EASY DIY: 2006-2011 Mercedes B200 Turbo W245 alternator Replacement

Поделиться
HTML-код
  • Опубликовано: 12 дек 2024

Комментарии • 32

  • @Hossomat
    @Hossomat Месяц назад +1

    Very good video. Thanks!
    For removal of the ac-compressor bolts a normal socket and ratchet are too big to fit. I had to buy an E12 with a flexible socket attached to the handle. Worked nicely.
    For loosening the belt I used a short 15mm wrench and an extra hydraulic lift for the necessary pressure, otherwise there’s not enough leverage.
    The whole job is a major PITA. So this video helps a lot!

    • @jaythemechanic4950
      @jaythemechanic4950  Месяц назад

      @@Hossomat thank you for sharing your experience with doing this job. I’m glad it helped you.

  • @Karen-wt8vl
    @Karen-wt8vl 3 года назад +1

    Thank you for taking the time to make this video. I appreciate that you included the socket type and size and tips that you used to make the job easier. It will be very helpful when I replace my alternator on my B200.

    • @jaythemechanic4950
      @jaythemechanic4950  3 года назад

      Thank you for watching. Hope you gave the video a " Like"

  • @growingnest8091
    @growingnest8091 5 лет назад +7

    Very informative, detailed, and professional video!

  • @hiiamyu
    @hiiamyu Год назад +1

    I noticed in the video you cut off when you were going to take the top bolt on the alternator. How did you get that top bolt off? I am having trouble taking that one off.

  • @hiiamyu
    @hiiamyu Год назад

    Thank you for the video. Would you happen to have the torque specs for the bolts and nuts? Thank you!

  • @AIforBusinessSuccess
    @AIforBusinessSuccess 2 года назад

    Thanks brother amazing video. Saved me alot of time

  • @ellzofoz
    @ellzofoz 3 года назад

    Can the belt be tightened without the spanner you used in the video? Thank you

  • @Илко13
    @Илко13 4 месяца назад

    In diesel b 180 cdi is the same? 2007

  • @impilolifecommunitycenter3453
    @impilolifecommunitycenter3453 Месяц назад

    how much is to replace it

  • @stephanesabourin4724
    @stephanesabourin4724 2 года назад

    How did you remove the top bolt

  • @ellzofoz
    @ellzofoz 3 года назад

    Can the bent be tightened without the spanner you use?

  • @СашаизГермании
    @СашаизГермании 10 месяцев назад

    Thanks a lot!

  • @adtynkr
    @adtynkr 4 года назад

    Due to the location of the alternator, is it unsafe to drive in the rain and snow? Can water getting on it cause it to burn out?

    • @jaythemechanic4950
      @jaythemechanic4950  4 года назад

      Hi, thank you for your question. I personally don't think its unsafe to drive thru rain or snow... this car was already 9 years old or so. But, the location is horrible and with dirt and water/ salt it can prematurely damage the alternator if the plastic shield is not in place.

  • @alpina7047
    @alpina7047 4 года назад

    Thanks for video..

  • @ranausman9762
    @ranausman9762 10 месяцев назад +1

    I have got b180 w245 diesel automatic 2010 model. I have paid £320 for an alternator work
    Such a strange design car😢

    • @jaythemechanic4950
      @jaythemechanic4950  9 месяцев назад

      Yes. Unfortunately, European car engineers like to make things as complicated as possible.

  • @Irfan-sz1uq
    @Irfan-sz1uq 4 года назад

    Tq

  • @appelsinnadurai
    @appelsinnadurai 3 года назад

    Best

  • @김대헌-b7r
    @김대헌-b7r 4 года назад

    hard

  • @HeadshooterGTAS
    @HeadshooterGTAS Год назад

    This vehicle looks a horror to repair, i initially wanted to look for this model or w169 but the conception is shit. Repair then gets more expensive.

  • @dominicsmith181
    @dominicsmith181 Год назад

    If you haven’t got a 15 m big big spanner don’t bother,tw#t of a job👍