Before becoming a Boilermaker welder I did truck body building for a few years and I learnt over time I could pull frames into square with correct welding sequence, not needing any clamps or fixtures. This video is a good representation of that.
I'm brand new to TIG welding and never knew this was an issue. Thanks for teaching it and pointing out how to overcome the issue. Like another gentleman noted, it appears proper weld sequence is key to proper fit up. Thanks for the class.
Excelente video. Estoy muy agradecido por su dedicación a explicar está problemática. Espero pronto pueda explicar lo mismo sobre caños cuadrados. Saludos desde Argentina.
Excelente tutorial maestro, buenos consejos y mejores demostraciones, como es costumbre en sus videos, gracias por compartir sus conocimientos y experiencias, un saludo cordial y por supuesto un gran like desde Narón (Galicia) 👌🤓
Before becoming a Boilermaker welder I did truck body building for a few years and I learnt over time I could pull frames into square with correct welding sequence, not needing any clamps or fixtures. This video is a good representation of that.
I'm brand new to TIG welding and never knew this was an issue. Thanks for teaching it and pointing out how to overcome the issue. Like another gentleman noted, it appears proper weld sequence is key to proper fit up. Thanks for the class.
i don't speak korean but just watching the video i can understand, your dedication and enthusiasm deserve to be honored, thank you from my heart
Excellent demonstration. Thank you.
Спасибо за хороший урок и интересный подход к работе. 👍
Очень хорошо показано и рассказано. Спасибо. Быстро, четко, понятно.
Nice video.
You explained and showed it very well.
Outward welding it is !!!! Who would have thought that. Thank you, all very intriguing. !
As usual, good stuff bro!!
Very good video. As always
Very good. Thank you!
Excelente video. Estoy muy agradecido por su dedicación a explicar está problemática. Espero pronto pueda explicar lo mismo sobre caños cuadrados. Saludos desde Argentina.
Deformações na soldagem é algo muito difícil de lidar.
Ótima aula meu amigo, parabéns!
Excelente tutorial maestro, buenos consejos y mejores demostraciones, como es costumbre en sus videos, gracias por compartir sus conocimientos y experiencias, un saludo cordial y por supuesto un gran like desde Narón (Galicia) 👌🤓
Super merci de dévoiler tous ses petits secrets .
Merci
Nice
Thank you so much !
이제까지 전체적인 용접 순서만 신경을 썼는데 용접 방향도 변형에 차이가 많이 나네요. 오늘도 많이 배웠습니다. 감사합니다.
Thank you, Very informative Video
오늘도 유익한 영상 감사합니다^^~
현장에서 유용하게 쓰일 내용이네요 정말 감사합니다 또 배우고 갑니다
Nice welding.
EXCELENTE VIDEO¡¡... SALUDOS DESDE MEXICO¡¡
Спасибо 👌
Sangat bagus 👍👍
Vielen Dank! Super erklärt!
마님파이브에서 추천해서 왓어요
Перевод / надпись на экране надо сделать верху / чтобы было лучше видно видео контента.
사각형 물건 용접시 결과적으로 90도가 되게 끔 하는 방법도 제일 하기 쉬운게 ㄴ자용접을 안쪽방향으로 해서 예각을 만든뒤 두들겨서 90도 만드는데 정석이죠.다만 두들길때도 요령이 필요하며 시아게 후 도장한다는것이 전제로 필요하죠.
Dame la saga
good
你好我的朋友,你能解释一下方管上的这种方法以及如何在实际应用中避免这些扭曲吗
Nǐ hǎo wǒ de péngyǒu, nǐ néng jiěshì yīxià fāng guǎn shàng de zhè zhǒng fāngfǎ yǐjí rúhé zài shíjì yìngyòng zhōng bìmiǎn zhèxiē niǔqū ma
👍👍
👍👍👍👍👍👍👍👍
Please show me how to weld titanium
예상치 못한 결과이네요 파이프 엘보용접시 안쪽으로 변형되는데 예방방법 좀 부탁드립니다.
外角填料也必須銳角填料量的兩倍 否則角度 也會跑掉
I know it,
지금 사용 하신 용접기에는 스폿기능을 위한 별도의 스위치가 없는것 같던데요 스폿 기능처럼 사용 하려면 어떻게 해야 할까요
液体有张力,尤其是热液体,哪头先加热那么它将决定最后的角度偏差
Hello
👍👍👍👍👍👍👍👍👍👍👍
변형은 정말 저를 힘들게 괴롭히죠
А если варить от центра в две стороны?
사기꾼 약장수 목소리.
딱 지 프로필 사진처럼 노네
수준 떨어집니다 행님!