Thanks Todd! Ever see a 4x2 day cab running a pup (28 ft) trailer box truck loads for relay? Just wondering? Also, are 53' PO weights listed when you click on the loads and are they fairly accurate? Valhalla!! Bad Axe!!
Hey, sorry for my delayed response, I’ve been working a ton. I have seen it one time down at SAN5. They usually keep the semis on the east side of the building and the box trucks on the west side of the building so seeing a semi over there stood out to me. I suppose you could pull it off but I would be concerned of where I was sent to. You’re gonna have zero problem maneuvering that thing inside an Amazon yard, but when you get to a little tiny post office location (Jamul comes to mind), then what? Gonna need way more trucking skills than I possess to pull that off. The weights listed are few and far between. I rarely see a weight on an Amazon➡️Amazon load however though out my experience, these have been around 10K lbs or less. Amazon↔️3P sites occasionally have weights, but even still, most do not. If you see it going to a place associated with beverages (I.E. Pepsi in Lakeside) it’s gonna be 45K Even though it’s a 3P site, TIJ5 is always light, it’s like a regular Amazon load There’s a cardboard place off of Market street, I believe it’s called “SD Fibres/Fibers”, they always list the weight at 45K, I’ve never had it be above 15K and I know this because I have to scale on-site before and after. “Where you from” “BAD AXE” It just feels like it would improves one’s game in the dating world I’m a Monte Vista guy but Valhalla is just closer to the house and I needed a decent backdrop. 👊🏻🍻
I opened a new company and I got access to the load board and contract after two days they disable contract button I open cases they say it's from our end and you will automatic got access and my score is 98.9 and it's been 5 weeks
I would open another case for sure. Have you met their new 10 load minimum over the last active six weeks? The reason I ask is because since making this change, I’ve heard from several people that some functionality is disabled until hits the 10 load minimum.
I have questions: 1. What is your grade? 2. Have you established a grade yet? I know when you start with Amazon you have to complete ten loads within a six-week period in order to establish a grade, until then they show you very limited loads. I just need more info to properly answer. 👊🏻🍻
hey love the videos keep up the good work. could you do a long format load board video for Ottawa Ontario Canada @ 100 mile radius for 53ft trailers thanks in advance.
Unfortunately, I don’t have access to the Canadian load boards. Even though both countries use the Relay platform, they are essentially run on different networks and I can’t see them. Ive had some questions out of Canada before I regrettably couldn’t answer due to this limitation. I would do it if I could. 👊🏻🍻
@@STATTrucking no problem i appreciate your'e response. Is it normal to see mininal loads when your'e new to the relay program? I.e ive seen only 3 loads within the last fifteen days and was lucky to book my first load yesterday loads didnt stay on load board for more than 5 min. Do you know if this is due to me having no performace score yet?
@martinbarrett4479 This had been a common complaint from people using Relay in Canada. I know when you start here and your “grade” is yet to be determined, you do see very limited loads compared to what you see when your grade is established. From what I have gathered from comments on here from Canadian Relay users, it sounds like the situation is exacerbated there. I suspect you are seeing limited loads due to your grade being an “unknown” but I also know that to establish a grade, you need to run a minimum of 10 loads in a six week period which is frustrating. If worse came to worse, it might be worth doing post-a-truck for a couple weeks to meet their 10 load minimum requirement and then revisiting the load board to see if with a grade things improve. 👊🏻🍻
Thanks Todd! Ever see a 4x2 day cab running a pup (28 ft) trailer box truck loads for relay? Just wondering? Also, are 53' PO weights listed when you click on the loads and are they fairly accurate? Valhalla!!
Thanks!
👊🏻🍻
Could you do San Bernardino in long format . Thanks for all the great videos Todd .
It’s on the list.
👊🏻🍻
Thanks Todd! Ever see a 4x2 day cab running a pup (28 ft) trailer box truck loads for relay? Just wondering? Also, are 53' PO weights listed when you click on the loads and are they fairly accurate? Valhalla!! Bad Axe!!
Hey, sorry for my delayed response, I’ve been working a ton. I have seen it one time down at SAN5. They usually keep the semis on the east side of the building and the box trucks on the west side of the building so seeing a semi over there stood out to me. I suppose you could pull it off but I would be concerned of where I was sent to. You’re gonna have zero problem maneuvering that thing inside an Amazon yard, but when you get to a little tiny post office location (Jamul comes to mind), then what? Gonna need way more trucking skills than I possess to pull that off.
The weights listed are few and far between. I rarely see a weight on an Amazon➡️Amazon load however though out my experience, these have been around 10K lbs or less. Amazon↔️3P sites occasionally have weights, but even still, most do not.
If you see it going to a place associated with beverages (I.E. Pepsi in Lakeside) it’s gonna be 45K
Even though it’s a 3P site, TIJ5 is always light, it’s like a regular Amazon load
There’s a cardboard place off of Market street, I believe it’s called “SD Fibres/Fibers”, they always list the weight at 45K, I’ve never had it be above 15K and I know this because I have to scale on-site before and after.
“Where you from”
“BAD AXE”
It just feels like it would improves one’s game in the dating world
I’m a Monte Vista guy but Valhalla is just closer to the house and I needed a decent backdrop.
👊🏻🍻
Need to see Phoenix,AZ 53 power load please
ruclips.net/user/shortsnkPqK6llE7o?si=jgNCHmYRx-q_Kgfh
👊🏻🍻
Long format Pflugerville Texas 250 Radius 53 ft. Thanks
You just want to hear me struggle with “Fal-Luger-Ville” 😂
It’s on the list
👊🏻🍻
I opened a new company and I got access to the load board and contract after two days they disable contract button I open cases they say it's from our end and you will automatic got access and my score is 98.9 and it's been 5 weeks
I would open another case for sure. Have you met their new 10 load minimum over the last active six weeks?
The reason I ask is because since making this change, I’ve heard from several people that some functionality is disabled until hits the 10 load minimum.
My relay load board showing ½ load only, please help🙏
I have questions:
1. What is your grade?
2. Have you established a grade yet?
I know when you start with Amazon you have to complete ten loads within a six-week period in order to establish a grade, until then they show you very limited loads.
I just need more info to properly answer.
👊🏻🍻
hey love the videos keep up the good work. could you do a long format load board video for Ottawa Ontario Canada @ 100 mile radius for 53ft trailers thanks in advance.
Unfortunately, I don’t have access to the Canadian load boards. Even though both countries use the Relay platform, they are essentially run on different networks and I can’t see them. Ive had some questions out of Canada before I regrettably couldn’t answer due to this limitation. I would do it if I could.
👊🏻🍻
@@STATTrucking no problem i appreciate your'e response. Is it normal to see mininal loads when your'e new to the relay program? I.e ive seen only 3 loads within the last fifteen days and was lucky to book my first load yesterday loads didnt stay on load board for more than 5 min. Do you know if this is due to me having no performace score yet?
@martinbarrett4479
This had been a common complaint from people using Relay in Canada. I know when you start here and your “grade” is yet to be determined, you do see very limited loads compared to what you see when your grade is established. From what I have gathered from comments on here from Canadian Relay users, it sounds like the situation is exacerbated there. I suspect you are seeing limited loads due to your grade being an “unknown” but I also know that to establish a grade, you need to run a minimum of 10 loads in a six week period which is frustrating.
If worse came to worse, it might be worth doing post-a-truck for a couple weeks to meet their 10 load minimum requirement and then revisiting the load board to see if with a grade things improve.
👊🏻🍻
@@STATTrucking thanks for the response and clairifying that for me. Ill definetly try post a truck.
Thanks Todd! Ever see a 4x2 day cab running a pup (28 ft) trailer box truck loads for relay? Just wondering? Also, are 53' PO weights listed when you click on the loads and are they fairly accurate? Valhalla!!