Achei a ideia bem interessante mas também a serra pesada demais para a pouca potencia do motor. Talvez uma serra menor seria o ideal. De qualquer forma, eu gostei da ideia.
You should use at least 18 volts and 4 to 5 amps to get the necessary speed and torque in 775 motor to cut wood. Before that check the specs of the motor whether it can take up to 24 volts. There are lot of fake 775 motors available.
It's been almost a year since you built this. Would you please post an update on this project, the things you like about it, and any problems you ran into. I think it's pretty cool, I have parts ordered to build one, although I did order the bigger DC 895 motor.
I got mine running on 24 volts, just make a cooling system for it like I did, I added 3 5v fans, 2 intake and 1 exhaust and dont use a cheap power supply. it will last long.
Nice idea. I just think that, with very easy adjustment of sizes, a simple 710W angle grinder would be so much better in matters of speed and power and ease of use of AC voltage...
Cool video great idea, easy for me to make as I've tryed others out and they just got complicated lol, what voltage are you running the 775 motor? Are You running it at its full 36v or 24v
@@LaoZi2023 yeah they want the likes,they want you to turn on notifications and subscribe,it takes a few minutes to respond,waiting for a reply from these is the same as when I ask the wife a question lol
@@LaoZi2023 to be honest I run a table saw I made on a 775dc at 36v, these videos are just uploaded and forgot about they let the likes build up subscribers etc they have a few accounts at the same time,money grabbers more to life than being ignorant for a few quid.sorry about long replies but atleast I get back to you lmao.
@@stephencowley6226 , nice. I, on the other hand, am using almost all hand tools to build my shelves for my house I am building them for. Hand saws, wood planes, both Japanese and European planes, I do occasionally use drill and a circular saw. But I do try to limit the use as I am learning how we did things 100+ years ago.I am working on improving my mortise and tenon joinery, and looking into some Japanese joinery, using chisels and the above mentioned tools.
Just make sure the air inlets at the front are not disturbed or the motor will over heat. While these littles saws are fun they have no Riving knife for safety and are subject to kickback, these can do as much damage to your fingers as a large table saw if not more as there are no safety features in any of them like the Riving knife, brakes, emergency stops etc. Just be bloody careful using one and always watch for kickback and use a push stick and wear safety glasses.
terima kasih atas ilmunya...... bahan bahan yang di perlukan apa aja tolong di beri tahu saya ingin merakit untuk keperluan..... kerajinan..... semoga bisa bermanfaat untuk saya dan untuk umum..... sekali lagi saya ucapkan terima kasih
Not the best choice of motor. Its too underpowered (or you know, a smaller saw blade), and all the strain on its little 4mm axle you slapped an adaptor on would just tear it apart fast. Great share though
Boa noite, seu projeto e simples e muito util, principalmente para quem não tem condiçoes financeiras de adquirir uma Bancada. Seria possível vc informar as medidas ou mesmo um desenho com as marcações de furação. Sou aprendiz, tenho 63 anos, muito de marcenaria mas tenho que fazer sozinha. Obrigada por dividir seu conhecimento.
Não sei se já fez mas há uma alternativa para fazer isso. Faz com um motor de máquina de costura doméstica. Dessas chinesas mesmo. Tem uma potência em média de 100 watts. Nesse caso será melhor fazer um mancal com dois rolamentos pequenos que se encaixem em um cano de PVC. A serra deve ser uma de diâmetro de 110 mm aço carbono copm 72 dentes. Pode adquirir na Loja Mecanico. Espero ter ajudado.
بسیار عالی بود .از تماشای این برنامه لذت بردم .
Молодець ,відмінна робота
genius in its simplicity
Great idea and Thanks for sharing You have great skills Love from USA
Love it 👍👏👌👏👏
Superb, hatsoff 👌👌👌
Cute motor for a pretty project.
Good and simple.❤
Good idea. Good luck
Wonderful project
Very well! Big like, man!
Job well done good work
Parabens e gratidão por compartilhar irmão!!!
Very nice 👍👍👍
What kind of power source you used for this project?
nice video 👍👍 very useful
Muito bacana este teu projeto...gostei ...vou fazer um para mim igual ao seu!
Q motor ele usou????
Amigo q motor le pusiste ,y d cuantos W es?? Gracias
Mantap bang keren senggol dong 😁👍👍👍
Just brill fantastic
Future reference, use a sewing machine motor with pedal for speed control, it really works. Specially singer motor.
Please, what are the measurements and thicknesses of the wood used on the table
Alguém sabe o nome daquela peça que está na ponta do motor pra encaixar a serra?
E onde eu posos comprar?
Very very good job....
Achei a ideia bem interessante mas também a serra pesada demais para a pouca potencia do motor. Talvez uma serra menor seria o ideal. De qualquer forma, eu gostei da ideia.
I made the saw using same motor, it cant even cut 8mm mdf with 12v. should i use a 24v adapter ?
You should use at least 18 volts and 4 to 5 amps to get the necessary speed and torque in 775 motor to cut wood. Before that check the specs of the motor whether it can take up to 24 volts. There are lot of fake 775 motors available.
@@madhusoodanshimoga5725 thank you for the suggestion sir
@@wonderingartist welcome. Hope you will be able to achieve what you want to do.
Những Tưởng thế này rất hay
good idea pro
peralatan ya dia pun sudah canggih dan bagus
can u tell me the blac scew u have used on the rotating tip of DC Motor ?
Moter ka jo bled kise banaye aur lagaye.
Please comment karo bro
Идея хорошая, но я бы поставил ещё расклинивающий нож! Безопасность должна быть.
سلام
این موتور چی چه نوع دینامیه ممنون میشم راهنمایی کنید
Ficou muitobom so uma pergunta que motor e que vose esta usando fala paramin
Good job
It's been almost a year since you built this. Would you please post an update on this project, the things you like about it, and any problems you ran into. I think it's pretty cool, I have parts ordered to build one, although I did order the bigger DC 895 motor.
I got mine running on 24 volts, just make a cooling system for it like I did, I added 3 5v fans, 2 intake and 1 exhaust and dont use a cheap power supply. it will last long.
How thick can it be cut?
Really cool thanks
Que tipo de motor es?
Estupenda que motor se le puso???
People who try this without a gearbox will be very disappointed. 😂
Merhaba , Motorun çalışması için kaç volt kaç amperlik akım verdiniz. Teşekkürler..
Ý tưởng tuyệt vời nhưng cách làm của bạn không làm tay đẩy gỗ rất nguy hiểm khi thao tác động cơ điện quá nhỏ để của gỗ
Hello 👍👏👏👏🌷
Great idea with dc motor 😎👍 definitely i should make this, thank you
Nice
With Which motor have been run
Pls tell me
I wonder if that blade is a bit big for a 775...
Nice idea. I just think that, with very easy adjustment of sizes, a simple 710W angle grinder would be so much better in matters of speed and power and ease of use of AC voltage...
Cool video great idea, easy for me to make as I've tryed others out and they just got complicated lol, what voltage are you running the 775 motor? Are You running it at its full 36v or 24v
doesn't it make you mad when the videographers don't respond?
@@LaoZi2023 yeah they want the likes,they want you to turn on notifications and subscribe,it takes a few minutes to respond,waiting for a reply from these is the same as when I ask the wife a question lol
@@stephencowley6226 , it makes one wonder if they’re in cahoots!
@@LaoZi2023 to be honest I run a table saw I made on a 775dc at 36v, these videos are just uploaded and forgot about they let the likes build up subscribers etc they have a few accounts at the same time,money grabbers more to life than being ignorant for a few quid.sorry about long replies but atleast I get back to you lmao.
@@stephencowley6226 , nice. I, on the other hand, am using almost all hand tools to build my shelves for my house I am building them for. Hand saws, wood planes, both Japanese and European planes, I do occasionally use drill and a circular saw. But I do try to limit the use as I am learning how we did things 100+ years ago.I am working on improving my mortise and tenon joinery, and looking into some Japanese joinery, using chisels and the above mentioned tools.
How about for angle 45⁰ ?
How do I purchase the project with the measurements of the table and which engine you used
Esse motor corta MDF?
Just make sure the air inlets at the front are not disturbed or the motor will over heat. While these littles saws are fun they have no Riving knife for safety and are subject to kickback, these can do as much damage to your fingers as a large table saw if not more as there are no safety features in any of them like the Riving knife, brakes, emergency stops etc. Just be bloody careful using one and always watch for kickback and use a push stick and wear safety glasses.
Elinize sağlık çok güzel olmuş niye ölçüleri yazmıyorsunuz
terima kasih atas ilmunya...... bahan bahan yang di perlukan apa aja tolong di beri tahu saya ingin merakit untuk keperluan..... kerajinan..... semoga bisa bermanfaat untuk saya dan untuk umum..... sekali lagi saya ucapkan terima kasih
Boa noite meu amigo gostei muito gostaria de saber o valor pra você fábrica uma bancada assim pra mim me responde por favor obrigado
Здравствуй, а размеры столика и остального, где я могу посмотреть?
А так же, моторчик какой мощности и диаметр самой пилы.
Where can't I get the motor..
Name of the tools please
La idea esta buena, la duda es que motor usaste ?
He used the 775 12V DC motor.
Super
Что за моторчик? И где его приобрести?
Que tipo de motor é Esse?
Hey, its a GOOD IDEA! Thanks for being inspiring.. could you give us the measurement for this projects? Thank youu
did you get the measurements??.If so plse copy me. Thanks
To me also plz. Thanks
Süper mükkemmel👍
Measurement please.....
Q medidad tiene los pernos y de q capasidad es el motor ygrasiad por las ideas y q Dios los ve diga
Itu pakai dinamo apa bang? Kalau pakai dinamo printer bisa gak?
How to get the motor and what is the name of it
Execelent!
Depois de 1 ano de publicação achei super atual só que faltou as medidas e a potência do motor.
Poderia nos passar.
I think...the diameter of the blade isn't suitable with the motor...its too big...too much😅😅😢😢😢😢
De que medida es el sujetador del disco ??
Hello, how much volt and amper did you use for this motor? Thank you.
24 volt and 1 amper
sub to my channel for more
info sub to RAFAY GAMING
superb
Le voltage que vous utiliser est de combien
most impotent things u dint show,i mean motor connection how did u do and which adaptor or direct?
Could you tell me what motor you use for the circular saw and put the link where to buy it?
Search for "775 motor power"....
Power suplai?
Please, What is specificatins of the power supply - Voltage = 12V and current? What wood saw diameter? 4 pol. ?
istimewaaa
Qual a tenção desse motor e a sua amperagem?
Nice one bro
Очень бюджетно! А какой диаметр диска? Very budgetary! What is the diameter of the disc?
Good job. I was able to make one automatic that works on 12 volts.
I think the only wrong with this video is when you push the wood to saw blade without push stick, you know right how dangereous table saw is, right?
мужик ты красава
ุWhat wood do you use
MATCHSTICK ! WOOD !!
Not the best choice of motor. Its too underpowered (or you know, a smaller saw blade), and all the strain on its little 4mm axle you slapped an adaptor on would just tear it apart fast. Great share though
How much power supply ?
maaf pak, itu menggunakan dinamo 775 berapa Volt/watt dan PSU berapa Volt/A?? 🙏
Hello dear
Where can I find the electric motor and what is its name and power?
You may purchase from Amazon. 775 motor 12 volt dc.
Sabes interesante¡¡¡¡¡¡¡
Pero no explicas lo del motor sería genial si lo hicieras.
Gracias bendiciones
Wat is the Motor
Boa noite, seu projeto e simples e muito util, principalmente para quem não tem condiçoes financeiras de adquirir uma Bancada. Seria possível vc informar as medidas ou mesmo um desenho com as marcações de furação. Sou aprendiz, tenho 63 anos, muito de marcenaria mas tenho que fazer sozinha. Obrigada por dividir seu conhecimento.
Não sei se já fez mas há uma alternativa para fazer isso. Faz com um motor de máquina de costura doméstica. Dessas chinesas mesmo. Tem uma potência em média de 100 watts. Nesse caso será melhor fazer um mancal com dois rolamentos pequenos que se encaixem em um cano de PVC.
A serra deve ser uma de diâmetro de 110 mm aço carbono copm 72 dentes. Pode adquirir na Loja Mecanico. Espero ter ajudado.
Motor buying link??
OLHA O DEDO CARA .ACIDENTES DE TRABALHO ACONTECEM SABIA ? Tira o dedo polegar daí!
Great idea
Скажите пожалуйста, какой размер диска?
Reasonably ! GOOD ! MATCHSTICK !! AND !! FINGER !! CUTTER !! THIS !! ANYTHING ! LARGER !?? WELL ! THATS ! WHY ! PROPER ! TOOLS !! ARE FOUND !IN ! HARDWARE !! STORES !! BUT ! NICE ! CONTRAPTION !! THOUGH !!
Sao phong cách video giống kênh the amazing woodworking techniques thế nhỉ?, Có phải cùng 1 người không?