DIY GUIDE : Small auto paint repair and CLEAR COAT BLEND
HTML-код
- Опубликовано: 27 июл 2024
- In this episode, I'll share how to di a DIY spot paint repair and how to blend the clear coat. this is the simplest way to do a small repair on your bumper. I'll walk you through the process and share how to get the best results with this smart blend
SUPPORT THE CHANNEL
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
LIKE AND SHARE VIDEOS
SUBSCRIBE!
AFFILIATE LINKS!
COMMENT!
Business Inquiries: okpaintworx@gmail.com
Follow us on Instagram and get the scoop on upcoming projects!
/ garagenoise247
Follow us on Tik tok
vm.tiktok.com/ZMeV1et9D/
Tools and materials used in this video. (affiliate links)
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
upol#9 fade out reducer
amzn.to/3OfeMRz
3m ultra fine 800 grit sanding sponge
amzn.to/3X0IAp0
sunmight flexible sandpaper 800 grit finish
amzn.to/3BLuY7u
Eagle flexible sandpaper interface pad
www.amazon.com/dp/B001TYTYV2/...
R500 lvlp paint gun for small compressors
amzn.to/3ggFQmL
upol 2k primer
amzn.to/3OzRRQZ
low cost disposable cup system 1.0
amzn.to/3PfhKWs
astro sun light
amzn.to/3YbFFtT
premium tack cloths
amzn.to/3FK35zw
prep solvent
amzn.to/3FCoRl7
raven latex gloves
amzn.to/3BsiGBb
finish1 fc710 with slow hardner
amzn.to/3MM7TI7
70% isopropyl alcohol
amzn.to/3uCCy0F
masking machine
amzn.to/3pK3pVb
18inch masking paper
amzn.to/3wnKrGA
3m performance masking tape 3/4
amzn.to/3iFAwrF
3m pps 2.0 cups , liner, lid kit
amzn.to/2RQoNM2
masking plastic
amzn.to/3pOILDw
3m superfine sanding foam pad
amzn.to/3gelsj1
video equipment I use
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Go pro 7 black
amzn.to/35ddyAf
Rode wireless go
amzn.to/3xpJDAW
Dji osmo action
amzn.to/3cCjdUD
Acer Nito 5 laptop
amzn.to/3wvc2W0
CHECK OUT MY OTHER HOW TO VIDEOS
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Autobody repair made easy
• Auto body repair made ...
how to prepare primer for paint
• How to prepare a car p...
using body filler to repair a dent
/ q9rplqwcve
How to repair body damage on your car
• How to repair body dam...
how to save a bad paint job
• How to save a bad pain...
How to repair and paint your bumper
• How to save money pain...
How to remove fisheyes from your paint job!
• How to remove fisheyes...
How to save a bad paint job
• How to save a bad pain...
Disclaimer:
Due to factors beyond the control of Garage Noise, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Noise assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Garage Noise, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Noise. 
Авто/Мото
![MAF Teeski - Whole Thing (feat. VonOff1700) [Official Music Video]](http://i.ytimg.com/vi/SHWEj-ndz6g/mqdefault.jpg)
Thanks a lot! I was fairly certain I knew how to do it, but I’m glad I watched this. I learned a couple of important steps. I’m grateful!
Great to hear!
VERY cool and simple instructions!! Thanks for posting!!!
When I burn the clear, I put reducer in the clear. So the clear on the edges melts in and I like to sand it with 1500 grit sand paper. Buff the panel, for a better result. I mask the bumper does not matter how small the spot job is.
Sound like a great repair everyone has a little bit different technique. Appreciate your comment!
Glad I ran into this channel.. started my body tech journey in 2021 and I just got my first dealership job. Very helpful tips I’ll be using
Welcome, appreciate the comment and support brother!
Did you go to school?
Yes a big help for us DIY at home indeed cheers so much from Phil in Australia love the channel.
Awesome, thank you!
More great info! Thanks
You bet!
Very helpful, thanks!
You're welcome!
Hey I used that UPOL blend #9 on the sail panel of my 1970 Charger RT as I did some body repair and then blend job on the upper sail panel of the car. I used some of this video as inspiration and partial guide when completing my repair. I had never done a blend job before but It worked out really nice! Thanks!
Very cool! Thanks for the comment!
Great video Chris 👍
Thanks brother!
I sure did find it helpful. Thank you.
Glad it was helpful!
it was very helpful, thanks for your time.
Glad it was helpful!
Great video Chris. Very helpful.
Glad it was helpful!
Good video. That's a cool way to fix it. Thanks for the tips
👍
These videos are brilliant 👍👍
Glad you like them!
Great video Chris with some really helpful advice for us DIY painters, this type of repair won't last as long as a bumper off and a full repaint but they are a good alternative and as you said it will last a good while👏👍John UK
Thanks John, I'll be doing some more of these type of video's. They seem to be more helpful for beginners. Appreciate your comment and support!
That will be great Chris, I'll be looking forward to seeing them, I'm still going through all your back catalogue of videos, wow mate there is so much good info there👌👍
Looks great
Thanks!
With plastic bumpers you should be using an adhesion promoter so the paint doesn't peel.
Yes, over bare plastic. You should use adhesion promoter
You my friend are what Ive been looking for , truly great work, i have the exact same issue but on my hood
Awesome! Happy it helped!
This guys is amazing
Thank you! Appreciate the support!
Good job thanks
That was nice
👍
Oh yeah 👊🏻👍🏻
👍
This looks perfect to me! Can't see any defects / issues!
👍
I’ve used the Spray Max Glamour 2K clear in a pinch a few times. You can swipe nozzles off of lots of other spray cans and see what works for a different spray pattern. I’ve found some narrow “bird shot”, and I’ve found the wide “shotgun spray” and that is key. But that Spray Max has serious longevity. I did my drivers side quarter panel, and it has withstood the gas spill test, sunshine test, the lot. Passes with flying colors. And it is hard. Not an easy scratch. The only problem is that while it last out glossy as can be and you can watch it melt into the previous stoke or coat, when it dries it’s gonna have some orange peel. Just spray several coats. I keep one of those infrared heaters about two feet away from the panel just as it’s finishing flashing off. Also a key factor. It also helps reduce orange peel. But it cuts out fine. For what it is, it’s incredible. You just can’t really prevent the orange peel.
Not bad mate, To get a good blend takes time etc. and a good blender...I have tried many over the years. The best is De Beer s in a can.. Cheers
👍
Customer got some free overspray. Im sure they appreciated it
👍
Great video Chris!. Thanks.
Question regarding the settings.
What is general rule of adjusting these small touchup guns? What pressure should we keep for base and clear ? 20-30 or 10-15 ? How much fluid ? 1-2 turns out ? What typical distance -? Thanks 😊
Seriously I realy couldn't tell you. I go by the sound and I apologize I should have put it in the video. I will say for this touch up as low as you can get the psi and still get good paint atomization. I'll revisit this in another video. Appreciate your question.
@@GarageNoise thank you!). Since i am kinda new and just learning your video helping understand more how to fix issues i am running into during a painting. Lol i put on my touch up gun 30, then 25, then 20. After 5th time start using around 15. (Touchup gun from HF, silver one. Looks like a normal hvlp just smaller ) , next time will try 10 🤷🏻♂️ . Also, i noticed all my touchup guns (2from HF) and One R100 dont open wide fan. (Small but wide). They are more like from rattle can
How much time do you wait to spray on the blende and also time for polishing ? Steve
Do I need to use the blend if I’m polishing ?
Do u have any vids on painting rims?
This is awesome as shit. I'm about to do this on my beater car so it doesn't look like ass but also doesn't cost me a mint.
What you gonna do if the edges wrinkle up on ya 🤔 nice Chris👍
Paint the whole bumper🤣
Wow nice thanks cris
👍
I used DA one day and burned thru clear coat (just a thin layer). Now it looks like I have a slightly of color dot on my paint that you can only see during a sunshine. What can you suggest? I’m also from Oklahoma
Needs clear coat. Scuff panel with grey scotchbrite, clear coat whole panel
Sorry may be a silly question, is hobby airbrush possible to be used on this spot repair? What make me think using airbrush is hobby airbrush will spray more fine and suitable this area?
Yes, that will work great. I find it's almost to fine for a spot this big but on small scatches they work great.
I painted a guitar with 2k acrylic, and then 2k clear. I sanded through the clear on the very edge, 90 degree edge, just into the color base. I did this before polishing with a 1200 grit paper. I'm curious how I can apply your method to avoid having to sand and respray the entire guitar.
Is there a reason I shouldn't tape off anything beyond 1in of the small edge sand through? I was thinking I can spray more clear and then the UPOL blender and follow the rest of your guidance from this vid.
Is it critical to spray more color or can I get away with just clear and blender?
If it was me, I would sand it all down with 600. Blow a little color on it and then re clear the entire guitar, but if you wanted to just spot in that area you wanna wet sand with 1500 around the area where you'll apply the clear coat, blow in a little color on that burn through and then Blend and the clear like I did in the video. Then you gotta wash it in with a little reducer then you need to wet sand lightly and buff it out, but being that a guitar is not very big. I would just reclear the whole thing, it's gonna make it a lot easier.
What makes Finish 1 710 and 720. 710 being spot panel and 720 overall different? Can you use them interchangeably?
From my experience the overall is a bit slower drying which makes sense since it's for an overall paint job. I wouldn't use them together unless you speak with a SW paint rep they my have more detailed information.
@@GarageNoise I’m trying to reduce my inventory of products so I’ll stick with 710 after I finish using up 720. Thanks for the reply. I really enjoy your posts. Hope you had a good vacation!
@frankmaceyka4895 Thanks, brother ! Appreciate your support
I have a question when I spray the blend on how long do iI have to wait to buff it?
I'll typically buff the next day
That bumper needed a full respray but guess the owner only wanted to pay so much.i can understand that it was the daily drive car seen many miles on the road.Im sure if it was a new car hole bumper would have been done still a good job for what u needed to do in the end will only last so long.Great clip.
Yeah, it needed a respray. He asked me to brush touch it. He's a valued customer so I figured I'd do a video on a smart blend since I never have to opertunity to do them.
@@GarageNoise love your work it helps us DIY so much I'm in Australia Name is Phil help so much cheers these videos are great and the work u put into it thank you so much.
Chris can you please help me I have a ford focus mk3 titanium x iam putting a new bumper on the front comes already primed and I have primed the bonnet or hood as you say can I put one coat off base coat paint on and then another coat and a blend over the top and another coat of base coat paint and clear coat paint and the same Chris with the bumper so its matches the car somebody said just base coat it and then clear coat it
Sand smooth with 600, base coat until covered, then 2 coats of clear 10-15 minutes between coats.
@@GarageNoise cheers 🍻 Chris
Can you do a full fender spray with that detail gun?
You could ,might be kinda slow but you could get it done
@@GarageNoise would you be able to do a video of how to set up this spray gun? I used it for clear coat (Speedokote 2k clear), but it came out very dry or orange peeled.
Are you trying to limit the new clear to just the area that you hit with 2000 grit? I assume you don’t want to hit any area you did not sand right?
Absolutely, yes
Chris
How do we order Garage Noise Tee Shits
Garagenoisegear.com
So basically to make it look proper, full coat of clear ? Where does blend spray really come to proper uses ?
Short answer is never, it's not really the proper way to do it. The only time I might do it is down low on a rocker panel.
The over spray it real
Yup
How many pounds of pressure on the gun?
I can't recall, but you don't need much , I think about 10-15psi
Good video Chris. I might be answering my own question here. I have an 29 year old Toy Truck and the paint/clear has deteriorated on the roof and hood. I want to paint both panels for now to clean up the truck. On the roof the paint is rough in a 12" patch but ok going down the sides. It seems I can use this blend technique with 2000 grit then polish with the existing paint that is in decent shape. Is this correct? Thanks
I really think on a roof you'd be better off paint and blending the spot but clearing the roof completely. It wouldn't make sense to blend like this. I not really that much more work or materials and then it would last and look better than a blend.
@@GarageNoise Thank you for the advise!! Have a nice weekend.
Do reducer work on the melt in?
Yes
@@GarageNoise thanks 👍🏾
HOW LONG DO I WAIT TO SPRAY IT FOR THE BLEND
@@BLACKRAIN390 you can wash it in immediately after clearing
@@GarageNoise Kool👍🏾
Can you buff the same day
If you can let it sit ovenight , but I did buff this the same day usually after about 4 hour
@@GarageNoise ok cool thanks
I never used a gun that small
I would have expected overspray to be everywhere
👍
That's a side chic repair...😵🤯😂😂
😅
Well of course it is. Now hush!
jesus that's shocking DO NOT DO THIS! Atleast mask it out 🤦♂️
this is how not to do it
You should be ashamed of yourself.
🤣
Honestly, this was painful.
In what regard?
🤔
In any regard this is a dumb comment. He clearly stated he this was free fix to get rid of an eyesore, which he obviously did, without respraying the whole bumper cover.
There’s down and dirty and then there’s down and diiiiiirty. BUT, it CAN be done.
I've been looking for a good diy spot fix. I have a few small circular spots on the roof and hood, I don't feel like repainting the whole top for a few small spots.
Not very well done. So many things done incorrectly.
Did you watch the video? I think I mentioned that in the video. This is not the correct way to do a proper repair.
You my friend are what Ive been looking for , truly great work, i have the exact same issue but on my hood
👍