout. I happened to repair Soviet radio equipment of about the same age. I noticed the same problem of the lamp panels losing contact with the PCB. I think this is due to cyclic temperature deformations when heating the radio tubes. For radio equipment with volumetric installation of radio components, this problem is not typical.
Interesting way to see printed circuit board with tubes. I say yes to restoration. Love to watch your channel. I own a electronic repair shop in Brazil and i often make a repairs on HDMI boards of modern receivers like Denon, onkyo, etc. I love the challenge to repair this type of equipment.
Restore it Paul! It deserves to get some more use and we would like to see the FM alignment. I can’t recall you doing many FM radios. Videos of good in depth FM alignments are few on RUclips.
It might be a fairly common, low budget radio of its day but it's a good example of a hybrid AM/FM with reutilized TV valves. TV valves are generally easier to get hold of so I think it's a great set to demo to those getting into radio restoration, and who better to show the does and don'ts of radio repair? 😁👍
I have mixed feelings about fully restoring this particular radio. However, if you do, please use vintage test & alignment equipment, like a VTVM, EICO or Heathkit, i.e., the equipment most of us hobbyists might use. I'd especially like to see you use a vintage FM Sweep generator, like a Heathkit TS-4 or an EICO Model 368. Maybe you could show the procedure with and without using an oscilloscope. I know you've done this with AM alignment. Maybe you could use this radio to do a training session on different methods of FM alignment. Thanks for your videos! You were one of my main inspirations for attempting this hobby!
When I was a teen back in the mid 60's, I offered to sweep and clean and maybe even learn something electronics in a corner strip mall TV/Stereo repair shop.I started at 50 cents an hour. Even drove on service calls taking the TV tech to out in the field. I was also "trained" on the tube checker machine at the counter. Checked tubes and made more profit for the shop selling weak and blown tubes. I fixed a ton of these radios. Somewhere I still have one of these dual speaker by GE. WB5LOP
I'd love to see it restored if you have time Mr Carlson! On another note I inherited an obviously very old Mini-Ball TL60 amplifier that has one MRF 453 Transistor in it which is no longer available. I can't find any info on that amplifier model whatsoever. I'm told it doesn't sound very good on the air but I did manage to get out 7 miles on it where I couldn't with my base CB setup at 20 watt's. Originally it had very high SWR because the SO 239's were loose at the back of the chassis. It has a nice little circuit board with a mic keying circuit and a bypass switch with led on the face. Also a couple small transistors as well as a couple Mosfet transistors at the edge of the board. I changed one physically leaking cap on it but have not put it on the air again. With it being old I didn't know if you might like taking a look at it or not?
GRat video and troubleshooting again Paul congratulations for the high quality. I would like to see the radio restored to its full and even more, improved with a pulley for the string and some light for the dial, etc.
![Delco High Performance Radio Receiver! [Repair]](http://i.ytimg.com/vi/ZS3X2Bat8Dw/mqdefault.jpg)
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
To learn electronics in a very different and effective way, and gain access to Mr Carlson's personal designs and inventions, visit the Mr Carlson's Lab Patreon page here: www.patreon.com/MrCarlsonsLab
someday build a regen from own design... or off net. would be cool.. wu2d used one of them new flat tubes or something . but be cool see what you would come up with .
@@XPFTP Interesting. That would be 1 kick ass radio if Mr. C built it from the bottom up.
Do you have any idea while old Tek scopes with 50+ tubes can still be working but many TV with tubes had them frequently go out? Did Tek use higher quality tubes?
Please do the restoration. It is one of the few valve/tube radios that is not older than l am!
TVs generally are very hard on certain tubes due to circuit demands. Think HV, damper, etc, that run near design limits while ‘as the world ends’ and ‘the young and the useless’ run the raster all day long;)
This is a perfect example of 60’s design. Maybe that is why it deserves to survive. I would say yes.
I agree. This little radio is an example of technology in transition. I graduated HS in 1962. I was just getting to really understand tubes when we blown up by the humble CK722 transistor. What are holes?
*Word.*
It's one of those where technology is in transition. It's probably a rare survivor of its model.
So, I think that it deserves to be properly restored rather than being a spares donor.
I've been telling my psychiatrist the same thing about myself.
@@icanfartloud 🤣
This little unit deserves a full restoration, with maybe a full range speaker.
Your one of the best instructors on RUclips, Sir!
for sure I have Viston brand speakers that I use as a replacement when needed !
I do not think that radio deserves life. So much cost cutting b.s. So much heat into that circuit board. Yuck. But kudos to you for fooling with it.
How much would an old radio like this pull(Watts) from the wall ?
@@drupiROMThe tubes alone should pull something like 25W.
My grandfather had a radio just like that till he passed away. I remember him listening to Paul Harvey talk show each morning. I never knew what happened to the radio after he passed. You should definitely restore it.
Yes to restoration Mr Carlson! You have gone this far with this radio, so a complete restoration is my vote!
It would be cool to see this get the official Mr. Carlson tune-up (TM)! The main interest would be to see how well such a modest radio could perform if it was given a proper full electrical restore. It might also be interesting to compare it to one of the "grand" tuners to see how deaf it is comparatively once fixed up.
Yes! AND could he enhance it if it was lacking in some way. One of his little circuit boards? I am sure he could do that.
*lol* at Scott!!! I dig the *TM* - - - - good job, thanks for making me smile. :o)
You've been teaching us well. I found myself saying "replace the socket!"
Agreed. And I was yelling, "discharge those capacitors!"
I'd love to see it restored fully!
Mr. Carlson those radio's kept me gainfully employed . As a teenager .
Restore! Nice wood case to refinish.
This is the runt of the litter, so to speak, and deserves a chance to show it can still do it ;-) I say "yes" to some restoration and tuning.
Yes to restoration! Not that it’s a special radio, but an excellent teaching experience. 👍👍
Genius at work
Cute little radio. Ideal for people who want to get into restorations I imagine.
I know more about tube socks than I do about tube valves but the clarity and attention to detail in your presentation makes every video a pleasure to watch.
My first 2 duty stations in the US Coast Guard were LORAN transmitter stations. The transmitters were 275KW at 100KHz pulsed signal. If I remember correctly, the output plate voltage was about 18Kv. If we did not keep jumper wires across the spare capacitors that were in stock, they could charge to near their rated voltage. Many people have been shocked by high voltage across the body, due to not verifying a shorting jumper was installed before grabbing the ceramic insulators to pick up the 20+ pound, metal encased, oil filled capacitor. The connection studs were on top of the insulators and easy to set your thumbs on. Tubes, I love seeing them glow.
Hello in another field the mechanical electricity and especially the mains inverters the capacitors that were replaced were in short circuit
Please do a full restoration. Let herr live. It will serve as a very good project. Go for it.
Just relaxing on a Friday evening after a long day, and along comes a video from Mr. Carlson, making it way more awesome.
Great repair!!! Make a restore. 👍👍
Yes, please restore. It would be awesome if you could add a dial lamp and pulleys on the tuner string.
I say "Yes" to a full restoration!
Yes, full restoration with dial lights and magic eye added. Great channel, tanks for all videos.
Yes to restoration! I always love watching your improvements on these old radios! Worth a new lease on life for sure!
The 19T8's filament has a higher resistance than the 14GT8's filament. The 19T8 will probably see about 23-24 V across the filament, and the rest of the string will run a little cooler. Need to put some shunt resistance across the filament to bring it down to 19 V. Mr. Carlson, I'm surprized, but gave ya a thumbs-up anyhow for the diode modding. 👍
I've seen several FM alignment videos on RUclips. Your expertise would definitely add value to the mix. YES!
Nice to take a trip into the world of early circuit boards with tubes. Restore!
I don't normally watch your videos to the end, but I was transfixed. So yes please do a full restoration.
if doing a resto means more Mr Carlson videos then i vote yes 😁
A nice presentation of a receiver that combines the box design of early radio and the front face of the 1960s. It certainly belongs to the development of radio. Thank you!
An excellent Shango style resurrection, Mr Carlson. Yes, please go for a restoration, it deserves it.
I am all for restoring this radio. I have an old 8 tube Philco am/fm radio that was given to me as "It was working in our garage, then stopped so you can have it" that I want to restore, but I've never aligned FM so I've been waiting to watch you do one.
I say yes to the restoration to see the FM alignment process.
YES to the restoration. You're brilliant man! Genius!
Absolutely YES! But after you finish the The Grand Radio Receiver Restoration Series!!
Yes. I'd like to see a full restoration on this classic. Thanks!
YES, MR, CARLSON. I VOTE FOR A FULL RESTORATION. WARM REGARDS, DREW
Please turn Caps Lock off before you comment.
yes! entire restoration. she deserve it!
Thumbs up for restoration
Yes a resto would be great i love your channel let us know what other hobbies you have seems like your always working again thank you from mich
overheard in the FM section: "...Bellingham this 4th of July weekend..." Spent the afternoon of the 1st at the Spark Museum in Bellingham. I'd guess that anyone who is a fan of this channel would enjoy a visit there. Yes, please do a full rehab on this radio!
I apreciate especially what you do to repaire old tube tuners
Nice 👍, yes to the restoration.
A definate YES from me Mr carlson !
Great video 👍
Would like to see the tuning process, so yes to the restore.
Get it going brother can't wait to hear it
Bring this one back to life - It really deserves a restore and a life once again - great episode as always.
Two problems can’t hide from the Carlsonator
Love the 60s stuff. Yes for sure
Love these Videos! Makes you wonder who is listening to all those AM stations during the day..
very impressive repair, your knowledge of electronics is remarkable, I think that radio needs to see a new life. keep up the great work you are doing. thanks for sharing.
Yay to restoration - thanks for video
I like that it looks like its in very good shape beneath the dust. Would love to see it restored.
I have to say this is an interesting little radio. I am not a fan of the design to be honest, but everything deserves the chance to survive :)
I agree, it should be given a renewal of it's life.
Restore it! Cool little radio.
Continue on with it, would become an ideal work-lab receiver.
Brilliant sleuthing...your knowledge and skill never cease to amaze me.
Absolutely yes Paul, on the restoration of this radio. I love watching you do your magic on the older tube type radios. Thank you. Gene from Tennessee.
Work your magic on it Mr Carlson
Mr. Carlson, i love your videos. I think your videos are best-in-class. They are much better than any other similar type videos on the internet. I recommend to restore the radio please. 😊
It would be amazing to see it restored. Especially to see FM alignment. We've seen AM alignment so many times in comparison.
I agree.
That's a really good point. I'd love to see an FM alignment. It may not be much of a looker, but it does have FM to be aligned.
Count me in on the "Yes, restore" side just for that.
Have at it, Mr Carlson! Given it's functional and the case is in neat and tidy, it is worth preserving it for the future. Also, be great to see the tuning etc as that is something many of us will likely have a crack at during our own projects and restorations.
MrCarlsonsLab and CuriousMarc, feeding my hoarding and repair of vintage HP test kit
Oh wow, my parents had one of these when I was a kid. My dad would listen to the news every morning as we were eating breakfast.
I think this would be an excellent little radio to dive into. I’d say yes. Restoration and a Mr. Carlson alignment is in order.
I would like to see the restoration and tuning. I have several Zenith AM/FM tube receivers that need repaired and/or aligned so this would be of interest to me. Thanks.
Despite the dust, it held up well. Very neat. I like Westinghouse products.
I'd say yes to the complete restoration.
Nice workaround with 19V tube with diodes! Yes, would love to to it restored. Thanks for all the great RUclips videos, much appreciated.
Everything Mr. Carlson touches will work like new. Do a full recap, id love to hear the results.🇺🇸
Great video my master always a wondering on me sir thanks a lot Mr Carlson sir.
😊❤
Awesome as Always.... I would love to see this brought back to Service... Pleasure to watch and Learn
Cheater cord... that's a new entry for my dictionary 😁 Mr. Carlson is an excellent English teacher!
I'm looking forward to watch a full restoration video of this unit
That is a fun little project and learning to get it going. I would be a Yes for restore. - New Shop radio.
Nice job as usual! One funny thing to do when restoring electronics is to build in a little smoke generator that activates when pressing a certain button. You can combine that kind of mod with a hidden web camera filming the event.
A great little survivor from the end of the valve era; I'd love to see a full restoration. I can't quite believe the cost-cutting measures they used, especially on the tuning string!
I love the design of this radio. Rational layout.
I happened to repair Soviet radio equipment of about the same age. I noticed the same problem of the lamp panels losing contact with the PCB. I think this is due to cyclic temperature deformations when heating the radio tubes. For radio equipment with volumetric installation of radio components, this problem is not typical.
I'm a tube guy, so 1 more vote for a restoration!
3:45 that's high fidelity audio dust! Very crucial.
i always appreciate the commentary the goes along the actual troubleshooting and fixing
The fact that the inside looks like its a different model that is upgraded by the wood cabinet is interesting! and yes this radio deserves to live!!
Interesting way to see printed circuit board with tubes. I say yes to restoration. Love to watch your channel. I own a electronic repair shop in Brazil and i often make a repairs on HDMI boards of modern receivers like Denon, onkyo, etc. I love the challenge to repair this type of equipment.
Restore it Paul! It deserves to get some more use and we would like to see the FM alignment. I can’t recall you doing many FM radios. Videos of good in depth FM alignments are few on RUclips.
It might be a fairly common, low budget radio of its day but it's a good example of a hybrid AM/FM with reutilized TV valves. TV valves are generally easier to get hold of so I think it's a great set to demo to those getting into radio restoration, and who better to show the does and don'ts of radio repair? 😁👍
It deserves a restoration, after all it's TUBES, it must survive!
I love the wood case for radios and it is interesting that it has FM. So yes on restoring this radio.
Hello superb restoration when to the complete retauration for you to see it takes time!
It's a BIG YES from me.👍
I have mixed feelings about fully restoring this particular radio. However, if you do, please use vintage test & alignment equipment, like a VTVM, EICO or Heathkit, i.e., the equipment most of us hobbyists might use. I'd especially like to see you use a vintage FM Sweep generator, like a Heathkit TS-4 or an EICO Model 368. Maybe you could show the procedure with and without using an oscilloscope. I know you've done this with AM alignment. Maybe you could use this radio to do a training session on different methods of FM alignment. Thanks for your videos! You were one of my main inspirations for attempting this hobby!
Yes, a restoration video would be great! Thanks!
When I was a teen back in the mid 60's, I offered to sweep and clean and maybe even learn something electronics in a corner strip mall TV/Stereo repair shop.I started at 50 cents an hour. Even drove on service calls taking the TV tech to out in the field. I was also "trained" on the tube checker machine at the counter. Checked tubes and made more profit for the shop selling weak and blown tubes. I fixed a ton of these radios. Somewhere I still have one of these dual speaker by GE. WB5LOP
Hi Mr. Carlson!!🤩😃🔉🎛🎚🎙🔊📻🎧🎤📡
I'd love to see it restored if you have time Mr Carlson!
On another note I inherited an obviously very old Mini-Ball TL60 amplifier that has one MRF 453 Transistor in it which is no longer available. I can't find any info on that amplifier model whatsoever.
I'm told it doesn't sound very good on the air but I did manage to get out 7 miles on it where I couldn't with my base CB setup at 20 watt's. Originally it had very high SWR because the SO 239's were loose at the back of the chassis.
It has a nice little circuit board with a mic keying circuit and a bypass switch with led on the face. Also a couple small transistors as well as a couple Mosfet transistors at the edge of the board.
I changed one physically leaking cap on it but have not put it on the air again.
With it being old I didn't know if you might like taking a look at it or not?
I'd love to see a restauration of this little radio !
Yes please restore that old GE. Its AM capability was outstanding
Powerful and smart thinking. You are the bestest.
An opportunity for a Mr. Carlson restoration? Yes, please.
YES! Full restoration!
GRat video and troubleshooting again Paul congratulations for the high quality. I would like to see the radio restored to its full and even more, improved with a pulley for the string and some light for the dial, etc.
Love to see a full restoration of that radio.
Mr Carlsons lab your Barn find Am FM tube receiver from 1960s is awesome my friend 🎉🎉😅😅😊
Yes! Restore it please ❤