Just fixed the Led bulb using the nail method. Works!!😀Using the nail to scratch that area bridges those 2 metal points together. Thank you. Genius idea.
Those are indeed clever ways to complete the circuit but it seems like a quick momentary touch of a hot soldering iron to reflow the joint would provide a more permanent and durable fix.
Thank you for a helpful and interesting video. Why wouldn't a small drop of solder work? I must admit I do not understand how the last example with the nail works. Cheers
That was my thought and I see down below someone tried it and it work.. now I can't wait for mine to stop working.. might be bugging my neighbors lol=))
Excelente, obrigado. Nunca jogue fora sua lâmpada de led!! ? Consertei 3 aqui fazendo como no primeiro exemplo com grafite. Outra ficava piscando mesmo desligada, não era os leds, essa foi só abrir e apertar melhor um parafuso central e dois 'ganchos' e ficou perfeita de novo.
Лампу легко отремонтировать, и диод поменять, а не заколотить. Но не имеет смысла, после ремонта лампа работает не долго, остальные диоды(а они работают в тяжёлом режиме по температуре) так же начнут по очереди выходить из строя. Разве что поменять все на новые. Сама схема выходит из строя черезвычайно редко
Hola Invention 75! Lo mejor es una gota de soldadura para alargar un poco más la vida útil de la lámpara... Un saludo!🐤
6 месяцев назад+3
Pensaba lo mismo pero se vuelve a fundir por exceso de voltage, es necesario volverle a soldar leds nuevos o un condesador que reduzca la carga si queremos que dure
@@Invention75 Since carbon is not a very good conductor of electricity, I thought it might heat up and get oxidised. Then it might not conduct. Hence my question. That's all.
Bonjour, Merci pour votre vidéo. Grâce à vous, j’ai pu réaliser la répartition d’un néon led de garage. Et éviter d’en racheter un neuf. Bonne continuation
Sarebbe utilissimo sostituire anche il resistore che regola la potenza di alimentazione dei leds, con uno con valore omico più alto di un 10% circa, per evitare che i rimanenti leds, andando in sovralimentazione si brucino a loro volta a mano a mano...
The idea is to close the cut circuit. If you can solder it, it would last for sure. The pencil method would last very shortly for sure, the foil can last longer, but you need to stick it firmly which would be difficult and once the bulb heats up, the sticker glue would melt and fall.
Si vous voulez vous suicider, c'est la bonne méthode...tout cela pour économiser 1 ou 2 $ pour une nouvelle ampoule......(Traduction Google)If you want to commit suicide, this is the way to go...all to save $1 or $2 for a new light bulb......
It’s not recommend that you use wire without insulator. Since it’s an LED, I don’t think the energy coming through it would be enough to kill you, but you’ll regret it.
Bóng leo khi cắm điện? Nó chỉ sáng 3 con lét còn tất cả. Các con khác kg sáng, cũng kg có chấm đen thấy nó bình thường nhưng kg sáng sửa cách nào nhờ bạn chỉ giúp xin cảm ơn bạn
now do a vid fixing the blinking ones. ? a constant blink. its not a faulty diode. the electrolytic capasitor/ capasitor's have NO swelling or signs of leaking. the main line comeing from the metal center button is intact. the capasitor is mounted on a seperate PCB that hangs from the bottom of the primary PCB , the solder jointsvthere are intact. the 3 resistors look ok. no blacked area on the 8 SMD LED's, so that leaves, what i think is a voltage regulator, black rectangle chip with 2 solder legs on one edge & one solder leg on opposite side. and i dont have any idea what the black square chip is, it has 4 solder legs, near each corner. and lets not forget maybe a faulty PCB , although all the tracers look ok.
Alüminyum folyo vardı elimde dört tanesi bozulmuştu denedim ve iki tane daha bozuldu..onlarida aynı sekilde yaptım yine iki tane daha bozuldu..nerede hata yapmış olabilirim
Just fixed the Led bulb using the nail method. Works!!😀Using the nail to scratch that area bridges those 2 metal points together. Thank you. Genius idea.
I had to comment to just say yours is the only logical and easiest solution. Thanks!!
Your recycling has opened my eyes to new heights of creativity.
Practico, rapido, sin presentaciones que sobran. Grande Brodi
Those are indeed clever ways to complete the circuit but it seems like a quick momentary touch of a hot soldering iron to reflow the joint would provide a more permanent and durable fix.
Ready 👍🥰
Thank you for a helpful and interesting video. Why wouldn't a small drop of solder work? I must admit I do not understand how the last example with the nail works. Cheers
That was my thought and I see down below someone tried it and it work.. now I can't wait for mine to stop working.. might be bugging my neighbors lol=))
Excelente, obrigado. Nunca jogue fora sua lâmpada de led!! ? Consertei 3 aqui fazendo como no primeiro exemplo com grafite. Outra ficava piscando mesmo desligada, não era os leds, essa foi só abrir e apertar melhor um parafuso central e dois 'ganchos' e ficou perfeita de novo.
Ini baru tutorial yg tanpa tipu²semoga rejekinya lancar mas❤
Thanks you ☺🥰🥰🥰
I really like your way to fix LED bulbs, very interesting and useful
Thanks you ☺🥰🥰
drop of solder fixed it. BIG THANK YOU!!!!!!!!!!!!!!!!!!!!!!!
👍😁🥰🥰
Genio!!! Recuperamos 4 lámparas con lo del papel metalizado y la cinta de aislar 👏👏👏👏👏
🥰🥰🥰
no te queda con una iluminacion muy baja?
Thank you my brother it worked on the first try
Лампу легко отремонтировать, и диод поменять, а не заколотить. Но не имеет смысла, после ремонта лампа работает не долго, остальные диоды(а они работают в тяжёлом режиме по температуре) так же начнут по очереди выходить из строя. Разве что поменять все на новые. Сама схема выходит из строя черезвычайно редко
That's better, this can be used at night when you don't have time to buy a new one
@@Invention75 ну да разве что аварийно, ночью, пока магазины откроются
а чё неисправность только всегда диоды ?, другого ничего не бывает ?, я все диоды позамыкáл - никакой реакции
@@user-vb3bp4xw1q мог выйти не один, а два или три допустим, тогда поочередно замыкание ничего не даст, может схема, так не глядя не сказать
Fantastic, very clever, thank you so much. The new light bulbs are very expensive and last for 5 minutes.
This method doesn't last long ☺☺☺
Terimakasih Banyak tutorial nya ,bahan2 sederhana yang di ajarkan menyelamatkan lampu2 saya yang telah mati ❤️❤️❤️
☺☺☺
Hola Invention 75!
Lo mejor es una gota de soldadura para alargar un poco más la vida útil de la lámpara...
Un saludo!🐤
Pensaba lo mismo pero se vuelve a fundir por exceso de voltage, es necesario volverle a soldar leds nuevos o un condesador que reduzca la carga si queremos que dure
Okay thanks you 😊😊🥰
Using carbon between the LED leads is a brilliant idea. Wonder how long it will last, though.
doesn't last long, only temporarily at night 🥰
@@Invention75 Since carbon is not a very good conductor of electricity, I thought it might heat up and get oxidised. Then it might not conduct. Hence my question. That's all.
🎉t😊
I saved a broken light bulb today, thanks to you. And with a pencil: thank you:😀
😁🥰🥰🥰
Thank you. Just fixed a LED lamp. I used solder instead.
I like this tutorial without naration... good
Bonjour,
Merci pour votre vidéo.
Grâce à vous, j’ai pu réaliser la répartition d’un néon led de garage.
Et éviter d’en racheter un neuf.
Bonne continuation
Sarebbe utilissimo sostituire anche il resistore che regola la potenza di alimentazione dei leds, con uno con valore omico più alto di un 10% circa, per evitare che i rimanenti leds, andando in sovralimentazione si brucino a loro volta a mano a mano...
Did two light bulbs. Used both the foil and pencil method. Both worked great for 3 seconds and then went dim, very dim. Not sure what I did wrong.
try the third method 🥰
The idea is to close the cut circuit. If you can solder it, it would last for sure. The pencil method would last very shortly for sure, the foil can last longer, but you need to stick it firmly which would be difficult and once the bulb heats up, the sticker glue would melt and fall.
electrical work is very good But it is also very dangerous ❤your video is good
You are absolutely right, safety first! 😊
Круто! Особенно с гвоздем. Спасибо!
😁😊🥰🥰🥰
Very creative and great idea! Thank you for life
🥰😁😊😊😊
O serviço só fica com garantia se colocar outro LED no lugar do outro pois na falta a corrente sobe então vem a queima da lâmpada.
Magaling.... Technique is good thanks....
😁🥰🥰🥰
THANK you for sharing sir❤
A pencil? What?! I didn't know they could conduct electricity!
Also with the nail, were you just rubbing it off onto the contacts?
Dengan berkurangnya led,maka led yg lain akan lebih cepat putus boss
What if the two or more small bulbs have the problem not working
Awesome, usefull👍 Thanks for your sharing.
🥰🥰🥰
By using a pencil and aluminum foil, can it last a long time and not make the LED go all out
What dud you do on number three?
Add touch solder that fix it forever
I do not have an exposed wire to help me figure out which LED light is messing up the flow. Can I use a paperclip or will i get electrocuted and die?
Si vous voulez vous suicider, c'est la bonne méthode...tout cela pour économiser 1 ou 2 $ pour une nouvelle ampoule......(Traduction Google)If you want to commit suicide, this is the way to go...all to save $1 or $2 for a new light bulb......
If you want to commit suicide, this is the way to go...all to save $1 or $2 for a new light bulb......
It’s not recommend that you use wire without insulator. Since it’s an LED, I don’t think the energy coming through it would be enough to kill you, but you’ll regret it.
Hi please can I use a live cable for testing the LED's
Gracias por compartir saludos de mendoza argentina
خیلی جالب ه/ممنون از شما ممنون از لطف شما ممنون از زحمات شما/ 🙏🙏🙏🙏🪴🌿💐🌹🌺🌺🌺
Thanks you 🥰☺☺☺
🇰🇷❤❤❤
A hibás LED helyére hibátlan LED beforrasztása jobb megoldás, például másik rossz lámpából üzemképes LED felhasználása.
Where would I get a bit of wire to do this?
Genius Thanks for the video.
Thanks you 🥰🥰🥰
Bóng leo khi cắm điện? Nó chỉ sáng 3 con lét còn tất cả. Các con khác kg sáng, cũng kg có chấm đen thấy nó bình thường nhưng kg sáng sửa cách nào nhờ bạn chỉ giúp xin cảm ơn bạn
now do a vid fixing the blinking ones. ?
a constant blink. its not a faulty diode. the electrolytic capasitor/ capasitor's have NO swelling or signs of leaking. the main line comeing from the metal center button is intact. the capasitor is mounted on a seperate PCB that hangs from the bottom of the primary PCB , the solder jointsvthere are intact. the 3 resistors look ok. no blacked area on the 8 SMD LED's, so that leaves, what i think is a voltage regulator, black rectangle chip with 2 solder legs on one edge & one solder leg on opposite side. and i dont have any idea what the black square chip is, it has 4 solder legs, near each corner. and lets not forget maybe a faulty PCB , although all the tracers look ok.
good ideas but the soldering will be a good to fix it
👍🥰☺☺☺
Nice..!!! Am reparat unul. Deja... Suuuper!!
☺🥰🥰🥰
hello, can you tell me how to open the cover of a GU 10-5W bulb?
just cut with sharp knive around bulb to cut glue
Thanks for letting us doing good things
🙏🥰😊😊😊
Bravo c'est fantastique merci
Respect the time and effort you put into these videos! 👍
Thanks you 😁☺☺☺
Yeah mam
Thank you,,, very useful,,
🥰🥰🥰
Obrigado por tão grande ajuda . 🇧🇷🇧🇷😁
☺🥰🥰🥰
Vu noHector@@Invention75
Can we buy led bulb in electronic shop?
Can 😊🥰
And where can I find that outlet you have so I can try it? Or do we have to hang from the ceiling?
Hi, how to open the glass without breaking it ?
For glass, it might be a little difficult, I once tried to open it but it broke
This is not glass, it's plastic. Use thin/ sharp knife and put it between the "glass" and the hard plastic, then start "cutting" and prying.
Very good bro❤
Thanks you 🥰🥰🥰
good lad,,i enjoyed that,,from ecosse...
☺☺☺
Thank you.
😊🥰🥰🥰
Dengan cara itu bisa bertahan berapa lama pak
uncertain ☺☺
Do you mean that only one bulb is
Affected?
Muy bueno , gracias, me fue muy útil 👍
🥰🥰🥰😘
Very good way of teaching
😃😁☺🥰🥰🥰
C'est une méthode parfaite, je l'ai expérimenté.
فخامة ❤
5:07 good I like
gracias por compartir tus conosimientos
😁😊🥰🥰🥰
thank you
👍🥰🥰🥰
coba mas bikin konten klo 2 lampu yang kecil nya mati gimana caranya biar bisa awet
How about round 1? I have issued with led ceiling panel light round
🤔🤔🤔
Put a drop or 2 of superglue on the pencil carbon, might last longer
Blub 2kakata vadiya pichchila thibunorh khomada hadanne?
¡¡Lo mejor¡¡ gracias
You're welcome! 😉
Soldering the pads together would be a much more reliable repair
☺☺☺👍
واذا العطل ما من الكبسات كيف نفحص ريزيستانسات
Gracias 😊
🥰🥰🥰😘
I did this. It worked. However, it only worked for 1 day only . I believe this is a very short temporary solution until I buy a new one.
Aman dan tahan lama ga?
This is only temporary ☺
saya pernah coba tdk tahan lama dirumah banyak sdh saya buang
Alüminyum folyo vardı elimde dört tanesi bozulmuştu denedim ve iki tane daha bozuldu..onlarida aynı sekilde yaptım yine iki tane daha bozuldu..nerede hata yapmış olabilirim
Maybe your lamp has dc current, this method is temporarily not very durable.
Teşekkür ederim 😊
Cek pake solder juga bisa
me parece que esas lamparas deberian iluminar mas y el contacto termina siendo muy debil ...
Excellent
😊🥰🥰🥰
Two line how to repair?
posisi kontak on.. nyetrum ga di tes pake kabel
cables that have insulation are not a problem
အကုန်လင်းနေတယ် ဘယ်လို လုပ်မလဲ
as per the video
Di selder langsung bisa gk bang
Parabéns Invention 75
Att: Weliton Marks - Canal Desbravatube
☺☺☺
bị dứt 2 con led trở lên thì làm sao thử được
usually there are black dots 🥰🥰
I know that product, Saving bulb was assembled in thailand by china factory
👍😁😊😊
Good 💡
Thanks you ☺🥰🥰🥰
스위치까지달려있는데 어짜서 여기빼고 저기빼고할까 그냥 스위치만꺼놓고하면될것을,,,
Thanx its working
☺🥰🥰🥰
Multiple LEDs not working how do we know?
Most times, the bad ones will have black spots on them
I've tried this but it didn't work out.
شكرا جزيلا ليك
🥰🥰🥰
တို့လိုက်ရင်အကုန်လင်းတယ် ဘယ်လိုလုပ်ရမလဲ
Muy duro el maestro
1. Tres genial!
Thanks you freand 🥰🥰🥰
Thanks
awesome
Thanks you 🥰🥰🥰