Many years ago I got the chance to enter 2 lift motor rooms, while working as a security guard. One of them was the opposite to the one in your video, as it was really spacious and brightly illuminated. It was in a high-rise building with 27 floors, and it housed 4 motors of 4 of the 5 lifts. I don`t remember much more, as it was my duty to take a look inside, once per night. But I do remember, that I was fascinated by the machinery! The other motor room was in an older, 3 story building. The company I worked for didn`t use the third floor, it looked like the whole building was going to be tore down (as far as I know, it`s still there). Once per night, I had to check the deserted third floor for any unusual signs, as well as take a look in the motor room. The motor room was like the third floor: dirty, flickering lights, and a rather rusty machinery. The elevator used to malfunction at least once per week. As I wasn`t an elevator fan, by then, I never took any pictures of the machine rooms. Wish I could go back and explore them some more, take some pictures and videos and share them with you all. Thanks for your inspiring videos! My friends say I`m weird, cause I use to watch elevator related videos for hours ;)
I must say, I admire your bravery climbing up that maintenance 'room': seeing that elevator shaft popping up right next to the entry looked quite scary.
I wonder how they installed the gear in the first place ,normally they state a minimum of 5 feet above a gear to allow for repairs and to rig a chain tackle for re roping . I notice the C/W guide rails are not a standard type either , I wonder how old this lift was as I don't think it would pass modern building regulations .
+Keith Huddy Not passing building regs is probably the exact reason it was decommissioned and would have been too costly to bring it up to standards. An MRL would probably be an alternative, but it's not exactly a large lift and COST VS NEED means it won't happen anyway. I guess that guys installing an servicing such a lift would dread this place due to the restricted access. For me though... I love it!!
Ouh I was actually a bit scared you could fall down the shaft. Thank God nothing happened! I felt a bit dizzy "looking down the shaft" :D . Maybe they took of the wires in preparation for modernization at one day. So the question is, will the modernize it now or just leave it as it is....
+IDLift3000 But things like this give the lift a character that newer lifts could never have :) I'm really glad (and lucky) to get the opportunity not only to get into the building but to get into the LMR also??? Just HAD to film that :)
I have a video of me looking over a Horace Green & Co motor on a generic 1970's APEX lift in a tower block. Weird thing is that they were added 10+ years after the building went up. The building has a modded Express and the generic which were put in at different times.
Once they left the liftmachine room entrance door in my apartment building unlocked. I sometimes tried the door handle while waiting for the lift, and one day it was just open :D. Made some pictures and movie up there. Not much to see than a breaker box, control cabinet, a giant 2 meter long resistor, and the lift motor itself. Though i would be a bit scared if the floor was open like in this video! One little accident move and you'll fall to death..
+Richard van Pukkem Cool! I had a quick look on your channel hoping to find it, because your comment "not much to see other than a breaker box, control cabinet, giant resistors and motor" TO ME is something that I MUST see LOL!! Do you still have the photos/video? Yeah this motor room was a bit risky, but I like to think "the lift has character" and you wouldn't see this on a new lift - I love it!
+mrmattandmrchay I digged a bit into my Facebook photo history, and found the pictures again. Uploaded them here: imgur.com/a/gws6S/all No full picture of the giant resistor unfortunate. You only see a part of it on the left on the picture of the motor. :)
+stili774 "yes, i was up there trying to find the server room, i can only find analog equipment, have you considered the fact the Y2K bug scare ended 16 years ago?"
Good job with that excuse! I am going to have to remember to pay attention to directories from now as those could provide a good explanation for just being in the building, not even necessarily the motor room.
Facinating. Not my idea of a comfortable motor room. The motors that drive these ones seem so small! I am guessing it is three-phase 400v and not a DC one, but still - I've got a bigger motor on me disc sander. ;) ;) ;) Nice to see that they tucked the cabin and counterweight away neatly in the pit - not like that other one in one of your videos with the cabin at or near the top of the shaft and not lock or brake on it - THAT was a scary one....
+VauxhallViva1975 haha I like the comparison with your disc sander :D I did like that derelict lift you are referring to - the more scary the better for me! The lift in this video would probably be a single speed 415 motor.
I'm not sure exactly how they do it, but my best guess is they would lower the car into the pit, bracket the counter weight at the top, then somehow use the existing cables to lower the Counter Weight to the bottom of the shaft then remove the ropes.
Good question, apart from a few door switches and a bit of TLC I'm sure it would work if re-roped. If I owned the building, INDEED I'd try to get it running again :)
This whole place has been redeveloped. New flats instead of the old offices that existed here before. BUT, believe it or not, the lift hasn't been touched!!! It's still a derelict lift!
There is an elevator and extremly old one, at a church i never tried out, and its still around today! its been around since 1943 or so, it still has cables with it, and still its not (and maybe never) modernized!
I would have thought they would have put signs telling people that the lift is out of service, especially as they put a lot of effort into making it out of service and it would be replaced rather than fixed.
+Sam Sitar The fact the lifts been unused probably for many years means that nothings been changed or modded - Just the type of machine rooms I like :D
+Sam Sitar I agree with you. That motor room is so cramped that it would be a royal pain in the a** to work on anything within it, let alone that gaping hole to the shaft!
Thanks for the comment. Hopefully you'll find my next video funny, coming out during next week hopefully. I don't claim to be a comedian but I do try to inject a little humour into my videos where I can.
Actually, I've found this leads to more people coming up to you! When you look like you fit into an environment then people have less hesitation in asking you questions. Then, when you reply you have to tell lies and you end up 'digging yourself a hole'' as so to speak! Better to play innocent with "oh, I'm lost" or something. Just my experiences!
when the de-rope the lift do they let the counter weight or cab just drop down. they could lower the cab but then the counter would be at the top so do they just let it drop down the rails?
It fitted in nicely with the music though, the flashing part. But that was intentional. My second torch has even more "modes" - dim, half, full, flash fast, flash slow, and max. Really annoying keep having to go through all the modes to use the only one I'm ever going to use which is "max bright"!!
its also an illigal lift, dupar had to change the brake rods on these lifts because you could wind the adjustment on the unit and walk off, if you didn't know how to release trapped people, causing the lift to travel up vellly fast indeed. and going smack into the roof.
Actually, the building has been reopened as apartments. They've done a lot of work on the building, but in the back ground... the old derelict lift is STILL THERE!! Amazing as I thought they would have replaced it! If I go past there again in the near future then I will have another look, but it's not so easy to get in now.
Pickerings is a company that install lifts and I believe they also manufactured their own gear. From their website "At Pickerings Lifts, our history dates back over 160 years with experience in the installation, maintenance and repair of lifts, escalators, loading systems and mobility equipment." When a video is unplanned or unarranged, I blur anything that shows the whereabouts of the building for my own reasoning and experiences. Showing exactly where it is opens me up to things that I don't want to go into, which are irrelevant to the video and avoidable at time of editing. Mostly, I'm over-thinking this and it isn't a problem, but it's just something "I" do. Also, in the past I've had other youtubers "with no respect" producing copycat videos weeks later from ones I've just uploaded and no credit to me for finding it in the first place. I'm very respectful to other youtuber's videos, but some people are not.
Yeah, you made it sound like the object itself was just called a "pickerings." Okay, it would be interesting if you would explain those reasons you don't really want to go into, but if that makes you worry about your own security besides what you've already told me, then I can understand that. Why the quotation marks around "I"? Are you trying to say that you're not real?
Oh. Well, the way you said it, you made it sound like you were saying that just the switching equipment itself was called a "pickerings." Okay, so it would be nice if you were willing to go into more detail about the blurring than you did, but if you're worried about your own security, then I think I can understand that. But why did you just use quotation marks around the "I"? Are you trying to say that you're not a real person, or something like that?
What I mean is, anything anyone does in life is normally from their own personality or experiences. My specialist subject from my personality is "attention to detail". I put in a lot of effort with my editing, and I try to think of everything. Sometimes it's to protect myself or my channel, sometimes it's to make the video more interesting for my viewers. I'm always overthinking things, for example, "what if", "why don't I" or "what happens if...". I sometimes do a lot of unnecessary things like blurring the video "just in case of...". It's just my personality and editing style I guess. At time time, considering the circumstances of this visit I decided to blur everything. But bear in mind, the whole purpose of the video is the lift, the location is irrelevant. Hope that helps :)
+Jess Valenzuela Yep, looks like it, but the coffee could have been from the 80s or 90s I guess! I wouldn't want to taste it now if there was any left :)
I was going to send you both a PM with details, but cannot do so. RUclips says "Note: If a channel doesn't have a confirmed name on RUclips, it won't be able to receive private messages and you won't see the "Send message" button on the channel."
+mrmattandmrchay Oh, weird. I changed my user name recently from "David Irwin (passacaglia28)", to just "David Irwin". I believe I made this change using my Google+ account. Stupid Google. They went and made everything so complicated now.
That torch was bought off ebay. When I get around to doing my chernobyl q&a i will show you. I went to the US and bought an identical torch and it was noticeably brighter. Let me know if you are interested and ill give you an ebay link to one (uk version)
If only! But 99% of my lift tours are unplanned. I'm simply working in the area and I find something worth filming. So nothing is planned so it would make it impossible. Are you interested in lifts at all? Or just the adventure?
Wow, that looks WAY too dangerous for a lift motor room, with the open shaft and low ceiling and everything... Btw. that music is awesome, can you PM/email me the name of it?
How dangerous looks of this motor room... I'm sure what is this effect way old elevator since on this motor room? Why never used this elevator out of order until further notice???
How do you know it was condemned? When a lift is decommissioned, it is generally left in a safe state...ie immovable, then sealed off. Removing the ropes would be ridiculous. I can only assume this is being prepared for removal.
+Louis_J Ah, well this is my C2 Innovv car cam. It's ideal for discrete filming and love the wide angle, but I didn't have time to upload a config file that would have turned the time, date and my car registration off. So I had to leave the text on, then I managed to hide it on the editing (doesn't look too bad).
RUclips info.... Note: If a channel doesn't have a confirmed name on RUclips, it won't be able to receive private messages and you won't see the "Send message" button on the channel.
Keep in mind that this is an old lift motor room. Modern ones are different and are much more safety conscious. Moving machinery is almost always guarded with removable metal cages. As for live terminals, the relay logic cabinet is a cabinet, so the door is the protection (this one is missing the door). While all the health and safety is good, it’s not really necessary. Engineers would be trained to know what they’re doing, so it shouldn’t be necessary. It’s just accident prevention I suppose.
+Louis_J Thanks for your comment and I've not really researched this, so I've just googled it. Differences between youtube, as far as I can see, is people pay $3 per month to sub to channel, revenue might be better, and you can watch vids 72 hours before they are released to the public. But I cannot see how my channel can be any use on here, just wondering?
The wide angle of the camera appears to show a drop into the shaft just as you enter the motor room. Yes, you could fall down there, but in reality the gap isn't quite wide enough to "naturally" fall down. You'd probably get stuck in the gap before you fell down. But yes, I wouldn't have lived with myself if I hadn't taken this opportunity - a classic lift!!
I find it actually attracts more attention, then you immediately start 'digging yourself a hole' when you start lying with why you're there. In my experience, it's better not to. Just my experience though
Thanks! Really fits the video I think and I matched up the 'police siren' sound bit in the music with the torch. All these finishing touches that finish off the video :)
That motor room is extremely small. Must have been a pain for the lift engineers to work in such a confined space.
dykodesigns2yt I
Nowadays is even worse! They build MRL’s which are in closets!
They build the mothers and stuff on the roof then they put the walls and roof to the motor room I know because I’m an engineer
@@brako2744 another engineer, like me!;)
And yeah, that's true!
Many years ago I got the chance to enter 2 lift motor rooms, while working as a security guard. One of them was the opposite to the one in your video, as it was really spacious and brightly illuminated. It was in a high-rise building with 27 floors, and it housed 4 motors of 4 of the 5 lifts. I don`t remember much more, as it was my duty to take a look inside, once per night. But I do remember, that I was fascinated by the machinery!
The other motor room was in an older, 3 story building. The company I worked for didn`t use the third floor, it looked like the whole building was going to be tore down (as far as I know, it`s still there). Once per night, I had to check the deserted third floor for any unusual signs, as well as take a look in the motor room. The motor room was like the third floor: dirty, flickering lights, and a rather rusty machinery. The elevator used to malfunction at least once per week.
As I wasn`t an elevator fan, by then, I never took any pictures of the machine rooms. Wish I could go back and explore them some more, take some pictures and videos and share them with you all.
Thanks for your inspiring videos! My friends say I`m weird, cause I use to watch elevator related videos for hours ;)
I must say, I admire your bravery climbing up that maintenance 'room': seeing that elevator shaft popping up right next to the entry looked quite scary.
Had to be done :) Thanks for comment
elevatorsimulator more like maintenance cabinet
I wonder how they installed the gear in the first place ,normally they state a minimum of 5 feet above a gear to allow for repairs and to rig a chain tackle for re roping . I notice the C/W guide rails are not a standard type either , I wonder how old this lift was as I don't think it would pass modern building regulations .
+Keith Huddy Not passing building regs is probably the exact reason it was decommissioned and would have been too costly to bring it up to standards. An MRL would probably be an alternative, but it's not exactly a large lift and COST VS NEED means it won't happen anyway. I guess that guys installing an servicing such a lift would dread this place due to the restricted access. For me though... I love it!!
In order to comply with "modern" accessibility standards they will eventually need to spend they money required to "fix" it.
Ouh I was actually a bit scared you could fall down the shaft. Thank God nothing happened! I felt a bit dizzy "looking down the shaft" :D . Maybe they took of the wires in preparation for modernization at one day. So the question is, will the modernize it now or just leave it as it is....
+Michael “Mike i386” Roll shaft part worried me too.
it just need to be re roped
A compact lift machine room but WAY TOO compact!!
+IDLift3000 But things like this give the lift a character that newer lifts could never have :) I'm really glad (and lucky) to get the opportunity not only to get into the building but to get into the LMR also??? Just HAD to film that :)
+mrmattandmrchay This lift could have very easily been an MRL lift.
Lol you censored The timestamp and even yourself
Hi Indonesia
It's weird how im fascinated in Lifts but still scared of them
Also what was the song you used in the beggining?
+Haxisback Hi, sorry I cannot remember if I PMed you the music title already? Let me know if I didn't and I'll let you know.
mrmattandmrchay No You haven't
mrmattandmrchay I really like it how you actually take time to reply to people as much as you can :P
mrmattandmrchay Thank you i just got it! :D
Haxisback FINALLY SOMEONE WHO KNOWS HOW I FEEL
I have a video of me looking over a Horace Green & Co motor on a generic 1970's APEX lift in a tower block. Weird thing is that they were added 10+ years after the building went up. The building has a modded Express and the generic which were put in at different times.
+Aaron Burtt Have you considered uploading it?
mrmattandmrchay I lost it when my hard drive died. I will definitely record it again
Once they left the liftmachine room entrance door in my apartment building unlocked. I sometimes tried the door handle while waiting for the lift, and one day it was just open :D. Made some pictures and movie up there. Not much to see than a breaker box, control cabinet, a giant 2 meter long resistor, and the lift motor itself. Though i would be a bit scared if the floor was open like in this video! One little accident move and you'll fall to death..
+Richard van Pukkem Cool! I had a quick look on your channel hoping to find it, because your comment "not much to see other than a breaker box, control cabinet, giant resistors and motor" TO ME is something that I MUST see LOL!! Do you still have the photos/video?
Yeah this motor room was a bit risky, but I like to think "the lift has character" and you wouldn't see this on a new lift - I love it!
+mrmattandmrchay I digged a bit into my Facebook photo history, and found the pictures again. Uploaded them here: imgur.com/a/gws6S/all No full picture of the giant resistor unfortunate. You only see a part of it on the left on the picture of the motor. :)
Kone LCE equipment, probably a mod of an older elevator.
Car wash company with an office up a ladder in a tiny little old motor room 😁
HE is looking for the Server room :-) ;-)
LOL
+stili774 "yes, i was up there trying to find the server room, i can only find analog equipment, have you considered the fact the Y2K bug scare ended 16 years ago?"
LOOL
The emergency winding procedure requires two people. That'll make the room even more cramped!
+akaCol1987 Just two hands from one person is really enough actually!
Good job with that excuse! I am going to have to remember to pay attention to directories from now as those could provide a good explanation for just being in the building, not even necessarily the motor room.
Well! I've been introduced to a niche flavour of urban exploration and I must say that this is fantastic! :)
+koobydotnet haha! Cool, thanks.
What is the song called when you are going into the motor room?
Facinating. Not my idea of a comfortable motor room. The motors that drive these ones seem so small! I am guessing it is three-phase 400v and not a DC one, but still - I've got a bigger motor on me disc sander. ;) ;) ;) Nice to see that they tucked the cabin and counterweight away neatly in the pit - not like that other one in one of your videos with the cabin at or near the top of the shaft and not lock or brake on it - THAT was a scary one....
+VauxhallViva1975 haha I like the comparison with your disc sander :D I did like that derelict lift you are referring to - the more scary the better for me! The lift in this video would probably be a single speed 415 motor.
+mrmattandmrchay Scary lift video? Elisa Lam. But I digress....
So the car was lowered to the bottom and the cables removed as I don't see any remnants of a broken cable.
I'm not sure exactly how they do it, but my best guess is they would lower the car into the pit, bracket the counter weight at the top, then somehow use the existing cables to lower the Counter Weight to the bottom of the shaft then remove the ropes.
Was there any other issues that may have prevented this lift from working again (if it were reroped?)
Good question, apart from a few door switches and a bit of TLC I'm sure it would work if re-roped. If I owned the building, INDEED I'd try to get it running again :)
Wow. Sorry to see the lift is out of service and missing the ropes. Makes me want to get in there and get it running again!
This whole place has been redeveloped. New flats instead of the old offices that existed here before. BUT, believe it or not, the lift hasn't been touched!!! It's still a derelict lift!
There is an elevator and extremly old one, at a church i never tried out, and its still around today! its been around since 1943 or so, it still has cables with it, and still its not (and maybe never) modernized!
COOL! Sounds like a "must film" type of elevator?! ;)
mrmattandmrchay Yeah! ive been planning to!
I would have thought they would have put signs telling people that the lift is out of service, especially as they put a lot of effort into making it out of service and it would be replaced rather than fixed.
I love your voice and your style to make elevator, lift videos so keep going
Thanks very much! Loads more with my voice in the next video, which should be published tonight (taken me 2 months to edit it!)
if I were in your shoes probably could not leave the machinery room because i would be paralyzed with fear
+Foxy_The_Pooper Talespin!
COFFEE... What are the engineers doing?
that was good glad you got in the motor room very small never seen anything like it before
motor room looks very dangerous to me. very cramped. car top still looks functional.
+Sam Sitar The fact the lifts been unused probably for many years means that nothings been changed or modded - Just the type of machine rooms I like :D
+CWM030
Well he wouldn't want anyone to recognize him and potentially turn him in to the building owner now would he?
+Sam Sitar
I agree with you. That motor room is so cramped that it would be a royal pain in the a** to work on anything within it, let alone that gaping hole to the shaft!
Dark, cramped room, long way down, yeah I can't breath.
The building has been modernised but the old lift is still there! (still derelict though)
Yeah man
You make me smile when I am sad
Thanks for the comment. Hopefully you'll find my next video funny, coming out during next week hopefully. I don't claim to be a comedian but I do try to inject a little humour into my videos where I can.
Get yourself a yellow reflective vest and a clipboard. That usually stops people from asking you things.
Actually, I've found this leads to more people coming up to you! When you look like you fit into an environment then people have less hesitation in asking you questions. Then, when you reply you have to tell lies and you end up 'digging yourself a hole'' as so to speak! Better to play innocent with "oh, I'm lost" or something. Just my experiences!
when the de-rope the lift do they let the counter weight or cab just drop down. they could lower the cab but then the counter would be at the top so do they just let it drop down the rails?
I call this the worlds most dangerous motor room.
+Homeside Out Productions It was very small, but very cool - this is what I like about old lifts - full of character!
when are you making the klaxon siren videos?
I would never be able to do this looking down that shaft Gave me the feeling that made me want to fall over
You should have just said to thr guy "oh yah the manager knows me and i do youtube videos and today he let me see and come up here".
There I've thought that the first motor room was bad enough, but I was wroooong!
Why the pickerings company installed unsafe motor room ?
At 9:30 I have that same flashlight! I mean, torch. I often make it flash by accident too.
It fitted in nicely with the music though, the flashing part. But that was intentional. My second torch has even more "modes" - dim, half, full, flash fast, flash slow, and max. Really annoying keep having to go through all the modes to use the only one I'm ever going to use which is "max bright"!!
NO CABLES?! Well that sucks! Would be nice to see the ropes/ cables being installed back on the lift and get it running again!
Whats the music at 0:45 actually? tyvm :)
hi, send me an email and I'll send it to you mattw.youtube@virginmedia.com
What track is playing off and on throughout the vidoe??
coffee is in the "motor" room
its also an illigal lift, dupar had to change the brake rods on these lifts because you could wind the adjustment on the unit and walk off, if you didn't know how to release trapped people, causing the lift to travel up vellly fast indeed. and going smack into the roof.
Can you do a nostalgic video and come back here to check this lift again ?
Actually, the building has been reopened as apartments. They've done a lot of work on the building, but in the back ground... the old derelict lift is STILL THERE!! Amazing as I thought they would have replaced it!
If I go past there again in the near future then I will have another look, but it's not so easy to get in now.
Allright. good luck:D
Pickerings is just a _brand._
Why did you blur out one or more company names?
Pickerings is a company that install lifts and I believe they also manufactured their own gear. From their website "At Pickerings Lifts, our history dates back over 160 years with experience in the installation, maintenance and repair of lifts, escalators, loading systems and mobility equipment."
When a video is unplanned or unarranged, I blur anything that shows the whereabouts of the building for my own reasoning and experiences. Showing exactly where it is opens me up to things that I don't want to go into, which are irrelevant to the video and avoidable at time of editing. Mostly, I'm over-thinking this and it isn't a problem, but it's just something "I" do. Also, in the past I've had other youtubers "with no respect" producing copycat videos weeks later from ones I've just uploaded and no credit to me for finding it in the first place. I'm very respectful to other youtuber's videos, but some people are not.
Yeah, you made it sound like the object itself was just called a "pickerings." Okay, it would be interesting if you would explain those reasons you don't really want to go into, but if that makes you worry about your own security besides what you've already told me, then I can understand that.
Why the quotation marks around "I"? Are you trying to say that you're not real?
Oh. Well, the way you said it, you made it sound like you were saying that just the switching equipment itself was called a "pickerings."
Okay, so it would be nice if you were willing to go into more detail about the blurring than you did, but if you're worried about your own security, then I think I can understand that. But why did you just use quotation marks around the "I"? Are you trying to say that you're not a real person, or something like that?
What I mean is, anything anyone does in life is normally from their own personality or experiences. My specialist subject from my personality is "attention to detail". I put in a lot of effort with my editing, and I try to think of everything. Sometimes it's to protect myself or my channel, sometimes it's to make the video more interesting for my viewers.
I'm always overthinking things, for example, "what if", "why don't I" or "what happens if...". I sometimes do a lot of unnecessary things like blurring the video "just in case of...". It's just my personality and editing style I guess. At time time, considering the circumstances of this visit I decided to blur everything. But bear in mind, the whole purpose of the video is the lift, the location is irrelevant.
Hope that helps :)
hmm... there was coffe in the motor room?😂
+Jess Valenzuela Yep, looks like it, but the coffee could have been from the 80s or 90s I guess! I wouldn't want to taste it now if there was any left :)
Jess Valenzuela
Probably to keep the lift service worker from raging at the lack of space.
it must have been an elevator made by he Folgers coffee Co. -- Good till the last Drop
Nice video, love it.
if you could have any lift from any time installed in your home which one would it be. (i am asking every one please tag me your answer)
matthew gowens hi :/
DMR express lift DEFINITELY. Although, highly impractical for a two storey house, bloody cool technology to sit and stare at all day!
What music do you use on your intro. it sounds amazing
I agree!
I was going to send you both a PM with details, but cannot do so. RUclips says "Note: If a channel doesn't have a confirmed name on RUclips, it won't be able to receive private messages and you won't see the "Send message" button on the channel."
+mrmattandmrchay Oh, weird. I changed my user name recently from "David Irwin (passacaglia28)", to just "David Irwin". I believe I made this change using my Google+ account. Stupid Google. They went and made everything so complicated now.
...
What torch is that? That is bright!
That torch was bought off ebay. When I get around to doing my chernobyl q&a i will show you. I went to the US and bought an identical torch and it was noticeably brighter. Let me know if you are interested and ill give you an ebay link to one (uk version)
mrmattandmrchay Yes please, I'm guessing it's quite expensive!
Can i come with you on one the lift tours ?
If only! But 99% of my lift tours are unplanned. I'm simply working in the area and I find something worth filming. So nothing is planned so it would make it impossible. Are you interested in lifts at all? Or just the adventure?
@@mrmattandmrchay oh yes, definately. I have a passion for lifts since I was young, particularly the old ones
What song is that starting around 0:40 ? I really like it.
If you send me an email, I'll email it back to you. mattw.youtube@virginmedia.com
Wow, that looks WAY too dangerous for a lift motor room, with the open shaft and low ceiling and everything...
Btw. that music is awesome, can you PM/email me the name of it?
that was a good vid but i wonder how a lift engenire service the lift in that space
This motor room makes me claustrophobic. Minute 0:45 what song is?
u wont ever know buddy
we will never know
give up ur hope already, he wont reply
How dangerous looks of this motor room... I'm sure what is this effect way old elevator since on this motor room? Why never used this elevator out of order until further notice???
WHY did you try to censor the passengers on that one bus out the window? What did THEY have to do with anything here?
Because the advert on the side of the bus gives a massive clue to the whereabouts of the building
mrmattandmrchay why don't you give the whereabouts of the buildings
Artrix Bcz he doesn't want any children or teens to find this area and explore it like he did and get killed
The Caf Latte Remix is sooooooooo pleasingly good... especially that piano bit in the middle! :3
Am I the only one who noticed that the background music is made on 100% korg m1?
???? Do you have the name of the song?? Please tell me!!
@@fjdbnfdfdfd3701 no. But it is one of the demos that came with the m1 as far as I know
Does the building and the lift still exist
Great video, Thanks
Still no lift for this building ? the flats tenants must be happy !
Always the risk of getting cault with any urban exploration.
THATS BANG OUTA ORDER THAT IS
yup, that was actually quite funny XD
10:20 Hahaha, CarWash xD! Still laughing hardly :D!
This Lift,quite rightly Condemned,Either a major upgrade,or complete replacement.
How do you know it was condemned? When a lift is decommissioned, it is generally left in a safe state...ie immovable, then sealed off. Removing the ropes would be ridiculous. I can only assume this is being prepared for removal.
What was up with the blurred bar at the bottom
+Louis_J Ah, well this is my C2 Innovv car cam. It's ideal for discrete filming and love the wide angle, but I didn't have time to upload a config file that would have turned the time, date and my car registration off. So I had to leave the text on, then I managed to hide it on the editing (doesn't look too bad).
Yeah ok I agree didnt look to bad thanks for the reply
Scary and unsafe. Crazy.
Great video, I'm glad you didn't get caught. I also just Subscribed
cool, thanks for the sub :)
There was a lightswitch in the room!
Pls tell me the name of the music
Anyone know the name of the song in 0:50
I'll PM you
Hmmmm, can't see the SEND MESSAGE option on your page :/ I've had this before with other people.
RUclips info.... Note: If a channel doesn't have a confirmed name on RUclips, it won't be able to receive private messages and you won't see the "Send message" button on the channel.
I think these people should put more effort into lift machine rooms, like covering live terminals and machinery or adding circuit breakers.
Keep in mind that this is an old lift motor room. Modern ones are different and are much more safety conscious. Moving machinery is almost always guarded with removable metal cages. As for live terminals, the relay logic cabinet is a cabinet, so the door is the protection (this one is missing the door). While all the health and safety is good, it’s not really necessary. Engineers would be trained to know what they’re doing, so it shouldn’t be necessary. It’s just accident prevention I suppose.
Are you not scared that the wooden board would break
wy didant you turn on the light theres a switch on the wall
+Jorge Rocha That's the first thing I did at 1:05, but no lights worked up there, which is why I went back for a good torch :)
Wakey Wakey Jorge Rocha
You should put your channel on Vessel
+Louis_J Thanks for your comment and I've not really researched this, so I've just googled it. Differences between youtube, as far as I can see, is people pay $3 per month to sub to channel, revenue might be better, and you can watch vids 72 hours before they are released to the public. But I cannot see how my channel can be any use on here, just wondering?
Yeah I use it and thought your channel would be a good addition but anyway dont worry :)
Wow, you really take your passion seriously. Leaning over a shaft that could lead to your death to see some machinery, I would've frozen in fear xD
The wide angle of the camera appears to show a drop into the shaft just as you enter the motor room. Yes, you could fall down there, but in reality the gap isn't quite wide enough to "naturally" fall down. You'd probably get stuck in the gap before you fell down. But yes, I wouldn't have lived with myself if I hadn't taken this opportunity - a classic lift!!
hope they will fix it
Whole building has been refurbished - old derelict lift is still there, untouched! I thought they'd at least blank it off!
What's the name of the song please?
Is it in RUclips audio library?
Subbed and hit that bell!
cool, thanks !
Anytime! :)
How did they people trying ride this elevator works??? Pretty old motoring like 1960s/70s for classic elevator isn't.
+Andrew Wallford Andrew, please try bear with him leave them ok?
Sorry, darling!!!
+Andrew Wallford xD why and how
Did this lift have no stupid inner doors
I guess it didn't, but cannot confirm
Looking at the shaft I think it didn't have inner doors originally unless it had a gate
I love this channel. Insta-subbed
Cool, thanks :)
Nice place to put a fm transmitter!
+MrVinamp ayy lmao
can you please tell me what a fm transmitter is
i googled it but i want to hear it out of your alien mouth
+Sonnenmann8 Pirate Station
@@Sonnenmann8
Douche?
Music name anyone?
I sent you a PM
What’s the music
Wrote i remember the video with the old Pickerings!
I am talking about the song when you sneak upstairs.
+Royann Greenwood I'll send a PM
+mrmattandmrchay thank you.
+mrmattandmrchay I enjoy those type of synth songs of sneaking around, it's gonna be used for a movie project.
Wear a high vis jacket, clipboard and toolbelt no one will challenge you they'll assume your maintenance
I find it actually attracts more attention, then you immediately start 'digging yourself a hole' when you start lying with why you're there. In my experience, it's better not to. Just my experience though
Lol can't stop laughing at the end bit 😁😁
Porably the lift name is Pickerings lift.
The elevator is OUT OF ORDER... beacause the rope fall out from the machine?
No.
(I Think)
The ropes were cut because the lift is derelict.Maybe vandalism? Or maybe the elevator had a problem and is therefor put out of order?
Do you think that we can fix it?
You should of put some 007 music from the Nintendo 64 game that would of also been ace
And then he drops his camera or flashlight
Mad recpect lucky for ya you had guts
that guy doesn't own the building
Nice!
i like your videos
+WilliamsAddictionz And I like your comment :) Thanks for that and glad you like them. Which country are you from?
I live in the us mishagan
I dare you to do this at 3 am
The strange thing is, I probably would LOL. Anything to film the stuff that interests me (and hopefully everyone else also!)
I love the music:)
Thanks! Really fits the video I think and I matched up the 'police siren' sound bit in the music with the torch. All these finishing touches that finish off the video :)
@@mrmattandmrchay What is the name of the music?
ok
But did you find the car wash company? hahahah
+IscleGaming | ZefaCraft Yes - but it moved address :D