It says "moving the highlighted wall to the highlighted element moves the wall's top below ts bottom or its bottom above it's top, or interferes with wall joins or holes in wall"
Not sure if you will respond but I would appreciate it if you could provide some feedback. I have a project with two seperate apartment buildings and a shared underground parkade with a ramp between both parkades. One building is higher up a hill and one is lower. Would it make more sense to link in both buildings to a shared model where I then model the parkade. Or should I draw the parkades separately with the opening and tunnel drawn on one and then link them together on the shared model? Thanks for any help!
When I select the profiles, my work planes aren’t flush with the walls which messes up the void form and I cannot find a way to fix it. Also when I selected my outside line when starting to create the void the profile 1 and 2 were on the wrong sides. I tried the inner line and it worked but there was still the issue with the skew work planes. Thanks for the videos!!
Balkin Architect you're a boss ! Life saver thank you!
Wow ... beautiful ... First in place example after toplosolid introduced in it ..... thank you 😊
i love u, i didnt know how cut the topography and now i know it thank u
Thank you sir, your videos are always helpful
Right on time. Thank you!
Hi, Can you make tutorial how you add a car from slope car road in revit please?
hay balkan
can you plz explain the nested families,
Big acritarched buildering
It says "moving the highlighted wall to the highlighted element moves the wall's top below ts bottom or its bottom above it's top, or interferes with wall joins or holes in wall"
thank you!
Need the 2 part .
usefull as always
Not sure if you will respond but I would appreciate it if you could provide some feedback. I have a project with two seperate apartment buildings and a shared underground parkade with a ramp between both parkades. One building is higher up a hill and one is lower. Would it make more sense to link in both buildings to a shared model where I then model the parkade. Or should I draw the parkades separately with the opening and tunnel drawn on one and then link them together on the shared model? Thanks for any help!
Why didn't you use building pad. Takes half the time of this.
It's toposolid not toposurface .... and version is 2024 and its different ... no building pads in toposolid .... they removed it in version 2024
very nice
Wonderful
When I select the profiles, my work planes aren’t flush with the walls which messes up the void form and I cannot find a way to fix it. Also when I selected my outside line when starting to create the void the profile 1 and 2 were on the wrong sides. I tried the inner line and it worked but there was still the issue with the skew work planes. Thanks for the videos!!
Lovely
The void sweep along the ramp isn't working for me. I'm using the 2023 version.
Awesome
How would you generate a inclined foundation plate and roof slab?
When i attatch to base it says error. What do i do, and it doesnt want to connect to floor
you have to click on base option, revit default is top option
@@martinbilic7242 it says Can't keep wall and target joined
If I just buy a course does that mean I have access to it forever?
Putisimo amo
Hi is it possible to model a statue in revit
🔥🔥🔥
mr Balkan never replies to any comments, it seems he never reads the comments🤔
🙏