Thanks for this Sam i have this problem in a victorian 2 storey house in the ground floor backroom. The crumbling chimeny pot flaunching needed re-instating as part of log burner install, after completed I still got yellow stains on chimeny breast walls, they came through zinser stain block, i couldnt work out how, thought it must be years of water ingress through flaunching, making its way down the chimney, but as you explained on one of your vides that is highly highly improbable, so Sulphate salts are the explanation that actualy makes sense. Top chap ;-)
Nice one, Sam. You’ve just saved me a small fortune and a load of mess! Just looked on their website and the Flex Membrane is out of stock. You don’t have any off cuts I could buy off you do you? I only need about a two metre length to do the chimney breast in my daughters attic bedroom and I only live in Stairfoot so I could come and collect it if you have any spare. Cheers!
Thanks for this Sam i have this problem in a victorian 2 storey house in the ground floor backroom. The crumbling chimeny pot flaunching needed re-instating as part of log burner install, after completed I still got yellow stains on chimeny breast walls, they came through zinser stain block, i couldnt work out how, thought it must be years of water ingress through flaunching, making its way down the chimney, but as you explained on one of your vides that is highly highly improbable, so Sulphate salts are the explanation that actualy makes sense. Top chap ;-)
Glad you got some value 👍
Nice one, Sam. You’ve just saved me a small fortune and a load of mess! Just looked on their website and the Flex Membrane is out of stock. You don’t have any off cuts I could buy off you do you? I only need about a two metre length to do the chimney breast in my daughters attic bedroom and I only live in Stairfoot so I could come and collect it if you have any spare.
Cheers!
Iv got 2m2 yes but no spare adhesive
very good work sam !
Did you use Roger from Skill builder lick test to prove its Sulphate Salts?
Not on this job
Very interesting thanks!😊
Hi Sam what anti mold paint would you recommend?
All manufacturers do there own, try crown or lay land
Cheers Sam appreciate your response
Not bad
£160 for a roll? That's a bit rough
It’s more than that now
@@dampsam you ever tried a thin tanking slurry and then skim? Just thinking
What a bodgy way of sorting a problem by covering it up
You haven’t a clue lad stick to patching 🤡