ASUS X551M Laptop Screen Replacement Procedure
HTML-код
- Опубликовано: 26 сен 2024
- Order this screen online at: www.screensurg...
free shipping + free tool kit (special pricing for schools/repair shops/IT Departments, POs accepted)
Step by step instructions to replace a cracked screen on a ASUS X551M laptop computer.
So I'm here to say if I can do it from following the directions of this generous man, you can too. I have the exact model every step was exact so following directions was simple. My laptop had such a tiny scratch I didn't really think the issue was with the screen itself but when I connected my laptop with the HDMI cord to the TV I realized the laptop was fine. I ordered the screen; had it for couple weeks because I didn't think I could do it myself but I did it. You can too. Good luck! Thank you for this video!
There is One thing that you should be aware of. When removing LCD/LED Screens, you really should remove all power sources IE: LI-ION Batteries as you can sometimes short out the replacement LCD Screens. Trust me, I have done this early in my long computer repair career. If there is power running through the computer (even if the computer is off), you can short out the screen when you insert the LCD ribbon cable on the LCD screen cable slot if you accidentally touch the metal connectors. The problem is that with this model, you can not EASILY remove the battery and would require a disassembly of the lid to get to the battery. Just a friendly caution.
Thanks!
Esto es cierto, debe retirarse cualquier fuente de alimentacion y veo que en este video no se explica eso.This is true , you must withdraw any power supply and I see in this video is not explained that.
@@jh_sistemas That's becasue the battery is accessed by removing the keyboard and I believe several other key innards just to reach it.
can i send my labtop in to you so you can repair it
Thank you! Thank you! Just a note: You forgot to mention, when putting the new screen on, you have to remember to tighten the 3 hinge screws on each side that you loosened to access the side screws. Thanks again!
SUPER EASY
Shipment of the screen came very quickly. Well wrapped with bubble wrap to secure no sliding around the box. It came with tools and instructions which was a plus for me. You need plenty of light. Best time I did it in the morning. I had bottle caps to keep the screws together for each section of the laptop in one spot, so the screws doesn't mix up with other screws. In my opinion, that is to keep it organized. In overall the screen was crystal clear. Thank you for your service and Thank you for linking it to your videos. I am a very happy customer. 5 stars.
Thank you so much!! I followed your instructions and it was simple!!
I want to thank you. I have the D550MA-DS01 which is practically the same. Mine didn't have the foil or the foam block attached to the back of the screen, though - they were attached to the inside of the top cover. A top cover which is labeled X551M, just in case you were wondering how similar these things are. After hitting ice Christmas Eve and landing on my backpack (and therefore my laptop) I had to save some pennies and get a screen off eBay. Thanks to your awesome video, I swapped the screen in about 15 minutes using improvised tools and stuff. Only took that long because I dropped a screw.
Great tutorial, the patience and detailed steps made it easy follow along successfully. Kudos and thank you.
Eieueywuwye7wueieueiueueueueeueueyeuueueruueueuerieuwieuiehtffuvug7gyfyfyfcycyct gg hu tt5rd55r6rctcctfcfc6ffyfyfyudieieueueyeehe8eh8eeyueoehwiwyw8w ye hsbw8wownzmahe8e
Ejiehwhe8ehwuwuieueueueieyeueeueiueieieirieo3ieieuierjuendx. Ejieiejeienekekejeuwye7ey8eheiheueyeueue7eueyeuehueu3heu3uieieuueueueuueheu3uriiri3ueueuueuuueu3u3iue urueu3ueu3i3ueueueueheieh8egeueheueu2i3hu33uuerutrayyrtetet55ue5uu5tueututti6ir6oeiw6riwryi6r66isryspeotrrir66o66w7t6iwr6iwrw57oe76wryrytuyiayiyyiyssouusfuyrsyyaasutsuustusyros6ts7t
4ww477o77e7twryr7w7s6tjyys7srs77t75575p57664653w6s5i6rysysrulrursysrrsr6ryr6r6koa6a6eear66r6s6r6rrs6rr6rsr6e6e6a65e564t76rro6rsr76ryi6io6r6ryr55uyir6iiyrs77o7outfyut7t7s7eo7t6routd7to77sr7w7577rs6e6
Ryra6a6er66a66ar6rar6s6s6s66r66666o6ro6w6r6o6rrs8tsitutriurruruutekejejejejejeiejeidjdjidueiduwuweuudduudududududududydidudiehdudduuddhurudurururueudueuurjdhdhfhrhrhrhrhrhrjdjueueueurururueyydydhrudurueuueufurururururururueuruururirurieheieururueurururuduurrueuur
Iririeuehei3iwheieu1ohr
THANK YOU THANK YOU THANK YOU!!!! Just a suggestion for anyone else trying this for the first time... If you don't have a regular work surface and decide to do this on the floor... put down a light colored sheet first... those little screws jump out and dive into carpeting, then you'll find yourself at the local computer repair guy begging for spare screws! :-) jus' saying'!
Thanks!!! FolloWed this step by step and it was a success!!!
Just Fantastic.. Beautiful explanations.. Thanks
Hi, first of all, keep posting, your videos are very informative. I have an ASUS VIVOBOOK 14" screen, and the screen is broken. I was wondering if I can change the screen of my ASUS for any other 14" laptop screen, eg. Samsung, HP, Dell, etc. Thanks a lot.
love this video, just bought ur screen ! gana buy another one for my other asus ;)
Cheers for that, this was a lot easier than the last one I did
Congratulations for the instructive video :D, i have a simple question.
What important details I have to consider when replacing a screen:
. resolution
.pin connectors
-touch none touch
. eDP or VLS
What else....about the energy maybe?
If I make a mistake selecting a wrong one, what is the worst that could happen to a Laptop?
Great video! just replaced my wife's screen in her laptop, works like a charm! Thanks! +1 sub
The best review for screen replacement with small details so someone could avoid mistakes. I would like to inform everybody that the aluminum foil (13:00 in video) was described as there due to some reason. The actual reason is to avoid touch the logic board accidentally which could kill the display due to static current. Also this works as a heat sync to distribute heat generated during operation. This is why all sensitive electric parts are sealed to avoid human touch. Professionals wear a metal brass when working with such parts.
Is there anything I need to know about not touching certain parts of the laptop while it's open? I somehow messed up my webcam on a laptop I replaced the screen on a few years back by touching some part I shouldn't have. I don't want to do that again. I NEED my webcam for Skyping with my son stationed 15 hours away.
Awesome!! My screen isn't cracked anymore!! :') thank you do much!
I need a video to replace the compleet top.
Thanks so much for this. I am going to replace my screen because I stepped on my laptop when I was getting out of bead and it was on the floor. 🤦🏼♀️
MJ T same shit hear
Thank you for explaining detailed.
other guys dont explain the screen cable removal properly.
All Fixed...Thank you!!!!
You are good man I only got to half a video and I had it already opened thank you.
yo, thank you soooooooooo much! i did this in a half hour and now im happy as fuck!!
Thank you, sir. I had F551M so it's similar, but this video helps me a lot.
Is this the same procedure for ASUS X751M?
This was of much help with my ASUS GL552VW, and I suposse it will also work with all ROG series.
The procedure was the same with minor changes: (OF COURSE I USED THE MODEL OF SCREEN COMPATIBLE WITH GL552VW, NOT THE ONE ON THIS VIDEO)
-The plastics that cover the hinges are now separate pieces, you can easily remove then before removing the bezel and put them back later, they attach by plastic tabs.
-There are no screws on the side of the screen, so you dont have to remove the metal pieces that hold it, just unscrew the 4 screws that hold the screen, two on top, two on the bottom, and it will come off.
-The small metal pieces in the screen where the screws go are part of the screen, the replacement screen will come with them, you don't need to remove them (you couldn't either).
Is the screen 15.6 inch dimension?
Thank you for the video. I changed X551C and is the same to this laptop.
Thnks man.. i'm so gonna try it on my asus👍
it helps a lot, thank you :)
Good educational video bro
Screen Surgeons! please do a video on screen replacement of Asus X555L please! thank you :D
+radiocabea player Can you not use the same procedure as above, or are they that much different?
+Mark Brenner its different... Like not A LOT different but the screws and stuff are different
Ah I see. I have a client I have to repair the screen on and I don't really have much of a guide to use. Shouldn't be too different than this one, right? I mean besides everything lol
+Mark Brenner yeah xD like this computer (on the video) is kinda old so i think its different
+Mark Brenner like the screens are different so yeah k think they are very different xD
Very well clear explanation. Thanks for sharing.
I just couldn't see wireless antenna's place,where is it ? and is there just one antenna ?
So I am worried I shorted out the laptop! I replaced the screen but now all I am getting is a high pitched sound when the battery is in or when the battery is out but computer is plugged in. ... help pls or at least confirm my worst fears.
I have question, this white cable on left side of screen is from camera yes?
can you do one on the display backlights? my laptop works but the lights inside dont turn on.. .
It was really helpful, thank you!
Great Video! Thanks for making it.
Do you have a screen replacement video for ASUS X751LN? Or should I follow the same steps?
Thanks man your video help out big time!!!!
My labtop is the same as that but everytime i try Turing it on, it just stays black and noting happens. so I'm wondering.. do you think my labtop screen/monitor is broken or cracked?
Did you plug it in first? Cause sometimes my computer will be like fully charged, but it wont turn on unless the charger is plugged in. Also, I think that if your screen was cracked completely, it would be showing a few weird colors. That's how it was for my sister's laptop when I broke it :D
Wait maybe it's the battery-
Can you do an X553SA-BHCLN LCD replacement? Mine broke and need help repairing it
Are all asus models the same? cuz i have the X751L and it looms extremely similar
Do you not remove the battery first? Or is that unnecessary and too much of a pain in this case? (since you have to take the keyboard off)
It's better to remove but in this line it's too complicated because you have to physically open the laptop
+TomDufall || I've done screen replacements while the machine was displaying a page. When you make the connection, the screen lights up and you know the job will be a success.
As a general rule, disconnect the power before you do repairs, but it's not as critical as people would have you believe. In this case, we're only dealing with a few volts. The possible spark is unlikely to harm the connector.
I've recieved two screens now since trying to replace my cracked screen and both screens light up well when I plug them in but neither displays anything other than a dark screen lit up
Thanks, great video!
can i use the screen of toshiba satellite as temporary screen in my asus f502c? do the have the same connecting cables at the back of lcd ?
Thanks a MILLION!
I have the touch screen version. Can I use the same method?
Same as the ASUS r510jx ?
Thank you very much!
I have a x550cl can o replace screen for a higher resolution one?
can i replace my broken laptop screen with other different laptop model screen? Please help me. :)
Yes you may but it would still depend if they use the same type of screen. If you can provide both models, I can help you determine if you may swap them.
Thank you
I dropped mine and it landed on the corner of the led screen and cracked the plastic. The little section of the plastic came off. Everything seems to be working ok except for the camera and microphone. There's a thin wire that runs up and along the screen. This wire is broke at the corner. Does anybody know if this leads to the camera and mic and can it be soldered and repaired? Would appreciate any help.
+Billy Boy -- If you can see that definitely "a wire" is broke, of course, soldering it back together would help. However, that's actually a cable with a few wires inside. 5:18 shows the cable routing around the upper left (looking at normally, user's left) corner to the cam/mic.
Soldering a splice to small wire is a delicate job. If only one wire in the cable is broke, it's doable. Jump the wire first, and see if that repairs things.
+Nehmo Sergheyev Thank you for your reply. Luckily I purchased damage insurance when I bought the laptop and it was in effect.. The entire wire was broke. They repaired it and replaced the back cover with a new one. I had it back in a week. I couldn't have done the soldering on that tiny wire. The insurance was worth the price.
Will this work on non touchscreen X550z?
Is it the same as in the Asus X555L? in the screen?
+Christopher Dela Cruz No.
Can you make one? thanks!
What about Asus X750J? Is it the similar? Thank you.
Excelente
15:15 size 15.6
Can u do a video on a asus k501
please help me with he removal of asus q302la screen
Is it compatable with a asus x551c
Thanks 👍👍
Is this the same as Asus x550jx ?
Gave you replaced your scrren
I have also x550 jk on which i just steped and crushed the screen
Did you order new one and where online
thanx
i punched my pc screen & it doesn't work anymore
That's exactly what I did too
+Bob Jones -- Your report makes me want to try. Did you just pinch some of the screen at the center? How hard? Is it now totally blank?
If you have an older laptop you could have broken the CCFL lamp. Newer laptops have an LED screen. If you have 2 small hinges, then it has an LED backlight. If it has one long hinge that goes all the way across, then you have a CCFL backlight. I don't know if a CCFL can be replaced without replacing the screen. I also have trouble with my temper.
same
You need a therapist for that anger.
My laptop is only just over a year old, so I'm almost certain it's just the LCD screen that's messed up.
My connector won't connect and it sparked?
+Michael Pierzchala Then you sir, did not disconnect power from your machine, or you did not ground yourself.
Nice sir
You pretty much broke at least 4 plastic hooks/standoffs/stands or however you want to call them by removing the bezel so forcefully. The corners of the bezel will never close shut again and it's gonna look and feel like crap. I can see the broken plastic pieces at 5:02. Nice job man.
I did my exact same laptop the exact same way he showed in the video and have no issues what so ever
+tougemaster || I only see one piece of plastic at that point in the video. The delicateness-roughness level of this job is debatable and the recommended level is hard to communicate to someone in any case. You need real caution when dealing with the electrical connectors, but if you're removing a don't-matter piece of plastic, you can tear it off.
You actually can assess someone's skill level just by watching how and where they are careful. Ignorant people take precautions where they aren't needed. You must be careful if you don't know what you are doing.
In the way he does the balance, Screen Surgeons has a decent respect for possible damage. I'd go faster, myself, but that's partially my philosophy intruding. You shouldn't waste precious moments of limited life just to forestall possible criticism of trite appearances.
Thanks 5*****
In my opinion, you explain too much and you're doing it slowly. But good work. Thank.
will the laptop work though a moniter without the screen??
Thanks, im replace after 10 min. Work! Thanks dude!