Thx! I also changed a few parts this week , the tecno bos exhaust is not that powerful so i replaced it with a tecno erstoril exhaust and new higher (340mm) shock absorbers! Really liked building the moped!
@@two_stroke_rider vraagje, heb je met die langere achter veren er niet last van dat je stuur te laag is? ben van plan om een dmp cross stuur te halen of een wat hogere, laat maar weten!!!
Een van mijn vrienden heeft hem volgens mij gekocht, zat er een stikker op die zei: “pas op, ik heb aan deze tomos lopen hannesen en kan zich tijdens het rijden zelf uit elkaar halen”? Is echt gaaf.
What suspension fork and shock absorber size do you have? edit: I found it, it is a streetmate suspension fork and 340mm shock absorber thanks for the awesome build!
Haha funny that you spotted that! I think the fitment is the same on puch, so it is just plug and play with some minor changes like the exhaust on the other side and the carburetor.
@@two_stroke_rider Thanks for the reply! I have an Tomos too , 2 days ago i tryed to fit the e50 Motor but it was too big:(…. I really enjoy your whellie Videos !
Hi, it was a metal pipe that i used. I sawed the pipe diagonally and measured it exactly so that it fit between the frame. Then I welded it in between with a welding machine. Hope you understand know :)
I almost forgot to say that it is even better than normal, the frame is reinforced making it stronger and can no longer bend. The only thing that could go wrong is the welding. Be careful when welding that you don't go through the frame!
![Deranged Granny 2024 #LMN | Lifetime Movies [NEW] 2024 | Based On A True Story](http://i.ytimg.com/vi/uYyEK7NkxEU/mqdefault.jpg)
![Ice On My Teeth - ATEEZ エイティーズ 에이티즈 [Music Bank] | KBS WORLD TV 241115](http://i.ytimg.com/vi/c-n92OgbbwA/mqdefault.jpg)
I want to do something similar, but this is amazing
Thx! I also changed a few parts this week , the tecno bos exhaust is not that powerful so i replaced it with a tecno erstoril exhaust and new higher (340mm) shock absorbers! Really liked building the moped!
@@two_stroke_rider vraagje, heb je met die langere achter veren er niet last van dat je stuur te laag is? ben van plan om een dmp cross stuur te halen of een wat hogere, laat maar weten!!!
Een van mijn vrienden heeft hem volgens mij gekocht, zat er een stikker op die zei: “pas op, ik heb aan deze tomos lopen hannesen en kan zich tijdens het rijden zelf uit elkaar halen”? Is echt gaaf.
Hahah klopt ja! Die sticker is van @dutchriders thanks man!
What suspension fork and shock absorber size do you have?
edit: I found it, it is a streetmate suspension fork and 340mm shock absorber thanks for the awesome build!
Thx! I bought some 340mm shock absorbers on Tomoshandel. And an hydraulic fork on marketplace, (the streetmate fork is a little bit different)
insane build, what forks did you use?
wow thats insane
How did your friend fit that puch e50 Motor in His Tomos!!?? ✌️I mean the Blue Tomos in the End
Haha funny that you spotted that! I think the fitment is the same on puch, so it is just plug and play with some minor changes like the exhaust on the other side and the carburetor.
@@two_stroke_rider Thanks for the reply! I have an Tomos too , 2 days ago i tryed to fit the e50 Motor but it was too big:(…. I really enjoy your whellie Videos !
is het frame standard grote want hij lijkt langer
What is that red cable for? I never understand what is it for?
It’s a killswitch. It is a rope around my wrist so the motor turns off when i fall
@@two_stroke_rider oh, thanks for explaining
where did you get this tires?
Where did you get the tires
Od kok motora ti je prednja vila
Vraagje welke verf heb je gebruikt
Motip rood
😍Wow
Could you tell me how you made that stick between the gas tank and seat beacusle like to make it but i dont if it's safe THANKS
Hi, it was a metal pipe that i used. I sawed the pipe diagonally and measured it exactly so that it fit between the frame. Then I welded it in between with a welding machine. Hope you understand know :)
I almost forgot to say that it is even better than normal, the frame is reinforced making it stronger and can no longer bend.
The only thing that could go wrong is the welding. Be careful when welding that you don't go through the frame!
Thanks you m
But you can buy a bar without welding it into the frame
@@onepistonthat’s true, but back then when i made this video there were none for tomos.
Is die achter houder van die duo Seat stevig zo? Want ik twijfel of ik t met of zonder bagagedrager ga doen
Ja is zeker stevig , ik heb hem gewoon rond het frame gebout zegmaar
What model is suspension what brand name
I don’t know the name because it’s standard on the latest models but i saw EBR forks on the internet who look the same
What size are the tires?
16 inch tire 2.25x16/2.50x16
@@two_stroke_riderit will fit in to the stock suspension?
What tires are those
Kenda cross
@@two_stroke_rider k thanks
Where buy forks
At Tomoshandel!
I want do to this too
how much did it cost ?
€400
@@two_stroke_rider thanks !
Hoeveel heeft het in totaal gekost
€700 met prijs van de tomos erbij
wat is de kleur code?
Motip rood grote bus gewoon, is al een tijdje geleden dus zou het niet weten 😅
@@two_stroke_rider hahahah oke
link to offroad tires?
They are everywhere out of stock sadly.
Are those tires especially for tomos?