I am looking at this AIO with my 7800x3d. I have always used air cooling as i am scared of leaks from these aios. I just love the way they look so i am thinking about it
Hello, good video, I'm also thinking about buying the new CPU cooler. Did I understand correctly that only 1 connection is needed for all 3 fans + rgb? With the predecessor, each fan had its own RGB port.
Yes correct. The fans attach to each other via magnets. The last fan on either side will have a connector which will control the RGB and Fans as well. Very neat solution
I want your help that, when i install the aorus waterforce x II 240, just only one of my fans spinning, like the one have aorus LOGO in the middle, when i turn on the computer, it both worked but later on the one i mentioned it stop spinning Im really freaking out right now. Do you have any idea. I did connect anythings like the manual say. I did change the as you said that, plug the ARGB and FAN header directly into motherboard then it worked, but the fans used to didnt spin, it spin little weaker, I guess because I can see the vibration of the center of the fan is more than the other one so i guess it spinned but little weaker. Do you have no I idea what issue I have met or I should go refund it. Thanks you
I have an issue with this pump. When I'm in the bios I notice that after about 4 min the CPU temp goes up to 99c and I start getting warning messages poping up.
That sounds like a faulty unit. That shouldn't be happening. What I was getting is the fans spinning up too much and making a needless noise in bios. However there were no pump issues, I suggest you get it replaced if possible.
@@marcelosalama1860 I'm done with asus after I've send them GPU with defctive fan, and they broke the connetcer and blamed me. plus didnt fix the fan. the card was under warrenty.
@@TheOverclockerMagazine I also conducted a study on software programs, showing that what determines whether the program is good for you or not is the motherboard. I asked a number of people about Armory Create. The people who say that the program does not cause them any problems were using a ROG STRIX motherboard. Also, as for the GIGABYTE CONTROL CENTER, for people who own AORUS motherboards, the program was very smooth with them, but this is not a standard. The program may be very smooth with you, but you do not have the same company of the motherboard
I am looking at this AIO with my 7800x3d. I have always used air cooling as i am scared of leaks from these aios. I just love the way they look so i am thinking about it
they wont leak if you take care of them, also those aorus ones come with multiple protections in the tubes.
What an excellent setup, it'll be similar to the one I daily now.
Hello, good video, I'm also thinking about buying the new CPU cooler.
Did I understand correctly that only 1 connection is needed for all 3 fans + rgb?
With the predecessor, each fan had its own RGB port.
Yes correct. The fans attach to each other via magnets. The last fan on either side will have a connector which will control the RGB and Fans as well. Very neat solution
I want your help that, when i install the aorus waterforce x II 240, just only one of my fans spinning, like the one have aorus LOGO in the middle, when i turn on the computer, it both worked but later on the one i mentioned it stop spinning Im really freaking out right now. Do you have any idea. I did connect anythings like the manual say.
I did change the as you said that, plug the ARGB and FAN header directly into motherboard then it worked, but the fans used to didnt spin, it spin little weaker, I guess because I can see the vibration of the center of the fan is more than the other one so i guess it spinned but little weaker. Do you have no I idea what issue I have met or I should go refund it. Thanks you
Not sure what it could be, but I would get a refund or exchange. That unit sounds like it is faulty
I have an issue with this pump. When I'm in the bios I notice that after about 4 min the CPU temp goes up to 99c and I start getting warning messages poping up.
That sounds like a faulty unit. That shouldn't be happening. What I was getting is the fans spinning up too much and making a needless noise in bios. However there were no pump issues, I suggest you get it replaced if possible.
Can you tell me if the thermal paste that comes with it conducts electricity?
It's not conductive at all
what oem pump this using it? asetek or another?
Have no idea, GIGABYTE would not volunteer that information
Hello, could measure the tube length on these please? Can't find it anywhere :-(
About 37cm each
@@TheOverclockerMagazine Thanks a lot for your answer!
Have you had any problems with it? I’ve read that people compin about pump problems
Zero thus far. What pump problems are they complaining about? Perhaps I'm unaware that I have such an issue. Would be curious to find out.
probably just people not knowing how to position AIO's correctly. the pump should never be higher up than the block
this is trash bro take and asus its so much better
@@marcelosalama1860 I'm done with asus after I've send them GPU with defctive fan, and they broke the connetcer and blamed me. plus didnt fix the fan. the card was under warrenty.
After 3 months i can safely say, it's one of the best aio's
Still 7th Gen Asetek pump??
Don't know, will try and find out.
What happened to the 7th gen Asetek pump?
did the software make proplems?
Not at all surprisingly enough. The GIGABYTYE Control Centre works surprisingly well
@@TheOverclockerMagazine truly? Many people say that it is a bad program, it seems that it downloads programs without your permission
@@TheOverclockerMagazine Also, many people say that ARMORY CREATE is one of the worst programs. Companies should pay attention to software programs.
@@TheOverclockerMagazine I also conducted a study on software programs, showing that what determines whether the program is good for you or not is the motherboard. I asked a number of people about Armory Create. The people who say that the program does not cause them any problems were using a ROG STRIX motherboard. Also, as for the GIGABYTE CONTROL CENTER, for people who own AORUS motherboards, the program was very smooth with them, but this is not a standard. The program may be very smooth with you, but you do not have the same company of the motherboard
@@TheOverclockerMagazine I WILL GO WITH ASUS ROG STRIX RYUJIN III 240 ARGB IT IS CHEAP , IT IS cost 220$
It's pure garbage, I had an x360 aorus and the screen kept failing, always problems, and the forums you review all have the same thing happen
That's unfortunate. I didn't have that issue on the 1st model and not this one.
no more aorus AIO
Why?