If you could have any RC Car what would it be? 🚗Win RC MEGA Bundle raffall.com/369369/enter-raffle-to-win-10x-rc-car-mega-bundle-10000-cash-alternative-hosted-by-kevin-talbot
Yep, or finally get out to running it & then some simple fix is needed & you have to go back home to do it. Had a rear wheelnut unscrew on my stampede 2wd 3 minutes into a bash after a 10 minute walk. Ofc brought screwdriver in case a screw was backing out on me as i have seen before on it, but not the wheelnut tool lol.
You've got to give that little fella a car, he was such a sport, and we've all been there at that age. Set up a go fund him, and turn that frown upside down 😅
I think the MT10 is more durable, it took Mad Max a whole video to break it and he cheated 😂, would love to see a Kagama on the channel soon! Great video as always Kev!
Except you have to factor in buying it twice for something as basic as a replacement driveshaft... 😮😂 Think id just stump up the extra for the mt10, but each to their own.
I think that mic quality in the wind is just fine. Its a perfectly acceptable compromise in my opinion. Also looking forward to seeing more on this car from you 👍
I got my son a MT10 for Christmas last year (he turned 5 this last summer) and it has been really good. Like anything, it does have its wear and tear and finding replacement parts is decently easy. A few things to note for anyone who is looking to get one. The bodies are expensive ($50 in the US) and actually kind of tough to find at times. I have had to replace the receiver as it started to get squirrely but I have a SC10 pro 4 (very similar to MT10 but the short course truck version. All electronics are exactly the same) and havent had any issues with mine, so it may have just been a one off. The arma granite or the traxxas stampede do seem much easier to find parts/bodies for but the MT10 isn't terrible, its just somewhat harder
Having both of these, give me the mt10 all day. Better quality, better parts support and better aftermarket support. The aluminum on my flux is Amazon quality. In fact, the whole truck reminds me of something you'd buy off Amazon for $200
Hey kevin ! Love your videos, just wanted to give you a shop trick, When tapping threads into aluminum , chuck the tap into a drill, put some oil on the tap, run it in, then back it out with the drill.. .. there y ago, Bob's your uncle, much smoother tapping, not klunky like using a tee handle. .we use taps like that on a daily basis, I've broken more taps by hand then with the drill tric. Also , smoother threads,and straighter too .. Cheers Mate ! Steve from South Dakota U.S.A. : )
I'd rather have NO wind noise over hearing an RC!! THANK YOU!!!! I am not really into rc cars. I do have a couple of nitro trucks, but i don't use them. However, I really enjoy watching your content!
I love my Associated SC10 Short Course racer. MT10 is the same car with Monster Truck tires. Associated parts are plentiful, one can find 'Better than Stock' parts and you know they wont go out of business. The Worlds Cheapest R/C car gets expensive if you have to buy a 2nd parts donor car to fix the 1st one.
I bought a Associated MT10 when you reviewed it and changed out the lower A arms because you did. It is still going strong although I do not bash like you do. It was a very good choice.
I have both of these and absolutely dig both of them. I broke the front control arm on my Rival MT10 on the 3rd jump( and it was not really a big jump either) I haven’t broke anything on my Maverick yet. Think it was just one of those bad landings and in the cold as well. I equally abuse them both. I’ve had to adjust the slipper on the Maverick once and popped a front suspension link off once. I Highly recommend both! Great video as always Kev!
Give it to Max and Sempy to have a go they did a good job with the MT10. Personally the MT10 took more of a bashing before it broke anything but it looks promising, we have to wait and see how it does next time out 😊😊😊😊😊
Thing i dont get, Back in the 1980's when BMX Skateboarding and Skating were popular, Councils gave us no Skate parks of BMX tracks, Yet now, when there are bugger all BMXers Skaters or boarders they build hundreds of Tracks and skate parks, Are the Government and their councils really 40 years behind the times????
100% I kept contacting local councils in the late 80's and early 90's about getting some skateparks built. none were interested. Now they are everywhere. I'm in Aus too.
Looks great for the price. Could you please test the MJX Hyper Go 10208 V2 as well? Similar price and size, and set up for 4S. (You seemed to like the 16208)
By that rationale as soon as you have two reviews on a rig, anything else is surplus to requirements... People drive / test differently, perhaps he just likes Kevs take on things?
I live in vermont. I would love a monster size snowmobile..even nitro powered.. big enough to haul a baby.....I just subscribed to you... I love the energy you have.🎉🎉🎉
I have 4 MT10's. 2 were brushed, on sale for $179.00ea. That I converted over to brushless for less than $35.00. My other 2 were bought before and came brushless and cost $330. each. There very fast on 3s. I like 2s for most my cars, 3s for some added excitement. I like Tamiya and Kyosho 1/10 scale buggies. so 3s is dangerous fast in them. I can buy 2) 2s batteries for $20. bucks get 30 min of drive time. I do have a 1/4 scale 26cc Marder set up for sand hill climbing. that hasn't been driven in 15 years. lol
WOW!I'm really impressed with it.I still don't know if I should get the MT10 or Maverick Quantum2 flux,because the MT10 has the advantage of durability, but the Quantum flux has the advantage of being cheap
The wind-blocking is 9/10. I personally think I hear the vehicle much better, or at least its that I can imagine how it sounds better. Or maybe it is because the sound of Wind is like nails on a chalkboard, regardless I think it's much nicer with the new mic.
Key word “Couldn’t find the part for it…” Great vid, but that’s the biggest factor in RC is replacement parts, for me. I’d rather pay more and be able to get any replacement part in 3 days from amain
Whats a good camber and toe for a rc moster truck i have a redcat blackout set up on 4s. Should I toe the front tires in or out or just keep them straight.
Hi! I’m a beginner in rc cars, but I would like to learn. Is the Maverick Quantum2 MT Flux 80A 1/10 4WD Monster Truck RTR MV150406 compatible with 4S lithium battery? To boost the top speed since everyone says it’s top speed is 40 MPH.
kev just whant to say thx for your vids there are really cool im here for 6 years now and nevr been bored for once and thx to you i could reperre my slash ❤❤❤❤❤❤❤❤
Wow seems like a tank! The rival mt10 has weak stock arms as well. I feel like that first driveshaft was a fluke. Does rpm make arms for it? It needs rpm lower arms and a Max durability test! Same test the mt10 had.
Would aluminum wheels help on the speed run cars? If the wheels can’t deform the foam can have a better chance wearing evenly in theory. Also when you come to Florida you should try and collab with Cleetus McFarland You could put a mic on board the RC then have RC sounds without wind noise and your mic with the wind protection.
My MT-10 is Fire I have put it thew swampy 10 hrs then a snow storm same day jumping it at the skate park I can go on and on. Still have the original tires that's blown out at least 5 times each with heavy gluing. And that's it. Bought when you first did the first video on it. Thanks Kevin.
I've owned both of these and I prefer the MT10 but both have their fair share of issues and neither are indestructible. The MT10 has been around longer so there are far more upgrade parts available. With upgrades, the MT10 is much tougher.
could you please do a video review on RIAARIO RC cars or specifically the carbon fiber 1/10 edition i want to buy one but don't know what if i should get it, thanks
I don't know. I guess I expected it to be more durable, and less expensive? For only $50 more I'm still happily favoring my MT10. It is unreasonably tough, and a blast Update: I paid $300 tax included for my MT10. I see the price is $340 now, not including taxes. I'm feeling a little more neutral about it now.
If you are talking cheap like 100 dollars than a red cat truck is pretty good. I have one and I ran it into a tree at full speed and have rolled it a bunch and it is like it is brand new. It also is so fast and fun to use
Hey kev ! Have you seen the new arrma grom brushless ! You should see how fast you can make one go , a mini speed car would be really cool to see , the typhon seems like a good build
I agree with a lot of the others, MT10 all day, only a few minutes of video and that truck broke….. twice. MT10 took an entire video to break and even then… it really took some effort.
Maverick really made a great rig with the q2, but sadly they used the same driveshafts and shocks. Both of which were an issue with the older models (I'm well versed in maverick quantum flux issues lol)
I’m about two minutes in and I’m calling it. The Associated is better/more durable. Considering I watched and rewatched all the abuse the Associated took without breaking, and I watched the live fixing of this Quantum Flux thing wherein it appeared that you broke two, I think the Associated’s crown is safe. Now let’s see if I’m right at the end? Edit: Ok I watched till the end and given the absolute beating the associated took, and the lack of parts support for the quantum thingy, I’m surprised by the conclusion. But what do I know?
If you could have any RC Car what would it be?
🚗Win RC MEGA Bundle raffall.com/369369/enter-raffle-to-win-10x-rc-car-mega-bundle-10000-cash-alternative-hosted-by-kevin-talbot
Traxxas xmaxx please❤❤
Losi 2.0
ARRMA Big Rock 6S
Or a Traxxas Rustler 4x4 VXL
traxxas xmaxx because i dream about it every night😅
Muffled sound way better than wind noise
That little boy is all of us when we break our rc cars in the middle of a good bash xD
Yep, or finally get out to running it & then some simple fix is needed & you have to go back home to do it.
Had a rear wheelnut unscrew on my stampede 2wd 3 minutes into a bash after a 10 minute walk.
Ofc brought screwdriver in case a screw was backing out on me as i have seen before on it, but not the wheelnut tool lol.
@Mini-z1994 true!!
Even looks like my son....
Kev did you fix the little guy’s car?
You've got to give that little fella a car, he was such a sport, and we've all been there at that age. Set up a go fund him, and turn that frown upside down 😅
I think the MT10 is more durable, it took Mad Max a whole video to break it and he cheated 😂, would love to see a Kagama on the channel soon! Great video as always Kev!
But the price. The newer and durable quantum 2 XT is just 250$ and equal to the MT10 EXCEPT... the central differential. Every else is identical
Except you have to factor in buying it twice for something as basic as a replacement driveshaft... 😮😂 Think id just stump up the extra for the mt10, but each to their own.
I'll take the slightly muffled RC sounds over the horrendous wind noise any day. Good job Kev!
Same!! I'll defo use this mic on windy days!
I think that mic quality in the wind is just fine. Its a perfectly acceptable compromise in my opinion. Also looking forward to seeing more on this car from you 👍
You know your rich when dirt cheap is 250 bucks.
I got my son a MT10 for Christmas last year (he turned 5 this last summer) and it has been really good. Like anything, it does have its wear and tear and finding replacement parts is decently easy. A few things to note for anyone who is looking to get one. The bodies are expensive ($50 in the US) and actually kind of tough to find at times. I have had to replace the receiver as it started to get squirrely but I have a SC10 pro 4 (very similar to MT10 but the short course truck version. All electronics are exactly the same) and havent had any issues with mine, so it may have just been a one off. The arma granite or the traxxas stampede do seem much easier to find parts/bodies for but the MT10 isn't terrible, its just somewhat harder
Having both of these, give me the mt10 all day. Better quality, better parts support and better aftermarket support. The aluminum on my flux is Amazon quality. In fact, the whole truck reminds me of something you'd buy off Amazon for $200
In the US, the Quantum Flux is about $90 cheaper than the MT10. Despite the breakage, it just might be the best value 1/10 truck.
Hey kevin ! Love your videos, just wanted to give you a shop trick, When tapping threads into aluminum , chuck the tap into a drill, put some oil on the tap, run it in, then back it out with the drill.. .. there y ago, Bob's your uncle, much smoother tapping, not klunky like using a tee handle. .we use taps like that on a daily basis, I've broken more taps by hand then with the drill tric. Also , smoother threads,and straighter too ..
Cheers Mate ! Steve from South Dakota U.S.A. : )
Great microphone Kev! Really clear and can hear the rc's too
I'd rather have NO wind noise over hearing an RC!! THANK YOU!!!! I am not really into rc cars. I do have a couple of nitro trucks, but i don't use them. However, I really enjoy watching your content!
Getting rid of the windnoise is more important than muffling the rc sound.
I love my Associated SC10 Short Course racer. MT10 is the same car with Monster Truck tires. Associated parts are plentiful, one can find 'Better than Stock' parts and you know they wont go out of business.
The Worlds Cheapest R/C car gets expensive if you have to buy a 2nd parts donor car to fix the 1st one.
I bought a Associated MT10 when you reviewed it and changed out the lower A arms because you did. It is still going strong although I do not bash like you do. It was a very good choice.
Exact same here!
I did exactly the same lol
Arlo was not impressed with you two! 🤣 that look!
What a beautiful place to live. I know this is about RC truck bashing but your videos really inspire me to travel also!!!
Kev you are by far my favourite YT channel your energy and authenticity is unmatched. Keep up the good work mate 🤘
I have both of these and absolutely dig both of them. I broke the front control arm on my Rival MT10 on the 3rd jump( and it was not really a big jump either) I haven’t broke anything on my Maverick yet. Think it was just one of those bad landings and in the cold as well. I equally abuse them both. I’ve had to adjust the slipper on the Maverick once and popped a front suspension link off once. I Highly recommend both! Great video as always Kev!
Give it to Max and Sempy to have a go they did a good job with the MT10. Personally the MT10 took more of a bashing before it broke anything but it looks promising, we have to wait and see how it does next time out
😊😊😊😊😊
My mate has the quantum flux rally car and I was absolutely amazed at the smile to cost ratio . He ran it on 4s and it ripped!
Thing i dont get, Back in the 1980's when BMX Skateboarding and Skating were popular, Councils gave us no Skate parks of BMX tracks, Yet now, when there are bugger all BMXers Skaters or boarders they build hundreds of Tracks and skate parks, Are the Government and their councils really 40 years behind the times????
Our skate park is constantly full with kids and young people. A brilliant thing👍🏽
100% I kept contacting local councils in the late 80's and early 90's about getting some skateparks built. none were interested. Now they are everywhere. I'm in Aus too.
It's just taken this long for those frustrated skaters to grow up and become councillors.
In my opinion you must try the Rlaarlo’s Omni terminator Kev!
I would love that video, but man, oh man, Kevin would destroy it. I am positive! The Terminator is still my absolute favorite care this year, though!
I see Kev uploads, I click, I like. Simple stuff
its always a good day when kevin talbot uploads
I would take the MT10
Before you send me all those rc cars and boats Kev, you should let that little boy pick one or two 😂
Looks great for the price. Could you please test the MJX Hyper Go 10208 V2 as well? Similar price and size, and set up for 4S. (You seemed to like the 16208)
my brother has a hypergo. the thing is dang near indestructible!
There ls about 500 reviews of that what’s wrong with one of those
By that rationale as soon as you have two reviews on a rig, anything else is surplus to requirements... People drive / test differently, perhaps he just likes Kevs take on things?
So when's the UDR video coming out? I can't wait!
He has made a video of the Traxxas UDR already. Go to videos and find it.
For me personally the Rival mt10 is the one to choose , i have a video on both and ive had bad luck with the Maverick..... Good video mate 👍🏻
That throwing the controller down as sulking off is exactly my son's reaction whenever anything goes wrong. Hahahaha.
I live in vermont. I would love a monster size snowmobile..even nitro powered.. big enough to haul a baby.....I just subscribed to you... I love the energy you have.🎉🎉🎉
"It loves it!". That always cracks me up.
Kevin when you threw down the control and walked away i couldnt stop laughing that was hilarious to have been in the video😂
I love all of you video’s you always Make me laugh and I know you are a good person because you are always laughing and smiling
3M congratulations😄🎉 love from sri lanka 🇱🇰❤️😁.
Sickest giveaway to date! Keep killing it Kev! I got my tickets. Good luck to all
I vote for the new mics - we can hear the RC sounds when you test indoors. [Outside] If they are loud enough you can still hear it through the mic.
i love how upbeat he is keep up the good work
Question Kev. Why don't you make/buy a set of connectors that go from Deans to XC60 (and vice versa )etc etc. Saves the aggro and warranty loss !
I have 4 MT10's. 2 were brushed, on sale for $179.00ea. That I converted over to brushless for less than $35.00. My other 2 were bought before and came brushless and cost $330. each. There very fast on 3s. I like 2s for most my cars, 3s for some added excitement. I like Tamiya and Kyosho 1/10 scale buggies. so 3s is dangerous fast in them. I can buy 2) 2s batteries for $20. bucks get 30 min of drive time. I do have a 1/4 scale 26cc Marder set up for sand hill climbing. that hasn't been driven in 15 years. lol
Cheap is good, but parts availability is even better lol
Hi Kev let's try Mjx 10208 v2 soon ?
WOW!I'm really impressed with it.I still don't know if I should get the MT10 or Maverick Quantum2 flux,because the MT10 has the advantage of durability, but the Quantum flux has the advantage of being cheap
I think I like the my10 better. Great vid ! Cheers 🥂 R.I.P. Quantum
Congrats on 3 million!
Why do you prefer T deans over xt90?
To think that in my Kraton EXB 6s the shock absorber broke just from driving on a straight line...
3 Million Subscribers! Cant wait for the stunt plane!
If your Familear with Van Halen... The Maverick Definitely Represents his Guitar and Lifestyle.. How Cool ... Props from New Jersey..USA... 👍...
MT10 ftw. I’d also worry about long term parts availability for the other
Love the cheap Rcs ❤️ thanks for the vid Kev
The wind-blocking is 9/10.
I personally think I hear the vehicle much better, or at least its that I can imagine how it sounds better.
Or maybe it is because the sound of Wind is like nails on a chalkboard, regardless I think it's much nicer with the new mic.
TEMPERATURE outside is a big factor here.
I still wote mt10 in the long run tho. Keep at it! Great vid!
I saw that ARRMA Fury! Been looking forward to some new videos on it and the new brushless.
Key word “Couldn’t find the part for it…”
Great vid, but that’s the biggest factor in RC is replacement parts, for me.
I’d rather pay more and be able to get any replacement part in 3 days from amain
Whats a good camber and toe for a rc moster truck i have a redcat blackout set up on 4s. Should I toe the front tires in or out or just keep them straight.
Its a tough truck for sure!! IDK if it takes the crown? Thanks for posting!!
This looks so much better than I thought it would. Still awesome. ..
Hi! I’m a beginner in rc cars, but I would like to learn. Is the Maverick Quantum2 MT Flux 80A 1/10 4WD Monster Truck RTR MV150406 compatible with 4S lithium battery? To boost the top speed since everyone says it’s top speed is 40 MPH.
Kev can we get more trx4 videos
Edit: congrats for 3 million subscribers kev
kev just whant to say thx for your vids there are really cool im here for 6 years now and nevr been bored for once and thx to you i could reperre my slash ❤❤❤❤❤❤❤❤
Wow seems like a tank! The rival mt10 has weak stock arms as well. I feel like that first driveshaft was a fluke. Does rpm make arms for it? It needs rpm lower arms and a Max durability test! Same test the mt10 had.
For the rival mt10 rpm does make arms. Probably after its popularity exploded over night.
@@Vel_178 yes I know. Kev installed them on his mt10. I was referring to if rpm makes arms for the quantum2. I hope they do!
Would aluminum wheels help on the speed run cars? If the wheels can’t deform the foam can have a better chance wearing evenly in theory. Also when you come to Florida you should try and collab with Cleetus McFarland
You could put a mic on board the RC then have RC sounds without wind noise and your mic with the wind protection.
Could you get your hands on the truggy version please would love to see how good it is and what's your thoughts thanks 🙏
Lol the lil boy is exactly how I feel goin to work evry day😂
My MT-10 is Fire I have put it thew swampy 10 hrs then a snow storm same day jumping it at the skate park I can go on and on. Still have the original tires that's blown out at least 5 times each with heavy gluing. And that's it.
Bought when you first did the first video on it. Thanks Kevin.
Arrma Vorteks Mega 2WD. Same as the Gorgon but lcg. I can not break this, am I just as rough with my stuff as stampy.
I've owned both of these and I prefer the MT10 but both have their fair share of issues and neither are indestructible. The MT10 has been around longer so there are far more upgrade parts available. With upgrades, the MT10 is much tougher.
MT10 is easier to get parts for, so it wins hands down.
could you please do a video review on RIAARIO RC cars or specifically the carbon fiber 1/10 edition i want to buy one but don't know what if i should get it, thanks
I don't know. I guess I expected it to be more durable, and less expensive? For only $50 more I'm still happily favoring my MT10. It is unreasonably tough, and a blast
Update: I paid $300 tax included for my MT10. I see the price is $340 now, not including taxes. I'm feeling a little more neutral about it now.
Because of you, the x-maxx puts a smile on my face, looking for my first job so I can buy one 😁 love the vids kev!
one last chance for the Maverick, Kev :)
It was colder than when you ran the mt10 but tbh the mt10 is hard to beat
If you are talking cheap like 100 dollars than a red cat truck is pretty good. I have one and I ran it into a tree at full speed and have rolled it a bunch and it is like it is brand new. It also is so fast and fun to use
I actually still enjoy my Maverick Quantum Flux 3s but have the 80amp esc and HD version. Can’t fault it in all honesty 🎄
Mic sounds great Kev!
hi mr kevin i love your videos i really like how you upgrade it even when they break 🙃
Kev can you do a RIAARIO Mini 1:10 brushless please. And that kid make me laugh😂
Its decent but 250 quid is a lot for something you can get replacement parts for.
I think .. what you need .. is a pair of Mr.JWW Sunglasses . Why ? Because it's FUNNY !!!❤❤❤❤
New mic is good muffling RC noise is absolutely fine haha they’re hella loud
When Kev tests rc, you will know the truth. They say it is the best over MT10. They're dreaming
Always wanted a RC car but I cannot afforded
“Oh there it is, that button right in the middle with the internationally recognized on and off icon”
Derp
Mjx 10208 next 👀
Hey Kev you should do a video on the Losi micro b
Great vid Kev, when’s the Arrma grom video coming btw
Hey kev ! Have you seen the new arrma grom brushless ! You should see how fast you can make one go , a mini speed car would be really cool to see , the typhon seems like a good build
If i could get any it would be the XRT it Just looks so good and it is i think even beter
Kevin make us crazy man about rc car hahaha
Nice! I actually have the quantum Mt flux, incredibly good for the price
I agree with a lot of the others, MT10 all day, only a few minutes of video and that truck broke….. twice. MT10 took an entire video to break and even then… it really took some effort.
I loved that the MT10 was Max proof in that other video 😂
Looking for best rc car under $200 for 8 yo to get started. I've been looking at Arrma Vorteks or Redcat Piranha any opinions.
Kev you just hit 3 million subscribers
boom!
Now MJX 10208 V2 is the best dirt dirt cheap rc
maybe ill have to test it then and see!
@KevinTalbotTV mjx 10208 has center diff and all 1/8 scale cvd's around, and it can take up to 4s from the box
@Dani4-108 yup it is a beast! Well on 4s it is. I am not sure why the performance goes down so hard on 3s!
Maverick really made a great rig with the q2, but sadly they used the same driveshafts and shocks. Both of which were an issue with the older models (I'm well versed in maverick quantum flux issues lol)
I’m about two minutes in and I’m calling it. The Associated is better/more durable. Considering I watched and rewatched all the abuse the Associated took without breaking, and I watched the live fixing of this Quantum Flux thing wherein it appeared that you broke two, I think the Associated’s crown is safe. Now let’s see if I’m right at the end?
Edit: Ok I watched till the end and given the absolute beating the associated took, and the lack of parts support for the quantum thingy, I’m surprised by the conclusion. But what do I know?
At 5:07 you can see the new arrma fury mega. Wonder if Kevs gonna do a video on it?