I did all that, my question is, can the child circuit be saved and attached to the parent device so, everytime I open a new session and I pickup my part I won't need to build the child circuit from scratch?
Sir, I want to simulate a circuit and I found out that there is no simulator model for the NDT2955(P-CH MOSFET) and the NDT3055(N-CH MOSFET), do you have any Idea on how to create a simulator model for these mosfets???
How to make a library and .LIB and .IDX file extension for Proteus such that when I added them into library folder i can use them in any proteus software??
I have an audio connector with a switch, since the model is not simulable, the switch simply does not work and what a pain to have to be getting into the internal model that I did to deactivate / activate it, any suggestions?
how can i save the components inside my IC in the library? could you please give some basic stepts to do so? i spent hours trying to find the way but i couldnt
+Josue Go you can start the library manager the last item in the Library menu between debug and template a dialog box will open there is a button called create library you click it to create a new custom library then it will create two files for you the .LIB and .IDX files those are useful for backup your library in the source column you will find the newly created library
If I have to manually make a model then what's the use of downloading the model? I don't understand. Every component from componentsearchengine.com is blank inside?
Good question JAMES, Isis proteus doesn't provide 100% of all the components that we need somtime you look for one in the library and you dont find it or you find one with different specification than you required then you have two ways you create a circuit logic that repace the needed component or for reusability you create a component with footprints at least or if you have specifications the you can create simulation model as I did
Thanks for your reply. Attach hierarchy module is already checked, and simulation is there but not working as in tutorial, the capacitor voltage raise to value and stop, with no more increment and no action happen inside the module.
Its wierd which isis proteus version are you using because I have a doubt about the SPICE simulator which is used by proteus to simulate ciruits try to use the same version as me proteus 7.8 SP2
Tell me please, dear friend, why almost everytime when I see a video created someone from India it sounds awful? Is it a big problem in India to find a good microphone or a good headset to record the voice properly? You definitely could have many more views if it sounds nice rather than this one with a lot of distortions and overloads.
You have reason Andrik Justme and appologize for the sound quality, yes in deed it's not easy to find a good quality microphone, the good ones are so expensive and need good investment but I'm not from india I'm from Tunisia : )
hello my doubt is how you have copied the circuit, I do not know much English, it seems that you have copied it from an image searched for internte. that step of copying you have not taught and I have been left with the doubt
This doesn't need to copy for internet or any other places, the process is as simple as that, you get the datasheet of the component it self 555 timer datasheet in google and you reproduce it as it is in the proteus with the technique that I showed, you do same with other components. The circuit it self it doesn't matter, the essential of this video is showing how to add such simulation to an proteus component
@@margoumix thanks for the reply. I thought that proteus could make an image of a circuit without having to do it piece by piece. That was my doubt, the rest was clear.
Hi this is Mohamed Nilufar. first of all I'm thanking to you for this tutorial, it is gives us very useful. and I had downloaded from this website "componentsearchengine.com/" and added into the Proteus which I have request device and it is given an error; when it is simulating mode as this message (No model specified for D1. [D1] and Cannot find model file 'MAX756.MDF'. Pin '/SHDN' is not modelled. [U1] Pin '3/5' is not modelled. [U1] Pin 'GND' is not modelled. [U1] Pin 'LBI' is not modelled. [U1] Pin 'LBO' is not modelled. [U1] Pin 'LX' is not modelled. [U1] Pin 'OUT' is not modelled. [U1] Pin 'REF' is not modelled. [U1] Simulation FAILED due to netlist linker error(s). ) these all errors are occurring. On the all new devices. Therefor' kindly I have request you give a solution and I'll highly appreciate you and expecting kind your response soon. Thank you,
Ho gaya babu kaam! ....Haan saale ko 0 tarike ki toh pins hain... mein kahun make device kahan hai... LOL But finally done it. ...Haan dll se toh pak jaatey hum!
@2:33 can you give me a solutions why i can't click that (paste from clipboard)
Muchas gracias por compartir tu conocimiento. Este tipo de información no es encuentra fácilmente en internet, gracias nuevamente.
Por favor
I did all that, my question is, can the child circuit be saved and attached to the parent device so, everytime I open a new session and I pickup my part I won't need to build the child circuit from scratch?
Sir, I want to simulate a circuit and I found out that there is no simulator model for the NDT2955(P-CH MOSFET) and the NDT3055(N-CH MOSFET), do you have any Idea on how to create a simulator model for these mosfets???
How to make a library and .LIB and .IDX file extension for Proteus such that when I added them into library folder i can use them in any proteus software??
Paste from where?
I have a 3 pin crash sensor. but it is not available in proteus. How can I create new design for this sensor?
You need the datasheet of that sensor including the finger prints and the internal components
how to add button or switch in external model to control internal model ¿? :(
I have an audio connector with a switch, since the model is not simulable, the switch simply does not work and what a pain to have to be getting into the internal model that I did to deactivate / activate it, any suggestions?
where to find inrernal model if it not given
becoz desiging time is not a issue ,,,there most component to rise up
The internal model is found in the datasheet
pdf1.alldatasheet.com/datasheet-pdf/view/8979/NSC/LM555.html
What if i want to use the IC i create in another file, can i save the child sheet so that it can be used in other files??
+Josue Go you can by saving it in the library
how can i save the components inside my IC in the library? could you please give some basic stepts to do so? i spent hours trying to find the way but i couldnt
+Josue Go you can start the library manager the last item in the Library menu between debug and template a dialog box will open there is a button called create library you click it to create a new custom library then it will create two files for you the .LIB and .IDX files those are useful for backup your library in the source column you will find the newly created library
need urgent help.......still getting the same problem......the components inside child sheet are not saved in a new project
Exellent video, thank you so much
Thank you JHONATAN
If I have to manually make a model then what's the use of downloading the model? I don't understand. Every component from componentsearchengine.com is blank inside?
Good question JAMES, Isis proteus doesn't provide 100% of all the components that we need somtime you look for one in the library and you dont find it or you find one with different specification than you required then you have two ways you create a circuit logic that repace the needed component or for reusability you create a component with footprints at least or if you have specifications the you can create simulation model as I did
for the site that you mentioned, this is the first time I see it
I have tried to make the same model but it doesn't work, Capacitors not charging & discharging, do you know the reason. Thanks
in the package module dialog box verify that attach hierarchy module is checked i encountred the same issue
Thanks for your reply.
Attach hierarchy module is already checked, and simulation is there but not working as in tutorial, the capacitor voltage raise to value and stop, with no more increment and no action happen inside the module.
Its wierd which isis proteus version are you using because I have a doubt about the SPICE simulator which is used by proteus to simulate ciruits try to use the same version as me proteus 7.8 SP2
it's the same version you are using in the tutorial
Is it possible to share me your design files to run on my PC to make sure the problem is coming from my software or not, appreciate your help.
Hi sir, I can’t “paste from Clipboard”. Can you help me? Thank you Sir.
Tell me please, dear friend, why almost everytime when I see a video created someone from India it sounds awful? Is it a big problem in India to find a good microphone or a good headset to record the voice properly? You definitely could have many more views if it sounds nice rather than this one with a lot of distortions and overloads.
You have reason Andrik Justme and appologize for the sound quality, yes in deed it's not easy to find a good quality microphone, the good ones are so expensive and need good investment but I'm not from india I'm from Tunisia : )
Thanks alote 🌱
You're welcome Shaima
Thank you very much
You're welcome
Thanks!
Very thank you sir,
I want to learn more on this Proteus VSM Please help me
Nice video. I want to create a sensor like LM35, any tutorial on that? I'll appreciate anyone sharing a link to.
Thank you Miyak James, this is the unique tuto in the world I think that shows how to do so
Great video!!!
Thank you and you're welcome
facebook.com/electronicsforal
hello my doubt is how you have copied the circuit, I do not know much English, it seems that you have copied it from an image searched for internte.
that step of copying you have not taught and I have been left with the doubt
This doesn't need to copy for internet or any other places, the process is as simple as that, you get the datasheet of the component it self 555 timer datasheet in google and you reproduce it as it is in the proteus with the technique that I showed, you do same with other components. The circuit it self it doesn't matter, the essential of this video is showing how to add such simulation to an proteus component
@@margoumix thanks for the reply.
I thought that proteus could make an image of a circuit without having to do it piece by piece.
That was my doubt, the rest was clear.
@@lobopk2 Isis can't do it by it self, you have to do it given that you have the appropriate data sheet with specifications from the internet
thank you a lot
Hi this is Mohamed Nilufar.
first of all I'm thanking to you for this tutorial, it is gives us very useful.
and I had downloaded from this website "componentsearchengine.com/" and added into the Proteus which I have request device and it is given an error; when it is simulating mode as this message (No model specified for D1. [D1] and Cannot find model file 'MAX756.MDF'.
Pin '/SHDN' is not modelled. [U1]
Pin '3/5' is not modelled. [U1]
Pin 'GND' is not modelled. [U1]
Pin 'LBI' is not modelled. [U1]
Pin 'LBO' is not modelled. [U1]
Pin 'LX' is not modelled. [U1]
Pin 'OUT' is not modelled. [U1]
Pin 'REF' is not modelled. [U1]
Simulation FAILED due to netlist linker error(s).
) these all errors are occurring. On the all new devices.
Therefor' kindly I have request you give a solution and I'll highly appreciate you and expecting kind your response soon.
Thank you,
Ho gaya babu kaam! ....Haan saale ko 0 tarike ki toh pins hain... mein kahun make device kahan hai... LOL But finally done it. ...Haan dll se toh pak jaatey hum!
Doesn't work ! I spent many times without any success.
hello any 1ther