Mikrotik Ros7.1 Dual ISP | Load Balance | Fail over | Configuration Setup 100% Merge.
HTML-код
- Опубликовано: 28 дек 2021
- In this tutorial I am showing you MikroTik Dual WAN Load Balancing with Fail over, Load balancing and fail over with multiple gateways,Bandwidth merge or Load Balancing with Fail over,Load balancing 2 WANs in MikroTik.
-------------------------------------------------------------------------------------------------------
Our website : thftp.com
-------------------------------------------------------------------------------------------------------
IF YOUR Need remote access mikrotik without public ip or any other Mikrotik Support need whatsapp me +8801612531992 this number but its paid service
====================================================
BGP Configuration Mikrotik Router Os7.1 : • Mikrotik BGP Fundament...
==================================================== 
Наука
Great tutorial. I have tried following several other peoples tutorials for doing this and your's is the only one that works. Brilliant thank you!
One of the most straight forward guides. Everything works great. Thank you! :)
This is not a recursive failover ... It's load balancing and auto fail over.... Booth isp are being used... Kudos
I combined the setup in this video with CAKE Queues. A top level Download tree queue w/ parent: global. A top level Upload tree queue w/ parent: global. They are using the cake download and cake upload queue types seen in one of your other videos. I had to add mangle forward connection mark rule with action mark packet for each ISP to mark the Download (with passthrough). I also had to add mangle output mark packet rules for the ISP output interfaces also with action mark packet for each ISP to mark the Upload.
With the download and upload packet marks, I was able to to configured the queue tree and I have my buffer bloat down to 1-7ms.
I thank you very much for this video as I couldn't have done all this without it. I've been trying to better understand how to load balance ISPs with different download/upload speeds, and this is working great so far!
Thanks, music made me feel like I was about to raid the Den of Evil, D2
thanks ! this tutorial is perfect. I tried others but something were always missing, and finally I found yours . If you can do the same for bonding that will be great . again thank you very much 🙏
Thank U Very Much🥰
This is Really True & Helpful Video for those who want Load Balancing .
Exellent ❗️❗️❗️
Thanks! This actually works in version 7.1! I configured this video for 5 providers, while two on Ether, two providers are picked up via WiFi 2.4 and 5, and one on LTE. At the same time, LTE via USB gives an Android phone))
THANKS a lot. You really saved me some heartbreak over here. Much appreciated. Cheers
thanks. can you make an tutorial how to using the new ros7.1 userman for WPA-EAP ?
чтобы разделить канал в разных пропорциях нужно добавить еще несколько коннектов в пункт PCC / и сделать разделение Per connection classifier / сделать если поток 75 и 100 мбит. Делаем 2 правила с 1 провайдером где у нас 100 . Per connection classifier будет 3/0 и 3/1. Затем делаем еще одно правило для 2 провайдера и в нем у нас Per connection classifier будет 3/2. Так будет соединяться канал . И вместо этого вы получите скорость 175 мбит. на main/шлюзе .
it work for me, thank you for advice dude
I ran into a problem: there was a connection, for example, via ISP1 (for example, RUclips). And my provider (ISP1) reduced the speed to almost zero, so it's impossible to watch RUclips, but there is a connection! At the same time, everything is fine on ISP2, the "fat" channel (75M) and it is idle. What settings are needed to track this moment and switch the connection to the "fat" channel? This applies, in fact, only to viewing RUclips or streaming video hosting. For surfing the Internet is not very important.
eres el mejor muchas gracias excelente video y muy bien explicado
you are good thank for this work
will this work if I use WAN/INTERNET (eth1) and LAN1 (eth2) on my device? hAP AC2.
my ISP1 on eth1 will be on bridge mo and getting public IP from my ISP.
i have setup dual LAN, now i want to set up default wan 1 or wan2 always how to set that ?
nice. But after pcc how to config Wireguard ,thanks
Exellent ❗️❗️❗️
Kudos!
good job sir
thank you
translate from Google:
After a month of looking and trying several tutorials (26 exactly) I found yours!!!! The only one that was step by step and it worked perfectly for me. THANK YOU VERY MUCH!!>
< I only have one problem... uploading to speed test sites always takes the lowest connection value. If it doesn't bother you... do you have any tips to solve this?>
THANK YOU VERY MUCH!!
THANK YOU VERY MUCH!!
THANK YOU VERY MUCH!!
THANK YOU VERY MUCH!!
Depois de um mês procurando e tentando vários tutoriais (26 exatamente) Encontrei o seu!!!! O unico que foi passo a passo e funcionou perfeitamente para mim. MUITO OBRIGADO!!
Só tenho um ploblema... o upload nos sites de testes de velocidade, sempre fica com o valor da menor conexão. Se não for incomodar... será q vc tem alguma dica para resolver isso?
Failover does not work like expected for me... ISP1 has no link to gateway (cable unplugged), ping from workstation to google gives destination host unreachable (from ISP1) but web traffic works. Windows says has no internet. Some websites loads, other not. Loading a website takes too long - about a minute - for first time.
Great job - thanks. I have a problem with port forwarding. While it still works for version 7.1.3. So much 7.1.5 does not work at all :-(
has anyone get port forwarding to work on this configuration
it’s work ❤️
How can you detect next hope down to disable an interface for failover
You can setup Isp1 router distance 1 and Isp2 Router Distance 2
What about IP/Routes/General/Distance parameter?
Good, but no need Input and accept, because prerouting before input, need pre LANs and out, thats all, cheched, working ) Thx.
Hola, Saludos desde Chile, muy buen video, espero que me puedan ayudar... recién incorporandome a Mikrotik y me gustaria si me pudieras ayudar o orientar un poco, me compre un equipo RouterBoard Rb1100ahx2 Balanceador De Carga Con Failover del cual intento configurar, pero hasta ahora si puedo navegar, pero he tenido varios problemas, ejemplo de ellos es que navega muy lento siendo que tengo fibra simétrica de 940/940 mb de la empresa Telsur y aparte un servicio de respaldo de WOM de internet móvil con un router enchufado a la electricidad (no el USB).
Agradecería si me pudieras orientar o si me pudieran compartir un script o bloc de notas para poder correrlo y comparar con lo que yo realice ya que me navega muy lento por lo cual actualmente deje conectado el cable lan del proveedor directo a mi router que antes tenía.
Ether1 tengo la WAN1 o ISP1 de Empresa Telsur 192.168.1.254
Ether2 tengo la WAN2 o ISP2 de Empresa WOM 192.168.8.1
Ether5 tengo la LAN 192.168.77.1
Mi idea es poder sumar ambas velocidades y en caso que caiga un ISP pueda continuar con el servicio de internet.
Desde ya muchas gracias por todo.
GRACIAS.
Great tutorial. I tested the system as i have a 600mb isp1 and isp2 is starlink around 200mb. But whe doing a speedtest i only get from 30 to 70mb form the isp2. Is there anyway to make each other to up and down speed the same time? Thanks for the tutorial was awseome
Thanks for sharing Your Review
Thanks! I'm trying recursive gateway + failover just like in v6... didn't work...
maybe you mistake configure ...
I have a working config of recursive failover
how to do with single isp dual pppoe?
Your need Different Ip address input
walang net hotspot ko sa config na to pls help
nth please
we need more easy system
Kindly share a link of version 7.6 please.
Same
plz help me
how about with hotspot
same here no internet in my hotspot
Sana walang background music lodi,mas maganda pag ikaw talaga nag eexplain
If Your need Anything whatsapp me
All distance is 1 in route list?
mark routing distance is 1
There's easier way using just route distances and netwatch.
it will work on 7.1 version?
It's always great to say... Is there a place to look for version 7.1?
yes
Please can you share?
this is work on 6.47 ver
Yes
No speck
can you share or upload whole this configuration script file
If you Need This Configure give me access your Mikrotik router. But its Paid Service
@@remoteservice8222 how can i avail paid access pm me pls
@@victorgamer7024 1000 Pkr
@@victorgamer7024 i can give you the script
@@stillsipaulo9246 please give me script
no packet PCC.. no sense
Thank you for sharing this tutorial
I followed the steps but couldn't find Tables in Routing menu (ruclips.net/video/IsJlBqpVgGo/видео.html), so I couldn't finish the configuration.
My router uses MikroTik OS 6.48.6
Please help
Os 6.48.6 no need tables menu you just write new routing mark
OS v7 Left Panel>Routing>Tables.
os ver 7 only