Here’s the battery trick- “clean terminals and cable connections with the wire brush then apply dielectric grease to both sides of anti corrosion washers, also apply dielectric grease to both battery post and cable connections. Reconnect with the anti corrosion washers and rub some dielectric grease over that!” Bam! Your batteries will hold up in AZ! Dead batteries is kinda an Arizona thing. Especially during season change. Because it goes straight from hot to cold and then cold to hot.
Hahah I appreciate it brotha .. I love Puddin and he makes me not feel so bad about "talking" too much 🤣 hahaha cuz that boy can TALK!! Hahaha but I love every minute of it
Props for the attention to detail. I wish I had the motivation. Instead of a radio, you should put some gauges to monitor your engine. You can do the Bluetooth radio in the glove box. Or in the center console.
Just a heads up, I used that same harness in my blazer and the battery kept dying, turns out the power circuit for the data link connector (0bd2 port white wire) was spliced in to the tach wiring from the pcm. I separated it and battery hasn’t died since.
I'll check it out. I also noticed while the battery is on the charger that the alternator is humming 🤔 I don't know if that's normal or what but I unplugged it and it stopped.
If I may make a suggestion regarding towards the spray paint cans. Try using a massage gun, if you have one, at the base of the can 👍🏻. Keep up the great content brotha 🤙🏻.
Eliminate the wheel hop by installing Caltrac Bars. If you do make sure you get the Low Profile drag bars because from the looks of it, you have low clearance between the front spring eyelets and the ground. 😉
I'll try it... I found a RUclips video that a guy was talking about having the same problem. And there are some settings in the ECU I believe are still set on automatic transmission. It would explain it but at the same time my engine hasn't always had this rev hang.. It didn't do that when I first got it running so I'd imagine if it was settings in the ECU it would have been like that from the start 🤷♂️
You think yours is old I have an 84 first year they were made I believe I was wondering if you knew where I could find the rubber gromments for the roof rack te reseal it
Here’s the battery trick- “clean terminals and cable connections with the wire brush then apply dielectric grease to both sides of anti corrosion washers, also apply dielectric grease to both battery post and cable connections. Reconnect with the anti corrosion washers and rub some dielectric grease over that!” Bam! Your batteries will hold up in AZ! Dead batteries is kinda an Arizona thing. Especially during season change. Because it goes straight from hot to cold and then cold to hot.
yo Braven has a great dad to show him the value of completing things all the way through. Its looks great🔥
When I was younger I had an 89 S10 with a bench seat. I put in a pair of seats from a mid 80s caviler. It was a bit of fab but they worked out good.
I currently have a 94 s10 that I swapped some Cavalier seats into. Amnin the middle of 5.3 swapping it.
It’s crazy to compare to when you first got it. It’s coming out looking amazing. Keep up the good work Brother. Db family
I appreciate brotha 👊🏻
I miss the Honda content but I fw the Chevy shit too cuhh
SEM Paint for all your Plastic Vinyl Cloth Carpet interior parts Highly recommend it!
Loving all the puddin references. I enjoy both channels even though they're drastically different. Thank you for putting out the great content!
Hahah I appreciate it brotha .. I love Puddin and he makes me not feel so bad about "talking" too much 🤣 hahaha cuz that boy can TALK!! Hahaha but I love every minute of it
It has come along way .. pretty sweat … it’s gonna be a beast when you are done…
Truck is looking good I am working on an 86 s10 extended cab enjoy your videos thanks
Thanks brother I appreciate it. Good luck on your truck!
Gotta say bro , you're killing it with the content lately and the rides are coming out 🔥
The blazer is a whole other car, its come a long way I love it watching y'all fix it up...has definitely inspired me to get mine back up and running.
All projects are projects keep it going
💪🏼💪🏼💪🏼💪🏼
I have been watching for a while
It looks way better than before 👌🏽 I digg it #dbfam
Thanks brotha!
Hell yea progress is looking great in the blazer. Hopefully some seats turn up on one of the future junk yard runs.
not sure how long the outro been like that but its dope the last 30 secs loved it
Yessir some DBgarage. Hope yall doing good guys.
Appreciate it brotha and we're hanging in there. 👊🏻
@@deadbeatgarage np glad it's going good. U got me itching to get out there n work on my bagged ek sedan now that weather's cooling down some.
Trucks keeps getting better and better!! Love that damn hood!! Lol
Props for the attention to detail. I wish I had the motivation. Instead of a radio, you should put some gauges to monitor your engine. You can do the Bluetooth radio in the glove box. Or in the center console.
Looking good for sure
Looks awesome. Nothing but up from this point
We appreciate your channel
I f w the blazer heavy man, all around its a hard machine 👍💪 #dbfam strong 🤙
Bro you're going to have to come up with some sort of solar-powered trickle charger for your batteries
Or maybe fix the problem so he doesn't have to worry about it
Yo Bravus , I heard 4th gen camaro seats fit in the blazer ,maybe the junkyard might have some .
Just a heads up, I used that same harness in my blazer and the battery kept dying, turns out the power circuit for the data link connector (0bd2 port white wire) was spliced in to the tach wiring from the pcm. I separated it and battery hasn’t died since.
I'll check it out. I also noticed while the battery is on the charger that the alternator is humming 🤔 I don't know if that's normal or what but I unplugged it and it stopped.
If I may make a suggestion regarding towards the spray paint cans. Try using a massage gun, if you have one, at the base of the can 👍🏻. Keep up the great content brotha 🤙🏻.
Eliminate the wheel hop by installing Caltrac Bars. If you do make sure you get the Low Profile drag bars because from the looks of it, you have low clearance between the front spring eyelets and the ground. 😉
The badazz blazer is coming along nicely 👌. I’ll go help rebuild the paint booth to get blazer a fresh coat. What color ideas do you have in mind?
Clean
You should be useing fabric and vinyl paint not regular spray paint. Some flex agent and adhesion promotor would help as well.
Bro you should really plug that emissions hose with the green cap I think that is keeping your rpms up
I'll try it... I found a RUclips video that a guy was talking about having the same problem. And there are some settings in the ECU I believe are still set on automatic transmission.
It would explain it but at the same time my engine hasn't always had this rev hang.. It didn't do that when I first got it running so I'd imagine if it was settings in the ECU it would have been like that from the start 🤷♂️
He'll yea bro looking forward to it thanks for the acknowledgement my guy keep it goin
Btw it makes sense cause like a honda d16y8 atleast you can use an auto ecu for a manual swap but you have to desoder some connections inside the ecu
looking good my boy !
Weld up the rear end
Use hose clamps instead of the tape
Love the content what's braven up to with creamy I see there are no headlights
LOOKING GOOD 👍
I like the outtro
We need more HONDA content!!!!!!
Get a 13inch double fin for that truck it flips.
The blazer looking sick 🔥 like your idea with using 🔥 fix alot of stuff I am guessing your definitely a piro 😂
Looking good bud
Hey bro !! Try looking into some solar powered trickle chargers 🔌 ☀️🔥🔥🔥
Beautiful blazer. You say the EP3 is faster than Bravens truck. Is the Blazer faster than Bravens truck
ROCKAUTO has new arm rests for the door panels
DeadBatts 😂🤣
Should of used paint made for vinyl and plastic
What did happen to the 2jz civic. Idk if his name is shilow but did anything ever get done?
Razz we blaze the hairs cheep ones will work
Let’s go
You think yours is old I have an 84 first year they were made I believe I was wondering if you knew where I could find the rubber gromments for the roof rack te reseal it
U need a battery sponsor 🤣🤣🤣🤣🤣
You and the batteries bro ive left a 82 dodge ram sit for 6 months just to turn the key and it turn on like nothing even my mustang for weeks
Why did u use 320 on the door cards instead of 600
It's a big change from old Uncle Frank's blazer to move out the way, hide your kids, and grab your wife cuz DEADBEAT BLAZER is coming through.
Hahaha I agree brotha but nah I collect wives! Put em in the back 🤣😝
Its odd, but semi gloss rustoleum is less shiny than the satin, and has more of what i would call a satin finish.
You really need to swap the wheels and rims bro you ur black ones
✌🏻🇳🇱
get paid