I've told you in the past I speed run a mini b. If you wanna know my setup for 48p gears let me know. Its nice to run any standard pinion. I run the hot racing mount also. Like $12 bucks, totally worth it for the adjustability.
I definitely would like to know the setup for the 48p gears. The stock motor mount is not the best for adjustability. I plan on getting the upgraded one for sure.
I turned my mini b into a dragster with a vxlm traxxas motor and hobbywing 30amp esc, may try the traxxas vxl3m esc just to see if it's faster but honestly I don't like that I can't tune it like the hobbywing. I built a wheelie bar from a chassis top plate and some bearing for wheels but may have to update the wheels they blew the seals first run lol
@@UDRC85 yes they are! I use a tsm receiver to keep it under control and I put a savox servo I stole from the mini revo lol had to modify to make it fit cause it's a little bigger than the stock servo. Stock workd fine but the case on the servo busted, I also ditched the servo saver since it was super sloppy lol any tips on tightening up the steering slop in those ball joints?
Good vid, but you need a beter camera that can auto-focus on products (the car) when you move it around. The Sony ZV-1 is amazing. Recently got one. Way better than my old Sony handycam.
@@UDRC85 Great car. Not available where I am unfortunately. Will be good to see it run. As for camera equipment, lights, sound etc., it’s kind of amazing what upgrading can do. It’s all part of the RUclips game. ;)
Okay maybe it my controller just watched ur video and put my futaba reciever into my mini chevelle but when I hit the throttle/forward it goes in reverse and when I hit the brake reverse it goes forward .. All new to switching out reciever and controller went to a futaba 7pxr but the throttle is all reversed
You have to go into the setting and go to reverse. You will see TH for throttle and if it’s in normal put it in reverse then do the same for the ST for steering.
This will be my next major new RC purchase
I've told you in the past I speed run a mini b. If you wanna know my setup for 48p gears let me know. Its nice to run any standard pinion. I run the hot racing mount also. Like $12 bucks, totally worth it for the adjustability.
I've missed what kv you went with? Mines the 8200 and she absolutely screams
@@bustedaw11 I installed the 8200kv.
I definitely would like to know the setup for the 48p gears. The stock motor mount is not the best for adjustability. I plan on getting the upgraded one for sure.
@@UDRC85 she's gonna fly on that motor man believe me! I'm going to email you a couple pics on how I set my gearing up.
@@bustedaw11 I appreciate that brother.
Sweet upgrade... It's gonna fly
Team associated will come out with one because they already have the dr28 so yeah I’m pretty sure they’re working on one right now
I hope they do.
Definitely would be looking out for the video 👍🏾
I appreciate that. Hopefully I get to run it this week. It is very cold these past few days.
Those Mamba Micro are pretty beast brother!
Yes sir. I can’t wait to run it. Hopefully Tuesday. I’m curious to see what this thing does.
Great maintenance and upgrade video👍
Thank you very much. 💪🏾
I turned my mini b into a dragster with a vxlm traxxas motor and hobbywing 30amp esc, may try the traxxas vxl3m esc just to see if it's faster but honestly I don't like that I can't tune it like the hobbywing. I built a wheelie bar from a chassis top plate and some bearing for wheels but may have to update the wheels they blew the seals first run lol
That’s awesome brother. These are sone fun cars for what they are.
@@UDRC85 yes they are! I use a tsm receiver to keep it under control and I put a savox servo I stole from the mini revo lol had to modify to make it fit cause it's a little bigger than the stock servo. Stock workd fine but the case on the servo busted, I also ditched the servo saver since it was super sloppy lol any tips on tightening up the steering slop in those ball joints?
@@Todd_G_FPV I have not addressed that yet. I need to put some more time into it.
@@UDRC85 I put a ziptie around the servo saver and it helped but still super sloppy for a losi lol
@@Todd_G_FPV I’ll look into it. You still have the stock servo mount?
Nice review, thanks for sharing bro👍
Thank for watching. It is going to be fun.
Good vid, but you need a beter camera that can auto-focus on products (the car) when you move it around. The Sony ZV-1 is amazing. Recently got one. Way better than my old Sony handycam.
I appreciate the information on the camera. Thank you for watching my video also.
@@UDRC85 Great car. Not available where I am unfortunately. Will be good to see it run. As for camera equipment, lights, sound etc., it’s kind of amazing what upgrading can do. It’s all part of the RUclips game. ;)
What do you think from the micro x and x2?
💪🏾💯 nice swap
Appreciate that. 💪🏾
Okay maybe it my controller just watched ur video and put my futaba reciever into my mini chevelle but when I hit the throttle/forward it goes in reverse and when I hit the brake reverse it goes forward ..
All new to switching out reciever and controller went to a futaba 7pxr but the throttle is all reversed
You have to go into the setting and go to reverse. You will see TH for throttle and if it’s in normal put it in reverse then do the same for the ST for steering.
You have to reverse the throttle channel in all Futaba radios. Its just the way they are setup from factory.
Wait do these use 48p or mod .5 gears? I'm using a 27t pinion from my erovo mini with stock spur and didn't even notice an issue lol