Love the “Frankenstein” gas tank, it just says “yeah I work but I work HARD!” Well she’s still in the fight, nice cleanup, thanks for taking us along… 👍🏼👍🏼
Very nice! A gas powered restoration! That was fun! I've always kind of wanted to do that.... but I am always waaaay too interested in just getting it running, and then using it....
pro tip: dont use a ziptie to fix the crack in the tank, just melt the plastic around the tank itself with the soldering iron. fuel tanks are usualy made of HDPE or polypropylene and zipties are made of nylon, these plastics dont fuse together well and you will end up with new cracks or even having the nylon straight up peel off the tank
I love Shindaiwa. Sad to see them bought out. The bolt on the side of the head needs to be taken out once in a while to pack grease in there. This keeps the head from burning out. Of course many of the new ones have no bolt so they cannot be lubricated.
grouse work mate i love the restoration work from start to finish and yep that,s a qaulity tool for sure and yep almost as good as the Echo tools for sure and cheers from Australia 🐨🐑🦘🌴🌏🇦🇺 or the land down under and i do believe Makita tools are just as good too from memory and yes some of the locals also use these for sure.
Japonês é ninja no que faz, olha essa regulagem, ele deu uma pegada só que pegou na hora, já uma reforma dessa completa vale quase o preço de uma nova.
My heart sunk. You have done all that work but you have used same old parts. You have changed gaskets on carb but not cleaned it, should have atleast run it through the ultrasonic cleaner and the ports.
And that, folks is why you don't repair and old eater like this. Labor $400, Materials $40, Parts - can't find them so project fails. VS cost of a new (cheaper quality than the old one) unit - $439.
Love the “Frankenstein” gas tank, it just says “yeah I work but I work HARD!”
Well she’s still in the fight, nice cleanup, thanks for taking us along… 👍🏼👍🏼
Very nice!
A gas powered restoration! That was fun!
I've always kind of wanted to do that.... but I am always waaaay too interested in just getting it running, and then using it....
Svaka čast majstore na demonstracii Trimera
Very nice work as hard worker🎉
pro tip: dont use a ziptie to fix the crack in the tank, just melt the plastic around the tank itself with the soldering iron. fuel tanks are usualy made of HDPE or polypropylene and zipties are made of nylon, these plastics dont fuse together well and you will end up with new cracks or even having the nylon straight up peel off the tank
Plus this white zip tie is less durable against the sun (or UV) than the black type.
I don’t even understand why he didn’t bought a new one in the first place, it’s not that expensive, and you can find a new fuel tank easily 😂😂😬
better yet don't do hot work on a gas tank!
no cheap plastic tank is worth being blown up over
@@HalFastIndustries that is why he put water in the tank didn't you see when he emptied it after
Beautiful restoration mister good job well done
Лучший, спасибо за потраченное время!!!
Muy buen trabajo 👌👍 desde argentina te felicito
thank you teacher❤❤❤
Great job, thank you brother. You are so talented
My friend, you work hard, energetic and experienced like me
Great work sir you are awesome ❤️ 😊
2034
I love Shindaiwa. Sad to see them bought out. The bolt on the side of the head needs to be taken out once in a while to pack grease in there. This keeps the head from burning out. Of course many of the new ones have no bolt so they cannot be lubricated.
Thank you,good work you are talented.
Very Nice🤩🤩🤩🤩🤩🤩
Oh my god this is too much it,s heavenly machine
😁🤩
Details matter, funtastic job😀
YOU are very Professiofenal, Thanks for teaching.
bonsoir merci pour la video c'est tres interessant merci a bientot
Nice work dude 😃😃
Super professional!!!
Hello dear friend thank you for showing me your enginunity 😅😊
😊
Nice job.
คนไทยจ้า ชอบดูมาก็เลย
Saudações do Brasil. 👍🏻
De qual cidade meu nobre?
@@cristianfs29 Aracaju-SE. 😎
Vai Brasil!
Phenomenal video!!!!
Μπράβο για την μεγάλη υπομονή σου
Wunderbarer Handwerker, sehr schön!
very good job!!
Cảm ơn bạn, videos rất tuyệt vời , tôi đã hiểu máy cắt cỏ cần thiết được bảo trì ❤❤😂
Perfect 👍 🎉🎉🎉❤❤❤
grouse work mate i love the restoration work from start to finish and yep that,s a qaulity tool for sure and yep almost as good as the Echo tools for sure and cheers from Australia 🐨🐑🦘🌴🌏🇦🇺 or the land down under and i do believe Makita tools are just as good too from memory and yes some of the locals also use these for sure.
Perfect skill 👍
Savršen rad ,čestitke!
Tebrik ederim... Çok güzel bir çalışma..
ELIAS PETERI ANUY LIIKOTILA ❤❤❤❤❤❤❤😊
Excelente trabalho
Excelentre trabajo estube entretenido viendo y aprendiendo. Saludos desde España
very good video
Thanks for the visit
Máy này ko phải đổ nhớt để bôi trơn động cơ ak ?
Máy 2 thì nên đã pha nhớt pha với xăg rồi
nhớt bôi trơn mà bác @@chitaole8331
ELIAS PETERI ANUY LIIKOTILA ❤❤❤
Un trabajo espectacular. Muchas gracias por compartir, un saludo.
Почему до людей не доходит, что если просто помыть поршень - это не ремонт двигателя!
it was great. Do you repair Makita model ls711d miter saw?
Muy buen trabajo excelente🇲🇽
Japonês é ninja no que faz, olha essa regulagem, ele deu uma pegada só que pegou na hora, já uma reforma dessa completa vale quase o preço de uma nova.
Hi sir
Can i use motorcycle starter motor to make cordless angle grinder with 18or20volt battery?
Please help..
what is this red stuff 17:25
Hello, this is a special thread lock that prevents the screws from unscrewing spontaneously
Very nice work G.S... What was the red liquid that you were using on the engine assembly? Again, very nice work...
I believe it was oil for servo pumps. Atf.
What was the mark on the gas tank for?
Whats the name of "cook stove" that heated nuts/bolts?
How do you remember what order it all goes back in?
Muy buen trabajo sólo faltó cambiar el tanque de la gasolina
Why do you pull these engines completely apart when they don’t necessarily need it !
There are a few reasons, first is curiosity, second is cleaning, third is replacing some parts.
Everything about that trimmer is built like my Echo equipment.
Yes, you're right
Jolie travail
Great !
mantep bos
Cool
que es ese QUÍMICO que uso para limpiar el PISTÓN?
My heart sunk.
You have done all that work but you have used same old parts.
You have changed gaskets on carb but not cleaned it, should have atleast run it through the ultrasonic cleaner and the ports.
surprised he didnt take the engine off an stick a electric motor on it with a cinderblock sized battery hanging off the side
You dont need a battery that big. Gas motors are < 30 % efficient, electrics are > 85 %
But yes, wish it was a conversion
No doubt
Drujba la tăiat. Pomi. Sport
11111
Bro plz make still fs120 tuning video
Tokoroko ñato, tokoroko ñato 😊
I want see him restore a washing machine
В начале забыл налить бензин, вот она и не работала. 😉
And that, folks is why you don't repair and old eater like this.
Labor $400, Materials $40, Parts - can't find them so project fails. VS cost of a new (cheaper quality than the old one) unit - $439.
Reupload ??
kak znaysh zakalnoy temperatura.
Que facil parece hasta que te pones y te sobran piezas por todos laos
Disculpe de qe país eres pa contactarte👍
Hello friends
😊
I did the same thing but still he won't start
16:19 가열금지ㅋ 부탄가스 우리나라꺼네 ㅋㅋ 여기서보니깐 신기하넹~~
Need to paint some parts
Постановка! Стяжные болты поле лерки с натянутым металлом
next a motorcycle
Это не реставрация разобрал помыл и собрал
Та он даже сальники коленчатого вала нихрена не поменял
Boa tarde amigo, poderia me dizer a medida do anel oring, do rompedor Makita 0810, por favor
Pistão e o batedor
Foarte frumos
Is it a lawn mower
It is brushcutter
0,3 mm spark plug gap !!!!!!!!!
Aun sigue habiendo partes sucias
Nedal tam gufera...🙈
Ok mantaf
👍💯
😮 its no oil
Mr gear.
Я надеялся под аккумулятор переделает!
bro!!
👍👍😎🍺🍩🛠️🗜️
❤
, 👍👍👍👍👍👍👍👍👍
刈払機ってヤツだよ
やまびこ社(新ダイワブランド)のマシンですね。
👍👍👍👍👍👍👍👍💖💖💖💖💖💖💖💖
❤❤👍👍
Marcondes Leite da Silva Pe
Felicitări
Soy d mexicano o d estado d mexico
❤❤❤❤❤👍
clearn