I tried to post a picture of my results, but for some reason I can’t. Bottom line was at 60-100% power, I could get dark markings at 2-10 mm/sec respectively
Friend, I have a 10w xtool d1 pro machine, and I bought the omtech spray, and it doesn't record, I set the parameters to 100 power and 1 speed, but I just add tap water and it falls, everything is easy to remove, What do you recommend me? I made it on a plate for my pet, it is stainless steel
That is quite weird. A couple things...make sure you shake the can well. Also are you using xcs or lightburn? My settings for stainless are 70% power 17mm/s. Try a test on some scrap...also make sure it is stainless steel because aluminum will not work as it doesn't get hot enough
@everyoneshobby It doesn't work friend, it washes and disappears, if you like, send me your email so I can send you the link to the video like I did and nope I put power 100 and speed 1 mms and nothing
Got to be the worst attempt at painting I have ever seen LOL. But seriously, get a couple cans of cheap Walmart paint $2 can and practice with that on cardboard etc... you used 4X what you should have . That shit is expensive !!!!
Thanks for advice but I was still getting used to the spray of the can. If you've used it you'd know it doesn't spray like paint. Thanks for watching though
by any chance do you know if this spray works on glass? i get a nice solid image from the "Cer..." product.
Not sure i would have to test it out. I will let you know.
Have you tried marking aluminum with CerMark, omtech or cold galvanizing compound using the xTool 2 watt Infrared diode laser yet?
Yeah I have it down stick very well. Has to get really hot to make the mark
This is bare aluminum with the xTool F1 2 W infrared laser, and three coats of omtech that I just ran
@@everyoneshobby this is 2watt IR xtool Infrared with omtech spray I just did
Yeah I do not have an infrared module to try. I want to get one someday.
I tried to post a picture of my results, but for some reason I can’t. Bottom line was at 60-100% power, I could get dark markings at 2-10 mm/sec respectively
Friend, I have a 10w xtool d1 pro machine, and I bought the omtech spray, and it doesn't record, I set the parameters to 100 power and 1 speed, but I just add tap water and it falls, everything is easy to remove, What do you recommend me?
I made it on a plate for my pet, it is stainless steel
That is quite weird. A couple things...make sure you shake the can well. Also are you using xcs or lightburn? My settings for stainless are 70% power 17mm/s. Try a test on some scrap...also make sure it is stainless steel because aluminum will not work as it doesn't get hot enough
@@everyoneshobby XCS
Try the settings above and see but also do test patterns to find good settings. Best I can think of
@@everyoneshobby thanks leader, i try and i write later
@everyoneshobby It doesn't work friend, it washes and disappears, if you like, send me your email so I can send you the link to the video like I did and nope I put power 100 and speed 1 mms and nothing
Got to be the worst attempt at painting I have ever seen LOL.
But seriously, get a couple cans of cheap Walmart paint $2 can and practice with that on cardboard etc... you used 4X what you should have .
That shit is expensive !!!!
Thanks for advice but I was still getting used to the spray of the can. If you've used it you'd know it doesn't spray like paint. Thanks for watching though