Thanks for a good tip. Very helpful for me. You are a high technique instructor. Your channel receive attention less than it's true value. Your channel are mine of gold, full of high quality contents.
For corners, you can follow my other tutorial here to make them look good: ruclips.net/video/6WBlHGGMjzs/видео.html In your case, you'll have 2 straight walls and 1 curved wall in between. That creates 2 corners to clean up using the trick above.
Hi, it's the same as adding doors to a straight curtain wall. Simply select a curtain panel, unpin it, and then replace it with a door. You obviously need to have the door loaded first.
many many time I try thee same your tutorial but not get yet, sir you create the mullion same the glass wall right then how to show in the mullion category, bcz i create the same wich u did but that mullion not show in the mullion categary mullion show wall properties wall panel
@@RVBoost yes sir but u select the mullion the uncheked then dropdown the mullion categary and select the new new mullion which you convert simple wall to mullion i do the same but not showing i follow you same to same 😭
@@sohail3360 It was still a wall. I simply renamed it to be "mullion", but it's not of the curtain wall mullion category. The renaming part was showed in the video.
This method is great but I can't seem to edit the mullion spacing well for some reason when I try to add segments after removing them all it revert back to making straight panels...
@@RVBoost Thanks for the quick response I started again from the curtain wall that doesn't come with mulions or curtain grid (not the storefront or the one above it) and I made the grids from there. I am still a beginner and again thank you for the video :).
Glad you liked it 😊 For a curved roof, you'll need to use massing and pattern-based curtain panels. I have some other tutorials on this channel on that too.
When you've activated the Curtain Grid Line tool, there'll be a button on the ribbon for switching to "1 segment" mode. Click that and then click where you want to place the grid :)
hi i have one problem. i create a wall and then i replace the wall with the storefront as you did. Then i do the glass panel trick that you did and it replaces my panels successfully and it makes them curved. But i have a problem with the horizontal mullions. I delete them as you do, and press the curtain grid button. But when i place the horizontal grid it adds automatically mullion and not just a line grid. what am i doing wrong?
Hi, it sounds like the curtain wall type has a setting for automatically adding millions. To stop this, select the wall, go to Type Properties, then select None for all horizontal and vertical grid lines.
hi, this is a great video! I've been searching for this tutorial and glad that you made a video about this. However, I faced a problem, idk how but i couldn't easily select the small glass panel after i did the 50mm grid, hope you can help. Thank you!
Glad it was helpful! About the glass panels, they do become harder to select if they're small. You can try zooming in, hover your cursor over a panel and press Tab repeatedly until it highlights, at which point you can click to select it. You can also then right click the selected panel and select all other ones on the same row with it using Select Panel > Along Vertical/Horizontal Grid.
That wall trick is awesome. Your knowledge of the specific nature of Revit turns you into a genius.
Glad you like this trick! 😍
Great work. Its harder than it show but manage to get the instructions and result correctly. Thanks. God bless.
Glad you liked it! 😁
Thanks for a good tip. Very helpful for me. You are a high technique instructor. Your channel receive attention less than it's true value. Your channel are mine of gold, full of high quality contents.
Thanks Kahn, I'll keep posting then! If you can, please help my channel by sharing videos with your friends 😊
God bless you,man! Brilliant idea.
Glad you liked it 😁
thanks for the video, very easy to follow instructions : - )
Glad I could help 😊
Very helpful video, thank you!!
Glad you liked it :)
Exactly what i needed
Glad you liked it ☺️
Love your tricks.
Thanks! Love your comment ;)
Very nice sir, thanks so much!
Glad you liked it 😁
This works! Thank you
Glad I could help!! :)
Awesome Tip .. thank you so much .when we fillet with two curtain walls .. how to manage corner kindly share your tips ..
For corners, you can follow my other tutorial here to make them look good: ruclips.net/video/6WBlHGGMjzs/видео.html
In your case, you'll have 2 straight walls and 1 curved wall in between. That creates 2 corners to clean up using the trick above.
Why I can't select the properties at 7:27?
What's the property name?
Hello there, I wonder if you could show us how to add curtain wall door on curved glazing wall please
Hi, it's the same as adding doors to a straight curtain wall. Simply select a curtain panel, unpin it, and then replace it with a door. You obviously need to have the door loaded first.
@@RVBoost Yes but the door is not straight
You'll need to make a curved door family :)
I got it. Thank you very much. Finally it worked
Can you please tell me how to create place curtain wall door on curved wall?
Thank you for sharing!!
Glad you liked it!
many many time I try thee same your tutorial but not get yet, sir you create the mullion same the glass wall right
then how to show in the mullion category, bcz i create the same wich u did but that mullion not show in the mullion categary mullion show wall properties wall panel
They will be "wall panels". Revit can't have curved millions unfortunately.
@@RVBoost yes sir but u select the mullion the uncheked then dropdown the mullion categary and select the new new mullion which you convert simple wall to mullion i do the same but not showing i follow you same to same 😭
@@sohail3360 It was still a wall. I simply renamed it to be "mullion", but it's not of the curtain wall mullion category. The renaming part was showed in the video.
This is good but I can't select the panel 5:10. Anyone has the same issue? Otherwise everything is great. Thank you
You need to press tab a few times until the panel is highlighted, then click to select it 😊
@@RVBoost I did but it selected the whole panel:(
how about the fabrication? the transom still will be straight?
Some more expensive ones can be curved 😉
Would it be possible to achieve this bending around a horizontal axis instead of a vertical axis as shown by you here?
Yes, but you'll need to use conceptual massing for that. I have several tutorials on that on this channel. Curtain wall isn't that powerful :)
Help full video
Glad you liked it!
thank you!
You're welcome!
Hi, nice one! But how did the panels become curved just by reducing it’s thickness?
Well I just used all the steps I showed in this video!
make a custom wall type and then change the panel in the curtain wall setting.. just like in the vid :)
This method is great but I can't seem to edit the mullion spacing well for some reason when I try to add segments after removing them all it revert back to making straight panels...
Probably check your curtain wall's type properties. You can try disabling layout rules in there to always add all grid lines manually.
@@RVBoost Thanks for the quick response I started again from the curtain wall that doesn't come with mulions or curtain grid (not the storefront or the one above it) and I made the grids from there. I am still a beginner and again thank you for the video :).
So it's working now? Great! Glad I could help 😊
great idea...
Glad you think so!
Thank you so much!!!
Glad you liked the channel!
Nice trick 👍 thankyou for sharing!
Glad you liked it!
How to change the angle of mullions in a curved curtain wall.? it's not working as like in a rectangular curtain wall. Is there any method?
This method won't let you change the mullion profile's angle. To do this, have a look at other videos I did on conceptual mass modelling :)
Hi! great tutorial and solution! Do you have any ideas on how to do it if I need it for a curved roof for example?
Glad you liked it 😊 For a curved roof, you'll need to use massing and pattern-based curtain panels. I have some other tutorials on this channel on that too.
AMAZING
Thanks!
Whenever I make the curtain grids, full mullions appear, as opposed to just the lines that you have. How can I get just the lines?
When you've activated the Curtain Grid Line tool, there'll be a button on the ribbon for switching to "1 segment" mode. Click that and then click where you want to place the grid :)
hi i have one problem. i create a wall and then i replace the wall with the storefront as you did. Then i do the glass panel trick that you did and it replaces my panels successfully and it makes them curved. But i have a problem with the horizontal mullions. I delete them as you do, and press the curtain grid button. But when i place the horizontal grid it adds automatically mullion and not just a line grid. what am i doing wrong?
Hi, it sounds like the curtain wall type has a setting for automatically adding millions. To stop this, select the wall, go to Type Properties, then select None for all horizontal and vertical grid lines.
Thank you so much for your answer! It worked! Great video
No worries. Glad you liked it :)
when i try to add the curtain grid it won't let me add a horizontal one, only vertical? Great video thanks for sharing
okay never mind i hovered over the vertical line and it let me do it
Great! Well done :)
@@RVBoost you are more helpful than my tutor 😂
Just trying to be the Revit tutor I never had! :-)
hi, this is a great video! I've been searching for this tutorial and glad that you made a video about this. However, I faced a problem, idk how but i couldn't easily select the small glass panel after i did the 50mm grid, hope you can help. Thank you!
Glad it was helpful! About the glass panels, they do become harder to select if they're small. You can try zooming in, hover your cursor over a panel and press Tab repeatedly until it highlights, at which point you can click to select it. You can also then right click the selected panel and select all other ones on the same row with it using Select Panel > Along Vertical/Horizontal Grid.
sir you dont slove my problem . plz answer
Hi, what problem do you have?
@@RVBoost i will snd u pic
mulion not work . u have instagram
In which way did your millions not work?
@@RVBoost same flow u
some thing u hide on this turorial
he actually make curved mullions from the panel (just like the glass) not the mullion itself.