Alex, I am voting for restoration of the Bronco. Surely the wobblematic suspension and slow acceleration can be fixed. It has to do a proper failrace roll
You can disable the zoom in and zoom out when bolting on parts in the settings. It might take some getting used to but it makes things like the rocker arms and valve push rods MUCH easier to work on
I want to see the devs work on a scrapheap challenge type game, basically take their engines and stuff and add the ability to fabricate parts like chassis and grabbers and stuff from drums,pipe, sheet metal and so on.
lucky Massachusetts inspection is not as hard as the UK's (to my understanding) but its rigorous. They punctuate emissions and saftey and some shops are more meticulous than others. Our old 100 series Land Cruiser failed a few years ago because it had a small crack in the windshield. Took it to the local gas station and tada, it got its sticker.
I was driving along Highway 99 in California, USA, and there was one of those Ford Broncos on the road in front of me. After watching it for a bit, I noticed something strange... Every time he changed lanes, the entire vehicle would wobble for 30 seconds or so. Can't imagine what it would be like on the inside...
Rod bearing caps need to be fitted and machined to match the rod. Usually you would just buy new rods with factory matching caps, but it is possible to fit new bearing caps albeit a costly process. In the real world a whole new set of rods (8) for small block ford is around 280ish american pesos.
Get a cheap gaming pc, it would be easy to run as far as i'm aware.. Plus there's plenty of other games on pc that aren't on console that you may enjoy, many of them being free :)
the minimum specs recommended are an i3 at 3.0GHz and a 2GB GTX 660 which would be pretty easy to acquire second hand for less than a new console where i am for the same price as a new console i think you could buy a second hand system with better specs than that.. you just got to shop around until you find the right deal for you
a cheap pc in my eyes consists of like a good i3 or decent i5 and something around the 1050ti level of perfomance.. which by the sounds of it would run this game at low/medium settings..
engine in this game will run without rod caps and 2 pistons at 1%. I had dodge challenger with piston at 1% and no cap started, with missing cap replaced with 10% one and added oil pan it run 230km/h on airport. No piston on this engine is above 25%.
MOT DLC is the only dlc I will willingly buy! someone needs to make it happen just for to soul reason to say "I own the MOT DLC" doesn't matter witch game it is for just... we need to have it only on FR can we get proper DLC ideas, developers need to star watching more FR and less everything else
Allo Mate as we might say twere I in London, or maybe Manchester??? ok,, not to bugger up your idea, nor make your "intent" """wrong""",, but if this were the Cheapest, makeover just for a start up,, wouldn't you go to barns, junkyard etc,, and find the parts, that were """almost good""" and buy them for 1$ and come home and fix them, THEN install them,, I mean ,, the head covers, a head, all V8, some tappets (what I call them),, the starter, etc??? Suppose so? Let me say though, I do adore your vids,, I like your accent for one, and plus the way you work is often a humor and enjoyment... keep it up !! HAGD E
So like I purchase this, right, well I work with it for 5 hours to run on my system, meeting all the req' for system, it does not work, so I ask for a refund, apparntly you only get 2.5 hours, to try to get it to work, so now, not only do I have 19.99 of something that does not work, I cannot get a refund, or they wont give me a refund, sounds like there is some theft going on, to me, I will now make it my lifes venture, even on youtube, till I get the refund, to BLAST the company who makes this.
Alex, I am voting for restoration of the Bronco. Surely the wobblematic suspension and slow acceleration can be fixed. It has to do a proper failrace roll
I actually own a 70s ford bronco and would love for you to restore this!
I almost did,, then found out the tranny was gone before I bought it,,, sad though, I love 4 wheelin!!
You can disable the zoom in and zoom out when bolting on parts in the settings. It might take some getting used to but it makes things like the rocker arms and valve push rods MUCH easier to work on
lol woom
My Name Here shush, you saw nothing
Restore the bronco please Alex!
HMS automotive and the GT40?
Alex's puctuality hasn't been the best recently. He's done a pretty good job though. I don't know any RUclipsr this consistent.
im consistant with my vids 3 a day man
Ryab please dont self advertise
quality over quantity my dude, Alex's videos are always the same high quality
Solomon Tetteh cshfj ttc
Ryab 1 video a week*
Today we fix up OJ's car :D
So cool
I want to see the devs work on a scrapheap challenge type game, basically take their engines and stuff and add the ability to fabricate parts like chassis and grabbers and stuff from drums,pipe, sheet metal and so on.
Anthony Williams That would be an amazing idea but it would either be made not in the right way or not made at all
Please restore the bronco
Mot in Kansas
*Sheriff checks vin* "not stolen, your good"
I'mma be that dude an say you're
lucky Massachusetts inspection is not as hard as the UK's (to my understanding) but its rigorous. They punctuate emissions and saftey and some shops are more meticulous than others. Our old 100 series Land Cruiser failed a few years ago because it had a small crack in the windshield. Took it to the local gas station and tada, it got its sticker.
I think if the car has seats you can try starting the engine and if your lucky it can start up this go’s for barns and junk yard
love how his memory fades from time to time.. it relieves some of us. To know we arent the only ones who forget what they went into a store for lol
I was driving along Highway 99 in California, USA, and there was one of those Ford Broncos on the road in front of me. After watching it for a bit, I noticed something strange... Every time he changed lanes, the entire vehicle would wobble for 30 seconds or so. Can't imagine what it would be like on the inside...
I can imagine Alex in the driver's seat of the Bronco with a wrench on the steering column to turn the car lol XD
I'm a simple man. I see a Bronco, I drop what I'm doing and watch.
next challenge, running car made only with, excluding the body, parts you pulled off job cars
Restore it all the way later.
Rod bearing caps need to be fitted and machined to match the rod. Usually you would just buy new rods with factory matching caps, but it is possible to fit new bearing caps albeit a costly process. In the real world a whole new set of rods (8) for small block ford is around 280ish american pesos.
loving the CMS18 content! :) really happy to see it consistantly on the channel
Do a full restoration of the bronco please
I want this damn game to release to console already!!
Variant That sounds like a bad idea it's already finicky on computer
Get a cheap gaming pc, it would be easy to run as far as i'm aware.. Plus there's plenty of other games on pc that aren't on console that you may enjoy, many of them being free :)
OMGcubes how much is cheap that would run this no worries
the minimum specs recommended are an i3 at 3.0GHz and a 2GB GTX 660 which would be pretty easy to acquire second hand for less than a new console where i am for the same price as a new console i think you could buy a second hand system with better specs than that.. you just got to shop around until you find the right deal for you
a cheap pc in my eyes consists of like a good i3 or decent i5 and something around the 1050ti level of perfomance.. which by the sounds of it would run this game at low/medium settings..
So in trying to build a car as cheaply as possible, Alex has managed to build a jelly Bronco
you could rip off the engine apart and repair parts to condition that it must work, not like all 100% but some repair over 30-40% maybe
With the wobbly suspension i shall call this car the Bucking Bronco!
Says pistons are expensive at $80 per standard one, in CMS15 pre - Performance DLC each standard piston and conrod is $300
You can turn off the fees for going to the barns and junkyard in the settings
Restoring this would be great! It's already 1/4 of the way there, I'd say.
Roadkill or dirt every day?
Witch show would this most likely fit in? I think both
Freiburger: this is mint
Roadkill
Roadkill
Rod bearings should be under $50 for a set, crank bearings are probably about the same cost.
engine in this game will run without rod caps and 2 pistons at 1%. I had dodge challenger with piston at 1% and no cap started, with missing cap replaced with 10% one and added oil pan it run 230km/h on airport. No piston on this engine is above 25%.
That's just lucky
I like the restoration is fully repair the hold car not listen ur own opinion like "this looks like is in good condition,so I will not repair it"
Full resto on the bronco
U missed the muffler barring
Mtb and Stuff and the blinker fluid.
Lol
Well he also needed to re-apply the elbow grease too. That stuff is very important!
Olly King stickers for more horsepower
I came to your channel and I subscribed and liked your videos.
coil unplug it's in ford expeditions are ones that have it
International about 1970 SUV is probably the cheapest and easy to service vehicle I ever saw
MOT DLC is the only dlc I will willingly buy! someone needs to make it happen just for to soul reason to say "I own the MOT DLC" doesn't matter witch game it is for just... we need to have it only on FR can we get proper DLC ideas, developers need to star watching more FR and less everything else
I bought a car from the junkjard all I needed to replace was the battery and driveshaft and it worked for me car cost abaut 16 k
you should redo this with base game cars I tried and got one with just the block and only find that
Wonder how much more it would have been now that they charge to repair.
Allo Mate as we might say twere I in London, or maybe Manchester??? ok,, not to bugger up your idea, nor make your "intent" """wrong""",, but if this were the Cheapest, makeover just for a start up,, wouldn't you go to barns, junkyard etc,, and find the parts, that were """almost good""" and buy them for 1$ and come home and fix them, THEN install them,, I mean ,, the head covers, a head, all V8, some tappets (what I call them),, the starter, etc??? Suppose so? Let me say though, I do adore your vids,, I like your accent for one, and plus the way you work is often a humor and enjoyment... keep it up !! HAGD E
I am pretty sure this is the video game equivalent to roadkill lol
Failrace did you know that you can sit in the car at a junkyard see if it runs fine
Next time fix the Bronco properly.
I like your content. Subbed
Love all ur videos just wondering if u can do a new king of the hill gta as they are so funny thanks
Ok when can you do the two GT40 replicas???
Hang on... you can't buy a bus, can you?
Sadly no. Would make an epic drag build though
I think the steering wheel was $80 because it is from 1980
Wow I just bought a 88 Bronco for real... this game might help a lamo like me identify some parts :D very cool game.
Did it help you
Are you a car guy now
Is there a mod for the Datsun 510
OBMF_N1 NISMO do you watch roadkill? On motor trend? He should make the rotson tho it wouldn't have a turbo coming through the hood
OBMF_N1 NISMO I sure hope there will be, but I'm sure it wouldn't quite be the same parts wise, especially in terms of engine
Datsuns suck try mustangs XD
Not the 510
Anyone instantly remembered Monster Garage game after seeing the Bronco?
Mine was a Mazda mx3 got it to work for $4000
how are you able to restore pistons and such that normally cant be restored.
They should add motorcycles into this
the Wronco :3
FINALY
But what about the blinker fluid?
The alternater just charges the battery
Pleeeeease restore the Bronco!
Diesel cars don't have wires
how did u find that purple car are you using mods?
Can any one point me in the direction of the db5 mod please, I think the guy that released it has taken it down :(
Can someone please leave me the link to the mod that lets you repair everything? thanks
And can you rebuild a Spectre
Lol when I was a noob I somehow made a v8 boot caps run with shit parts it costed around 15k for all the shit
And you can do it a a garage find
Coil unpluges in ford expedition
I cant seem to get my cms working can you help?
When this game will release in ps4 🤔
failrace there is a shelby daytona mod
Please upload your gamesave so we can download it
Yes bronco
This is some roadkill shit
$40 for 8 spark plugs fuck me I paid $110 for 4 of them a few months back
Early squad ASSEMBLE
Perx Armbot here!
I like dhat car on de front
Restore everything apart from motor
I need this game!!!!!
this is so roadkill lmao
Is it a mod???
What year is the bronco
Its the 70's model.
You Nagpur repair a truck from the junk, Plz!!!
So like I purchase this, right, well I work with it for 5 hours to run on my system, meeting all the req' for system, it does not work, so I ask for a refund, apparntly you only get 2.5 hours, to try to get it to work, so now, not only do I have 19.99 of something that does not work, I cannot get a refund, or they wont give me a refund, sounds like there is some theft going on, to me, I will now make it my lifes venture, even on youtube, till I get the refund, to BLAST the company who makes this.
Fishish the bronco
Fishish
2014
no
الي جاي من هكتر الايطالي لايك
i did better i got a car that ran out of the junkyard and i paid $5,645
Op
شوف هكتر الايطالي
Lol
fu
The 100th comment
999th like
😴😴😴😴
And you can do it a a garage find