This video is the AT gear drive kit released by Omni. New truck settings are also included, so I hope this will be a reference for DIYers. 이번 영상은 Omni에서 출시된 AT 기어드리이브 Kit 입니다. 새로운 트럭 설정도 함께 있으니 DIY하실분들에게 참고가 되었으면 합니다.
First Superb video as always my good man. Very thorough and informative. Classy setup and it all worked well together esthetically. I love those wheels bro. Perfect thumbnail. Ride-on brother. 🤟
@@KAMiJUINs These wheels and trucks in 4wd form on an evo deck would make an "og" tribute to this hobby/sport. You'll reach the highest top speed you dare to attempt. Keep up the good work homie. 🤟
⚡🤙🏼 *I see a Kami Juins video, I tap to watch with no hesitation!!* 🤙🏼⚡ I was a bit worried when I saw movement at the 3mins mark 😂 I was like "oh no, it doesn't fit". Then you just tightened it, phew 😂 I'm not great with DIY stuff, so many screws 😭 That gear drive and trucks are stunnin though 🤩 I loved the TKP + DKP segment of the video!! I've seen people discuss wantin to do somethin like this and have always been curious how it would feel! I am sensitive to the movement of rear truck when I ride, I tend to ride front truck much, much looser than the rear so I'd love to try somethin like this. I've been considerin buyin Meepo TKP baseplate to try on my Flow 😂 Maybe just rear first then both trucks to compare. Personally I would defo choose cruiser setup for myself, I love street wheels and don't need too much torque. Awesome video! 🤙🏼🤙🏼
Haha, thank you, brother~ :) Actually, I think it was your idea to use two trucks together. Personally, it was such a nice setting, but there was a limit to expressing it in a video because it is feeling. First, it was good that the rear TKP supported the power part really stably, and the front DKP made flexible movements. Therefore, I could only feel the advantages of TKP and DKP with this truck setup. I would recommend that you try if you can get a TKP base plate of Meepo.!!!
The previous gear drive is a gear drive for street-type small-diameter wheels with a relatively small gear ratio (2.7) In addition, this gear drive is a gear drive for larger diameter tires than street-type wheels and has a relatively large gear ratio (4.3) As a result, if the same diameter wheels are used, the Street Gear Drive will have a high top speed, but the torque will be weakened and the acceleration will be insufficient. On the contrary, this gear drive has a relatively low top speed due to large gear ratios, but has less torque loss, which makes the acceleration stronger.
@KAMiJUINs thank you for the detailed response. let's say I use 140 mm wheels, which fall into the parameters of both gear drives. How significant of a top speed loss would I be looking at, do you think?
This video is the AT gear drive kit released by Omni.
New truck settings are also included, so I hope this will be a reference for DIYers.
이번 영상은 Omni에서 출시된 AT 기어드리이브 Kit 입니다.
새로운 트럭 설정도 함께 있으니 DIY하실분들에게 참고가 되었으면 합니다.
yay, KAMi approved so it has to be good. Was thinking about the street version to try on my BC3 🤩
HaHa Thanks bro~
I also think the street version is more special because it's not common in the market~ :)
Bravo, we do appreciate the awesome reviews. Informative as always, hope you enjoy your ride.
Thank you for coming and watching :)
First
Superb video as always my good man. Very thorough and informative. Classy setup and it all worked well together esthetically. I love those wheels bro. Perfect thumbnail. Ride-on brother. 🤟
Really well ~ lol :)
@@KAMiJUINs These wheels and trucks in 4wd form on an evo deck would make an "og" tribute to this hobby/sport. You'll reach the highest top speed you dare to attempt. Keep up the good work homie. 🤟
⚡🤙🏼 *I see a Kami Juins video, I tap to watch with no hesitation!!* 🤙🏼⚡
I was a bit worried when I saw movement at the 3mins mark 😂 I was like "oh no, it doesn't fit". Then you just tightened it, phew 😂
I'm not great with DIY stuff, so many screws 😭 That gear drive and trucks are stunnin though 🤩
I loved the TKP + DKP segment of the video!! I've seen people discuss wantin to do somethin like this and have always been curious how it would feel!
I am sensitive to the movement of rear truck when I ride, I tend to ride front truck much, much looser than the rear so I'd love to try somethin like this. I've been considerin buyin Meepo TKP baseplate to try on my Flow 😂 Maybe just rear first then both trucks to compare.
Personally I would defo choose cruiser setup for myself, I love street wheels and don't need too much torque.
Awesome video! 🤙🏼🤙🏼
Haha, thank you, brother~ :)
Actually, I think it was your idea to use two trucks together.
Personally, it was such a nice setting, but there was a limit to expressing it in a video because it is feeling.
First, it was good that the rear TKP supported the power part really stably, and the front DKP made flexible movements.
Therefore, I could only feel the advantages of TKP and DKP with this truck setup. I would recommend that you try if you can get a TKP base plate of Meepo.!!!
Bella, Bro
Grazie~
Good rewiew☺️👍always thank you😉
Thank you for watching too~ :)
Love your review. Thanks bro.
Thank you for watching :)
Where did you get the cable clamps for motor wire?
If you search for cable holders, you'll be able to buy them from places like Amazon.
Great video man. Just one question, what kind of difference in speed did you notoce beqteen the two gear drives using the same wheels?
The previous gear drive is a gear drive for street-type small-diameter wheels with a relatively small gear ratio (2.7)
In addition, this gear drive is a gear drive for larger diameter tires than street-type wheels and has a relatively large gear ratio (4.3)
As a result, if the same diameter wheels are used, the Street Gear Drive will have a high top speed, but the torque will be weakened and the acceleration will be insufficient.
On the contrary, this gear drive has a relatively low top speed due to large gear ratios, but has less torque loss, which makes the acceleration stronger.
@KAMiJUINs thank you for the detailed response. let's say I use 140 mm wheels, which fall into the parameters of both gear drives. How significant of a top speed loss would I be looking at, do you think?
omg another video! hello love you and your videos :)
Thank you so much~ :)
Nice setup
Thank bro~ :)
Good review always bro 😎😉👍
Thank you as always~ :)
Very nice
Thank you for watching :)
Bro, come fai a mantenere tutti i tuoi board in salute?
Non gestisco le mie tabelle.
Non ho tempo di montarlo spesso.
Ecco perché sembra che sia così.
Hi . Me gustaría comprar una de tus máquinas ❤
Según nuestra ley de desalmamiento, los individuos no pueden enviar artículos equipados con grandes baterías en el extranjero. Lo siento.
@@KAMiJUINs yo vivo en Colombia y Sogamoso Boyaca , no hay ninguna forma?
What deck is this?
Backfire deck !