6. CAD | Problem#1 | Absolute, Relative and Polar Coordinate System

[@emmanuelkisson3102]

Thanks a lot Sir. In spite of the language barrier, I understood every explanation you gave. Kudos!

[@goodluckcollins6492]

Thanks very much well understood... I have my Engineering CAD exam Now...pray for me to pass paper,,🇰🇪🇰🇪

[@RanuShrii]

Had u passed this one senior? 😢

[@anshumanpandey5592]

Back lagi h kal paper Dena hai🥲​@@RanuShrii

[@cedricearlgarcia1563]

I understood what you were teaching despite not knowing what you are saying. Thank you very mu :-)

[@ashbowmusa7512]

Great instructor.
I don't know what language he used but learned the lesson clearly.
would've done best if he had explained the Relative C.S straight from the drawing rather than using the list from the ACS, moreover instead of repeating the sentence " Specify the next point" he could've used
" Starting Point = (X,Y)
Pt 2:
Pt 3:
Pt 4:
Etc...
just to save space, time and add simplicity.
AT the end instead of saying "thank you for watching this video it feels more nice to me to just say " thanks for watching" without (this video) you may cheer little bit while saying that and trust me it will to add a nice closing and leaves positive impression.
thanks again and keep up the great job

[@ghconstructioncompany2562]

thank you sir aapne toh saara load hi clear kardiya thank you.......................

[@harekrishnayadav1131]

Aap padhai hme sabse axaa laga aise hi aap padhaiye hme bahut pasand para sir ...thank u

[@prashanthkumar8648]

And please say separately. Because If they ask only find out relative co-ordinate method then we have to depend on the absolute co-ordinate method. If we write by mistake wrong value of absolute co-ordinate method so total will be going as wrong🤔. The video is superb sir 👏🤗

[@ashbowmusa7512]

great instructor, I don't know what language he used but learned the lesson clearly.
Totally agree! he would've done best if he had explained the Relative C.S straight from the drawing rather than using the list from the ACS, moreover instead of repeating the sentence " Specify the next point" he could've used
" Starting Point = (X,Y)
Pt 2:
Pt 3:
Pt 4:
Etc...
just to save space, time and add simplicity.
AT the end instead of saying "thank you for watching this video" it feels more nice to me to just say " thanks for watching" out this you may cheer little bit while saying that to add a nice closing with
thanks again and keep up the great work.

[@suluymallikarjuna2354]

Thank you sir , your teaching way is so clearly

[@ayushtiwari2830]

best sir .....skills jbrjst ba sir ji .love from bihar .thanku

[@ManojKumarSahoo]

Good luck brother

[@akashpatil5534]

Proper explanation 👌👌👌👌👌👌

[@shariffibrahim3168]

Thnks bro u made it easy for me. May God bless u with more knowledge and wisdom

[@ManojKumarSahoo]

Good luck sis

[@gurlal44]

Salute sirr love from Punjab

[@ashiqquehossain1075]

Unbelievable video..... thanks

[@phanikartheekanne7890]

Easy2 understand...

[@ashishparmar5009]

Very good quality

[@prmaisuriya2046]

Very very very nice video.....
Thank u sir.....

[@krisharora7777]

Thankyou so much sir
Sir kll mera final paper h "engineering drawing" ka or yh question pkka 8 marks mein aana h , merko aata to tha but main bhul gya tha bilkul bhi yaad nhi tha or aapko ptta h abhi main yh vedio raat kr 12 bjhe yaniki paper se 9:30 ghnte phle dekh rha hu ,Aapne smjha diya abh koi tension nhi h sir
Thankyou sir ❤️🙏🙏

[@gplgamer9838]

Thx sir very helpful

[@shubhamk4975]

Kya baat hai sir

[@roshankumarverma9025]

Bahut badiya sir....

[@laxmanthakurbadahi4720]

Thank you sir,this video is very helpful for me.

[@divineblessings1176]

Thanq sir for this great lecture series....🙏🙏🙏

[@agamer7927]

Tnnku so much sir..😘😘

[@rajamadhukar2573]

Bhai or problems bnana chahiye tha yr apko 😢

[@hammadabid917]

Very very good video

[@asaphtovar4834]

Can't understand what he is saying but still somehow very helpful thumbs up from me

[@hiteshburman5696]

Thankyou so much sir for your video

[@kunalmandal011]

Thankyou sir 🌸

[@Amitkumar-my6uc]

Good

[@everythingisok2133]

Awsm...😍😍

[@pandeyshashidhar]

thank you sir ji

[@anilbasnet2581]

Thank you sir 🙏

[@banashreebania]

Best❤

[@maheshthumati8107]

Asp jaise log college me kyu n padate ho yar

[@gurlal44]

Right

[@mhammadrh3279]

❤

[@feelingunfolded]

Thanku so much sir

[@sreekanthreddyalle9646]

Thank u sir

[@rafayatahmad1409]

Thanks sir

[@Divya-hz4hp]

Sir iske or bhi question aap btate to help ho jati....

[@SanjayDas-zq8hq]

Sir you r great

[@prashanthkumar8648]

Sir we can start from(0,0) point also know

[@ManojKumarSahoo]

Yes

[@emmanuelkisson3102]

yeah we can.

[@mohammedfaizan4862]

Nice

[@rafayatahmad1409]

Thanks

[@rafayatahmad1409]

Sir

[@MTA_Techno_Coding_5559]

Nice bro

[@manikantamani3100]

Tanq sir

[@ashokkumars4522]

Anyone can say correct answer
which one is relative rectangular point fixing format from following options
A)@dist,ang. B)@ x,y. C)x dist, y dist. D)@ dist < angle

[@AyushJha_07]

b

[@biswajeetdash3135]

We can draw it through the help of 0,0 origin it's too complicated to understand

[@ManojKumarSahoo]

Yes

[@biswajeetdash3135]

So why didn't u use that

[@ManojKumarSahoo]

U can consider origin as ur initial point

[@hiteshburman5696]

Sir aur questions batao na absolute,polar coordinate system ke baare me for engineering drawing

[@-PratikKamble]

Sir cad ki oral kaise hoti hai ,kya puchte hai

[@suluymallikarjuna2354]

Sir why you use (o) in RCS

[@ROhitSingh-vl3np]

Sir next video kab aha raha ha

[@rahulmolla1182]

Pls I have 1 question yahape 60 to highest hai x or y kaa to 80.20 and 80.40 keyse hoga pls bataye sirf isime confused huaa baki Saab samajh geya agar kisi v mera yeh question dekha so pls answer me

[@ManojKumarSahoo]

Bcoz hum pehle point ko origin pe na le kr 20,20 pe liye h

[@KuldeepSingh-po9ne]

Sir coordinate wrong h aapka Sayed. 1 point 20 20 kese huwa

[@ManojKumarSahoo]

Assume kiya hai

[@Deepak_Thakur_21]

0,0 le bhi to sakte h kya

[@ManojKumarSahoo]

Yes

[@mohitnagar8940]

Are sir point kese nikale
Ye to har koi kar leta hai

[@paramitasarkar6830]

Angle k Se solve krte hai

[@mushkanyadu2807]

Paramita Sarkar meko bhi angle smj nhi aya angle ka solution accha se btao na

[@tessaloniahtanamal1891]

subtitle please

[@anmoldhawan3639]

hai Ranbir Kapoor

[@priyabaghel7418]

Thank you so much sir...............

[@sangeetabaghel8566]

Thank you sir 🙏🏻