Witch one of the 3 is able to reinstal modules and reprogram modules? I have bimercode and i cant reinstal the rear Pdc module for example.. Replaced it for another and cant make it work..
Thank you for this great explanation, but I was wondering if we could use Bimmerlink to change turn signal flash from 3 to 5 with one click, because I will be needing this app to reset new battery, thanks again
Hi Joe ..thanks for your vid ..I like to code my 7 series 2016 do you think I can make my exhaust sound a little sportier ? Some one said you can code that your exhaust is constantly on sports plus..which is when the exhaust flaps stays opened never closed.. Regards.. M.G.
Great video explaining the differences between the 3 apps. Concerning the DPF, What level of Ash soot would warrant a forced regen and are there dangers associated with forcing a regen with the apps?
This is an excellent video to show the 3 applications. The Engine Oil Level displays a number without units. In my case, 255. I have searched the internet for an explanation of what this number means and cannot find one. I apologize for wasting your time if the answer is obvious, but I am at a loss. Is it 255 cl, 2.55 litres or 25.5%?
I’m not a BMW pro but 255 (or FF in Hex) is the highest number available to an unsigned 8-bit integer for a computer. It might represent 100% in the case of the ECU. Best way to test it would be to drain a little oil during an oil change and then try to see what number appears (though I’d definitely suggest attempting it without running your engine!)
Hi, I was wondering which app would be better to show additive and multiplicative fuel trim settings as well as Lambda values? I am trying to fix some lean codes so this information would be useful to track, particularly in a graph form.
That function releases the brake shoes when you want to replace the brake discs. Inside the rear brake drums there are two brake shoes and you need to release them before attempting to hammer your old discs to replace 👍
What if the BimmerLink doesn’t show the brake icon that I’m looking for to change the rear brakes? Is there another way to release or press the piston back?
It shows the function on the application no matter what. This function is for electronic brake systems without hand lever. You can't take off the brake discs without disabling the parking brakes.
I will be upgrading the Combox hardware from the 2G to 4G combox. I was told I will need to change the VIN number that's coded in the Combox to my car's VIN number. Will this application allow you to make these changes?
Hello Thank you for fantastic and informative videos. I wonder if you can help me. I live in Sweden and it is possible to register a car as a tractor to enable 15 year-olds to drive cars up to 30km/h. I was looking for a way to limit rpm via ecu so the car only can go 30km/h in second gear. Is there an easy way to accomplish that? Thank you in advance
Hi, I'm glad you enjoyed the video 🤠 Bmw has a speed limit warning sound if you enable it. Other option is to use it in manual steptronic gear and keep it on M2, so car doesn't change gear.
bimmer tool air mass expert value 1300 in my car f10 520d In the video, the air mass expert gapping 1300 is there a problem with the MAF sensor or the oxygen sensor? In what case is this estimate high?
I'm not too sure about exact values of everything really. They always flacuate when engine is running. BimmerTool has some expected values but I never pay attention to be honest.
I don't know what to do, I have a bmw x5 (f15) from 2015 and it has very bad fuel consumption ... between 18mpg and 22mpg (driven in the city) But when I type on google the combined fuel consumption looks totally different (between 41.5mpg and 47mpg) which which is not good at all (the car doesn't seem to have problems and I don't understand why it consumes so much....
Yeh, it sounds a bit bad fuel consumption really. It's a heavy vehicle and driving in city has a higher fuel consumption. First thing I'd do is to clean the MAP and MAF sensors then check the air filter is new or not blocked. Keeping your car serviced is always a good idea and I never belive in the consumption numbers they publish. I have a full service video that shows how to clean those sensors, especially MAP sensor would definitely help.
Need to reset brake pads service , transmission, spark plug service warnings, bypass front fog light checks, reprogram new tpms and car battery. Which one of these programs can do the job ? Ty for talking the question
@@ojtothemax BimmerLink for service jobs. Shame they had to split this programming so we have to buy both. I bought both but returned the other by calling them and they had no issues giving you a refund .
hi! thanks for the vid, but i need your guidance as i'm new to the whole coding stuff. can you please tell me which software i need to be able to do the following stuff to my f25: - check and delete error codes - view DPF state and force regen - code some minor personal stuff like disable auto start/stop completely or code-in a rear view camera if i fit an aftermarket one - update maps - update the version of head unit software - reset the oil/filters service interval if i do them myself - add service entries to the memory of the head unit in case i do some myself really really appreciate it if you can tell me which software i need to buy, because i have no idea which one can do these. thank you !
Hi, thanks for your comment. Helping each other is the only reason I started this channel, so I'll try to keep it as simple as possible for you. -check and delete error codes, view dpf state and force regeneration and some service functions like reseting oil or adaptations you can use Bimmerlink or BimmerTool. They're identical with different user interfaces. I personally use both. You can see my dpf regeneration on this video ruclips.net/video/TbTNjc6FASU/видео.html Updating maps: you have 2 methods, watch my video on how to do it. ruclips.net/video/B2NyZHAypg0/видео.html Update head unit software: for example, if you have iDrive 5 NBT head unit, you can't just upgrade the software to NBT Evo or newer version, because bmw doesn't allow it. Whole head unit hardware need to be replaced which is not recommended since you will lose some functionality due to not matching your car fully. However, there are options like buying an MMI box (like I did) and add many options to your existing head unit. Such as apple car play, android auto, usb video playback, front and rear camera. Watch my video on that ruclips.net/video/dnL7j54m8Gs/видео.html Add Service entries onto iDrive: there's an easy to use software to update your service history on iDrive, if you give me an email here (not personal mail, can be fake) I will send you the software. Also I have a video about it. ruclips.net/video/o4Gw-1JSWt8/видео.html This information should be a good starter for you, as long as you take your time and gain knowledge, it's very easy to do many things on your car without getting tied to dealers and local mechanics. There's also ista+ Rheingold which is a software used by bmw dealers in servicing. This software is at the top of everything and the best you can use for everything in your bmw, but it requires a lot of research and study to understand and use it properly. Watch my video on that. ruclips.net/video/NCPMINNX4rg/видео.html All the best ✌
Protool is more like a combination of bimmercode and bimmerlink and focuses on E series. Bimmercode can only do coding not diagnostics etc. But it works with a wide range of models. So, it's about choosing what suits you the best.
hi man and many appreciations for what you do! a question: With bimmer link can you see the values of the injectors on an e90 320d? thank you and continued success!
Hi mate I finally got the bimmerlink app today full version £33 I don't seem to be getting as meny tabs as you have ie no permanent errors and no memory errors. Maybe am doing something wrong My car is a 2008 bmw e93 320d Thanks pal
Hi, it could be the car model compatibility issue. Have a look at the supported car section in the app. I also can't see some tabs as opposed to 5 series car for ex.
I don't think you can. First you need to scan your car and identify what causes reboot problem. Best option would be to connect to ista, then you'll be able to take action.
Hi, as you said there's a short circuit in the ecu. No software can solve it. It needs to be taken out and repaired if possible or replaced and encoded back in the car.
Ista+ Rheingold states the life span of dpf as 250000km which is around 155342miles at which the dpf needs to be replaced in order to keep the efficiency at a good level. However, you can just take out your dpf, carry out a good chemical cleaning, reset it and continue using the same dpf. (Steven B. Tuner has a few good videos on RUclips)
@@bmwsolutions7880 Ok cool. My X5 is close to 40g of ash at 90k miles. I have been researching on how to perform the cleaning after it hits it's life span. Thank you for your videos!!
Whats the best one for error codes ive a seat belt icon and airbag logo on I need them checked my laptop doesn't work with ista so need one of these whats best to buy as I cant imagine any working and being free
just checking mate, did you manage to clear the airbag and seatbelt one beacause thats exactly what im looking at them for. Ive just replaced an airbag, seat and pretensioner and i need the light off. Cheers.
Check your battery safety terminal wire. Small wire on the positive terminal mine had an issue with seatbelt and airbag light and I replaced it, clear code and done
I would love to but I'm not a mechanic. Most of my Bmw knowledge comes from RUclips and internet forums, so I suggest you do a research on Bmw led light conversion. I'm sure you'll find lots of useful information quickly.
Great video, I use both Bimmer code and Bimmer link. However will get the Bimmer tools
Thank you for all these helpful videos.
Witch one of the 3 is able to reinstal modules and reprogram modules? I have bimercode and i cant reinstal the rear Pdc module for example.. Replaced it for another and cant make it work..
Thank you for this great explanation, but I was wondering if we could use Bimmerlink to change turn signal flash from 3 to 5 with one click, because I will be needing this app to reset new battery, thanks again
Hi Joe ..thanks for your vid ..I like to code my 7 series 2016 do you think I can make my exhaust sound a little sportier ?
Some one said you can code that your exhaust is constantly on sports plus..which is when the exhaust flaps stays opened never closed..
Regards..
M.G.
Thanks for a lively informative video
so, what do you prefer based on feature and functionalities? bimmerlink or btool?
They're pretty much same apart from their themes. I'm used to bimmertool as it came out a few years before bimmerlink.
Which enet cable and usb adapter are you using for this demo?
Great video explaining the differences between the 3 apps. Concerning the DPF, What level of Ash soot would warrant a forced regen and are there dangers associated with forcing a regen with the apps?
Thanks Aaron So the enet cable you have is that Ethernet to USB-C adapter you have?
Thank you
You're welcome, yes ethernet cable to ethernet adaptor (rj45 to usb A) then to usb c adaptor for samsung s10
This is an excellent video to show the 3 applications. The Engine Oil Level displays a number without units. In my case, 255. I have searched the internet for an explanation of what this number means and cannot find one. I apologize for wasting your time if the answer is obvious, but I am at a loss. Is it 255 cl, 2.55 litres or 25.5%?
I’m not a BMW pro but 255 (or FF in Hex) is the highest number available to an unsigned 8-bit integer for a computer. It might represent 100% in the case of the ECU.
Best way to test it would be to drain a little oil during an oil change and then try to see what number appears (though I’d definitely suggest attempting it without running your engine!)
Are the apps for android only or are they available for apple users. Thanks
Hi, I was wondering which app would be better to show additive and multiplicative fuel trim settings as well as Lambda values? I am trying to fix some lean codes so this information would be useful to track, particularly in a graph form.
Hi, as far as I can remember you can see lambda and high/low fuel pressure values in numbers both apps can display it but not as a graph.
When I open my exhaust valve with bimmerlink does it stay that way until I change it and take the obd adapter off?
Yes, it stays open until you change it. You can take off your obd adaptor
To add with his answer, there's an active switch on/off function for memory. Make it active so the settings save and retain
In bimmerlink, I noticed a Parking Brake Service Mode. What does that exactly do for the parking brake? Thank you
That function releases the brake shoes when you want to replace the brake discs. Inside the rear brake drums there are two brake shoes and you need to release them before attempting to hammer your old discs to replace 👍
What if the BimmerLink doesn’t show the brake icon that I’m looking for to change the rear brakes? Is there another way to release or press the piston back?
It shows the function on the application no matter what.
This function is for electronic brake systems without hand lever. You can't take off the brake discs without disabling the parking brakes.
My vehicle turned on the engine fault light with BMW f30 n13 engine. does bimmerlink help
Yes, it would show up the error code and you can take action accordingly. Once you fix it, you can also clear the error codes with bimmerlink.
I will be upgrading the Combox hardware from the 2G to 4G combox. I was told I will need to change the VIN number that's coded in the Combox to my car's VIN number. Will this application allow you to make these changes?
Unfortunately these apps cant help you. The modification you want to carry out requires E-SYS software which needs to be used carefully.
Hello
Thank you for fantastic and informative videos. I wonder if you can help me. I live in Sweden and it is possible to register a car as a tractor to enable 15 year-olds to drive cars up to 30km/h.
I was looking for a way to limit rpm via ecu so the car only can go 30km/h in second gear.
Is there an easy way to accomplish that?
Thank you in advance
Hi,
I'm glad you enjoyed the video 🤠
Bmw has a speed limit warning sound if you enable it. Other option is to use it in manual steptronic gear and keep it on M2, so car doesn't change gear.
Can you explain how I can reach o2 sensor in live data .in bimmer link
Which one should we get for 2001 E46 BMW 3 series, Bimmertool or bimmerlink?
Both apps support BMWs from 2005 onwards, so unfortunately your car won't be working with neither of these apps.
good morning, can you tell me how to find out the real km of a used car using these apps?
bimmer tool air mass expert value 1300 in my car f10 520d
In the video, the air mass expert gapping 1300 is there a problem with the MAF sensor or the oxygen sensor? In what case is this estimate high?
I'm not too sure about exact values of everything really. They always flacuate when engine is running. BimmerTool has some expected values but I never pay attention to be honest.
which app will reset EDC systems?
I don't know what to do, I have a bmw x5 (f15) from 2015 and it has very bad fuel consumption ... between 18mpg and 22mpg (driven in the city) But when I type on google the combined fuel consumption looks totally different (between 41.5mpg and 47mpg) which which is not good at all (the car doesn't seem to have problems and I don't understand why it consumes so much....
Is it petrol or diesel?
@@bmwsolutions7880 Diesel (3.0L)
Yeh, it sounds a bit bad fuel consumption really. It's a heavy vehicle and driving in city has a higher fuel consumption. First thing I'd do is to clean the MAP and MAF sensors then check the air filter is new or not blocked. Keeping your car serviced is always a good idea and I never belive in the consumption numbers they publish. I have a full service video that shows how to clean those sensors, especially MAP sensor would definitely help.
Hi mate great video can I just ask will the bimmer link give me the option to do a forced regen
Hi, thanks 👍 yes it has an option for forced regeneration.
Need to reset brake pads service , transmission, spark plug service warnings, bypass front fog light checks, reprogram new tpms and car battery. Which one of these programs can do the job ? Ty for talking the question
I have to do the same, which one did you get?
@@ojtothemax BimmerLink for service jobs. Shame they had to split this programming so we have to buy both. I bought both but returned the other by calling them and they had no issues giving you a refund .
@@torocars9227 thanks a lot! Will get BimmerLink then.
hi! thanks for the vid, but i need your guidance as i'm new to the whole coding stuff. can you please tell me which software i need to be able to do the following stuff to my f25:
- check and delete error codes
- view DPF state and force regen
- code some minor personal stuff like disable auto start/stop completely or code-in a rear view camera if i fit an aftermarket one
- update maps
- update the version of head unit software
- reset the oil/filters service interval if i do them myself
- add service entries to the memory of the head unit in case i do some myself
really really appreciate it if you can tell me which software i need to buy, because i have no idea which one can do these. thank you !
Hi, thanks for your comment. Helping each other is the only reason I started this channel, so I'll try to keep it as simple as possible for you.
-check and delete error codes, view dpf state and force regeneration and some service functions like reseting oil or adaptations you can use Bimmerlink or BimmerTool. They're identical with different user interfaces. I personally use both. You can see my dpf regeneration on this video ruclips.net/video/TbTNjc6FASU/видео.html
Updating maps: you have 2 methods, watch my video on how to do it. ruclips.net/video/B2NyZHAypg0/видео.html
Update head unit software: for example, if you have iDrive 5 NBT head unit, you can't just upgrade the software to NBT Evo or newer version, because bmw doesn't allow it. Whole head unit hardware need to be replaced which is not recommended since you will lose some functionality due to not matching your car fully. However, there are options like buying an MMI box (like I did) and add many options to your existing head unit. Such as apple car play, android auto, usb video playback, front and rear camera. Watch my video on that ruclips.net/video/dnL7j54m8Gs/видео.html
Add Service entries onto iDrive: there's an easy to use software to update your service history on iDrive, if you give me an email here (not personal mail, can be fake) I will send you the software. Also I have a video about it. ruclips.net/video/o4Gw-1JSWt8/видео.html
This information should be a good starter for you, as long as you take your time and gain knowledge, it's very easy to do many things on your car without getting tied to dealers and local mechanics.
There's also ista+ Rheingold which is a software used by bmw dealers in servicing. This software is at the top of everything and the best you can use for everything in your bmw, but it requires a lot of research and study to understand and use it properly. Watch my video on that. ruclips.net/video/NCPMINNX4rg/видео.html
All the best ✌
BMW Solutions k
Hi mate what ethernet cable would you recommend for bimmerlink and I have a Samsung phone
Thanks joe
Hi, any ethernet to obd2 cable would do, there's no specific brand I can recommend really. I'm on samsung too
Is B tools for android better than bimmer link for ios ? I mean are they the same ?
Sir, I want to ask if Brilink can read the damage to the water pump on the BMW F30
Hi, it can only read faults if the component has a sensor. So, the sensor can read the fault to bimmerlink.
@@bmwsolutions7880 thanks sir for the info 😊
Would bimmer tool be suitable for clearing a 'sos call system malfunction' error? I have replaced the battery and just need to clear the fault.
Yes, it can clear any error codes
I don't think these work for e46. I belive it's only newer bmw correct ?
Your bmw has to have an obd2 port for these apps to work
@@bmwsolutions7880 E46 has obd.... i think
Which one do you prefer. Bimmercode or protool?
Protool is more like a combination of bimmercode and bimmerlink and focuses on E series.
Bimmercode can only do coding not diagnostics etc. But it works with a wide range of models. So, it's about choosing what suits you the best.
hi man and many appreciations for what you do! a question:
With bimmer link can you see the values of the injectors on an e90 320d? thank you and continued success!
Thanks for your comment 👍
I tried it on an E91 and it was showing all injector values.
thanks man for your time. Good luck in everything you do.
@@bmwsolutions7880 👍
Bimmerink does not support the BMW M54 engine!
Hallo Enet cable will it support the old protocol like the K line as k+Dcan
I don't have any idea to be honest. I only had bmw f series.
do I have to pay for both separately for bimmercode and bimmerlink?
If you want both apps, yes you need to pay separately.
Hi mate I finally got the bimmerlink app today full version £33 I don't seem to be getting as meny tabs as you have ie no permanent errors and no memory errors. Maybe am doing something wrong
My car is a 2008 bmw e93 320d
Thanks pal
Hi, it could be the car model compatibility issue. Have a look at the supported car section in the app. I also can't see some tabs as opposed to 5 series car for ex.
@BMW Solutions cheers pal thanks for response I used the dpf request for the first time yesterday I worked really well am very pleased
5:49 is that battery voltage too low
Any voltage below 12.5 is considered low on car batteries.
Would I be able to use BimmerCode etc to rest my I drive or update it as I have the dreaded reboot issue
I don't think you can. First you need to scan your car and identify what causes reboot problem. Best option would be to connect to ista, then you'll be able to take action.
Hi mate will bimmerlink tell me when my last dpf regen was. Thankyou joe
Hi, as far as I can remember it tels you the mileage since the last regen.
Hi so can you not use cable with bimmertool
BimmerTool has released an update last week and I can confirm that it is supporting e-net cable now.
Hi can i resset frm module short circuit for btool expert
Hi, as you said there's a short circuit in the ecu. No software can solve it. It needs to be taken out and repaired if possible or replaced and encoded back in the car.
That bimmer tool the last one you show is that only on android or can i get it on ios ?
Unfortunately, BimmerTool is android only. Bimmerlink is both ios and android 👍
@@bmwsolutions7880 ahhh i see only i wanted to reset my maf i don’t believe you can do that on bimmer link can you
Do all BMW Diesel DPFs have the same life span with ash mass?
Ista+ Rheingold states the life span of dpf as 250000km which is around 155342miles at which the dpf needs to be replaced in order to keep the efficiency at a good level. However, you can just take out your dpf, carry out a good chemical cleaning, reset it and continue using the same dpf. (Steven B. Tuner has a few good videos on RUclips)
@@bmwsolutions7880 Ok cool. My X5 is close to 40g of ash at 90k miles. I have been researching on how to perform the cleaning after it hits it's life span. Thank you for your videos!!
How to download Bimmer tool
Can you update service history with this tool?
No you can't, you need a different software for that. Have a look at my video for service update.
ruclips.net/video/o4Gw-1JSWt8/видео.html
Whats the best one for error codes ive a seat belt icon and airbag logo on I need them checked my laptop doesn't work with ista so need one of these whats best to buy as I cant imagine any working and being free
As I mentioned in the video, they're almost same, so either bimmerlink or bimmertool will do the job
just checking mate, did you manage to clear the airbag and seatbelt one beacause thats exactly what im looking at them for. Ive just replaced an airbag, seat and pretensioner and i need the light off. Cheers.
@@charliecairns2949 I had to change the acsm module and get it coded in
@@kencalvert8647 I've got one to go in, I just wasn't sure whether or not I would need it. What was the process like? Cheers
Check your battery safety terminal wire. Small wire on the positive terminal mine had an issue with seatbelt and airbag light and I replaced it, clear code and done
Bimmer tool isnt free anymore
can i see if the km is real or if anyone tried to give it back? Thank you!
Can you be more specific, which part are you referring to exactly?
@@bmwsolutions7880 if you can check if the miles are real?
Sorry, these apps can't tell that.
@@bmwsolutions7880 Do you have any idea with which application I could see if there are real kilometers?
Unfortunately I couldn't find any software for it. We check MOT test certificate for milage reading in the UK.
My friend could you help me from my f20 headlight
What's wrong with your headlight?
@@bmwsolutions7880 “dipped beam left/right failure” I replaced headlight to led.
I would love to but I'm not a mechanic. Most of my Bmw knowledge comes from RUclips and internet forums, so I suggest you do a research on Bmw led light conversion. I'm sure you'll find lots of useful information quickly.
@@chepocal17 need to change bulb type to LED altho I imagine you've done it now, given this was asked months ago!
subscription free ?????
The same as:
Paid/Free
black/white
full/empty
slow/fast
🤣
You'd understand me perfectly if you used Carly or Carista apps 🥱