I've seen anywhere from 181 ft lbs to 242 ft lbs for the axle nut. Might have to call the dealer to confirm or check the service repair manual if you can find one.
What was the symptom of the wheel bearing? My 2010 Pilot shakes after pulling a trailer. I’ve changed tires, suspension, links, bushings. Running out of options. Thank you
Would this be basically the same process for a 2014 Honda accord? I can't find any good videos showing a 2014 accord front wheel hub & barring replacement
![Lp. Сердце Вселенной #53 ВОПЛОЩЕНИЕ [Заражённый Лололошка] • Майнкрафт](/img/1.gif)
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Isn’t the axle nut 36mm ?
Excellent video. It's much easier than I expected. I'm going to purchase a new wheel hub for my wife's Pilot.
Isn’t the axle nut 36 mm
Wish my 2005 Pilot had this set up. Great Job! Thanks! 😁👍👍
Great video, I appreciated the torque specs detail.
Seeing the new 35 mm axle nut socket not fit was real disappointing. Thought 3 trips would be enough but here I go again
I've seen anywhere from 181 ft lbs to 242 ft lbs for the axle nut. Might have to call the dealer to confirm or check the service repair manual if you can find one.
What was the symptom of the wheel bearing? My 2010 Pilot shakes after pulling a trailer. I’ve changed tires, suspension, links, bushings. Running out of options. Thank you
Would this be basically the same process for a 2014 Honda accord? I can't find any good videos showing a 2014 accord front wheel hub & barring replacement
+@nathanwoten6236 Yes, the installation process would be similar.
Is the pilot 2016 any different than the 2015, i know the axle nut is 36 mm on my 2016, i need to replace wheel bearings
Im now ready to tackle this job. If only my car wasnt a rust bucket
Excellent video!
I just did this today and it was honestly the worst job I've done!!! Hammering that hub out was crazy!
+JUANR06 Thanks for watching our video! 1aau.to/m/Shop-TRQ
Great video
Mine took a 36mm socket for the axle nut.
Well done
Torque specs for lug nut 94 ft.lb
FOR ALL HONDAS ITS A 36MM NOT 35 LIKE HE SAID… UNFORTUNATELY MY HUSBAND AND I FOUND THIS OUT THE HARD WAY…
Why did you forget about the rotor screws???
I sure wish my Honda would use this style of hub and bearing on the smaller cars such as the Fit. The pressed in bearings are horrible to deal with.