This is great project indeed, very helpful, more strength to ur ideas. I suggest if you can add Google Map address and location, this project can be used as car tracker which can make it more useful for ur fans, especially me.
@@AhmadLogs yes it requires GPS module through which will get the geo location and you will now encode it in google like and send as message to the user.
@@ezeoluchukwu5104 It will possible. but the arduino program memory is limited. my code used 55% of memory. If it use gps, then the code becomes more bigger, and then, it required more memory. I am afraid if the arduino uno can handle it. but I will try
Hello Ahmad Khan I had a program with Fona Library that I tried to combine your good program with my own program In the meantime, I notice that the way to introduce rx & tx pins in the fucking fona library is the opposite of the sim800 library. Finally, I succeeded. Thank you again Good luck 👌
Excellent, like all projects I finished the gps project with sim800l and m-6gps module, with the help of your projects, of course i went the eeprome another way
@@AhmadLogs It is a car alarm, which opens and closes the car door, and uses GPS, and when the car door is opened, vibrates the car, sends SMS, and beeps, and flashes, and The switch relay has a gas station, and works with DTMF, and sms, and the sound inside the cabin can be heard.
@@AhmadLogs is it possible to use the analogue entrances out and what is the function of string phone at the beginning of the code we are not supposed to record the numbers with a message i mean the 5 numbers and therefore the number used sends and receives the situation as well
Excellent project sir. Sir can you add eeprom function in your previous gsm home automation in which you added push buttons and IR including LCD or OLED to show relay status as well.
@@AhmadLogs I mean, can I add more than one exit to control more than 4, and when I add a motion sensor, I need to control it with a message in the sense that while I'm inside the house, I control the suspension and operation of sensors, and I'm inside the house, not the sensors, and I'm out of the house doing the motion sensors.
Dear, I have a question that, there is no Phone number used in your program so how can serial monitor show your phone number's ? please give me a proper solution for this issue.
the phone numbers are stored in the eeprom. and we will store the phone numbers by sending sms. for example if you send "R" (without double quotation marks) from your mobile phone. and the phone number will be registered and stored at location 1. the same way you can register more phone numbers. to register phone number 2, you will send r2=+923001234567 (enter your own phone here) from your phone. and it will store on location 2. you must need to watch this ruclips.net/video/OJcGY4ySs4o/видео.html
Hi Dear .... this is a grate project but for me does not work , i don`t know why........every thing is o.k but did not response by sms in serial monitor show to SMS sent Successful but did not receive any SMS from Module
Mr Ahmed thank you very much for sharing I am null in arduino and I followed your advice step by step and the connection diagram and I downloaded the code without problem and I modified the number of the gsm but the messages do not arrive and nothing happens .
Very useful project . One request... I want relays statuses also stores in EEPROM. so hence to resume the relays when power comes back.. Please do this for me Thanks in advance ❤️
please i love you project am in ghana how can edit the code to suit me because i have try but not working please help i have scribe your channel i real love your project
Hi Ahmad ,I am so glad to hearing about new project and I want tell you about EEPROM ,I think if you use update for register for replace is better than write to that .you thing so? And if add 2 input digital foe pir sensor and read temp or any digital device could be better this project.regards
@@AhmadLogs yes if we use write command every time eeprom after 10000 time use ito be unsed but if we use update commad after regester on number we coul save Avr life for many time use.
@@rampage_xdit great. I know the eeprom limit for 10000 already. but I did not know about the solution for this. thanks for sharing this precious knowledge. I will consider it in my next eeeprom projects. and will try to update the code for this video also. thanks again.
which RST pin you are talking about? Arduino RST Pin or SIM800L RST pin? I have tested the same with 1k resistor and bc547 transistor between digital pin 4 and rst pin of sim800l
excellent project bro. really impress with you project. Btw, can you share the code project w/o relay coding? cause i just want coding for register phone number by sms. pleaseee hehe
@@AhmadLogs bro i got problem with your coding. i copypaste and follow all your step but when I send R on gsm, on my serial monitor only show 13:31:38.772 -> +CMT: "+XXXXXXXXXX","","22/01/11,13:31:33+32" 13:31:38.772 -> R why Can't Register? i already changed GSM, ARDUINO Board, Antenna.
@@arezadeyn311 if you have already register a number, then you cannot use R command anymore. first delete all the registered phone numbers. by sending "del all"command. and then send R command again
Hello Ahmed Khan. I have a problem with the execution. No commands are executed and I can't even see the list of declared numbers in the serial monitor properly or delete them to create a new number. Please help. Thank you very much for your time. 19:09:59.366 -> Arduino serial initialize 19:09:59.366 -> SIM800L software serial initialize 19:09:59.366 -> List of Registered Phone Numbers 19:09:59.366 -> 1: ⸮⸮⸮⸮⸮⸮⸮⸮ 19:09:59.366 -> 2: ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮ 19:09:59.366 -> 3: ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮ 19:09:59.366 -> 4: ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮ 19:09:59.366 -> 5: ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮
Mr.@@AhmadLogs i tried it on gsm 900 but i dont get any respond from gsm. It shows the number I added in serial monitor but i didnt received any confirmation. Also, it didnt add to the list of phone numbers. By the way thank you for your respon Mr.
I wanted to repeat your project to study sim800 , the number registration is successfully written the command is received and displays on the port monitor . but not one relay does not work and there is no return sms message
How are you my friend I hope you are fine the program works with me well but after I add a sensitive that works well also but when you add more than 5 sensors starts to lose some features such as sending the case what do you expect what is the problem is the large program may be the reason
@@AhmadLogs Why is the stat sent to only one number which is registered in the program is not the number to send the stat is the one sent by the Arduino replay means so 5 numbers if sent by the stat is not a message in the state of the rilai is that true or I understand wrong
@@ahmedtaher4015 the stat is sent on the sender phone number, only if the phone number is stored in the eeprom. it will not send state to all the phone number stored in the eeprom
According to your suggested component and devices bought. Online and doing same process. As you have done in videos. But i am not getting any responses. From project plz do help some for me..
@@AhmadLogs I use an arduino uno type SMD, the power supply is only from usb, & the battery is 3.7v. when the relay is turned on the lights go on. then sms doesn't work
@@republikbasecamp relay required more power. so use a 5v power supply. connect the power supply vcc pin to Arduino 5v pin and relay vcc pin. that's all
I want to ask question regarding SMS alert, here the condition is that at the Arduino+800L module end , I want to receive a alert SMS only for one time on my mobile , but in mayproject I placed switch with door at Arduino end , Now I received multiple SMS till door open ,I want to stop more than one SMS What coding will need to stop extra SMS
you need a variable such as boolean send_sms = 0. when the door is open. check if(send_sms == 0) { send_alert(); send_sms = 1; } this way you can send alert single time when the door is open
Essalamo alikom... Brother. Great job.. Thanks.. But the code not working with me... I have nano 328P... Please where's the problem? Thank you so much for your help
Now I downloaded the code and the seral montor gave me the same as you, but when I send r and it does not send me anything And when sending A1 also the same problem does not happen any action. What is the problem?
@@AhmadLogs dear sir, I need one more code, I am used sim 800l and Arduino nano board to control by relay, and I am used Normally Open type contact dry run sensor, and fixed to motor delivery pipe, When on the relay motor is running but need some time delay to water delivery out, when touch water to sensor going to Nc, the motor is running continuously, if water did not come out after time delay sensor will deactivate the motor, Sir, I need the code for dryrun, thanks
There is a big problem about sim800l board for iphone users.When i send message from an android device, there is no problem. But when i try to register my İphone, it does not work.Because iphone adds 4 letter unknown prefix to our sms.Have u ever faced with this problem?
sar qua Arduino ko realy bord&gsm bord Jodne ke bad coad me sms karnevala namber dalneke bad upload karne ke bad sms kiya to Work karega? Send me anser sar ? In hindi
Hi Sir, it's not working... While I send 'R' comment to the module no response from the module. And also for all msg's no response and relay doesn't on
I m getting square blank boxes on start up of serial monitor at registered phone numbers location. When I send r , it shows only ok in serial monitor Neither it sends Registration SMS nor it shows in serial monitor that the number is registered.
i made the project and upload the code as it is but it does not reponding it only showing empty list of number not reponding even a single sms can you please help me sir
@@AhmadLogs apka jo hai mujhe ye project banana hai lekin mein ye kaise banau 2g sim kaha se lau 4g 3g sim hai but 2 g kaise lau koi idea hai apke pass
Aoa, Tauseef Bhai I m not getting list of registered on serial monitor as well as on my mobile phone. I'm using Sim800c GSM Module for this test. The same module sends SMS & miscalls to my mobile phone using your fire alarm code for Sim800L module. Can you please check & confirm that the above code for mobile number registration is working ok at your end or does it need some changes. Preferably if I get your email address so I can share the serial monitor screen shot to you for better understanding of the problem I m facing. Thanks & kind regards.
@@AhmadLogs I m getting square blank boxes on start up of serial monitor at registered phone numbers location. When I send r , it shows only ok in serial monitor Neither it sends Registration SMS nor it shows in serial monitor that the number is registered. I will check the eeprom & will update you. Kind regards.
@@AhmadLogs Ok, meanwhile I have tested the code with a new ATMega328 controller to confirm the eeprom. But getting the same result. Will be waiting for the modified code from you. Kind regards.
I face a issue in this project I cannot change the text message for my convenient for eg: i want to change "a0" instant of" light1off " the code does not work properly Another one is more than 50 message received by simcard 51th message has not received in it Please fix this
1. make sure all the letters of "light1off" must be in lowercase (small letters. 2. for auto delete sms add the following line of code at the end of line number 402 sim800.print("AT+CMGD=1,4 ");
Mr Ahmed Bohat mehnati Hain ap my best regards for u
Allah pak bless you bro .v informative videos
This project 👌.Make 16 relay module version its more useful to us thank you 😊
This is great project indeed, very helpful, more strength to ur ideas. I suggest if you can add Google Map address and location, this project can be used as car tracker which can make it more useful for ur fans, especially me.
I think it required gps module to integrate with this project. nice idea, I will try it.
@@AhmadLogs yes it requires GPS module through which will get the geo location and you will now encode it in google like and send as message to the user.
@@ezeoluchukwu5104 It will possible. but the arduino program memory is limited. my code used 55% of memory. If it use gps, then the code becomes more bigger, and then, it required more memory. I am afraid if the arduino uno can handle it. but I will try
@@AhmadLogs okay I am waiting
Hello Ahmad Khan
I had a program with Fona Library that I tried to combine your good program with my own program
In the meantime, I notice that the way to introduce rx & tx pins in the fucking fona library is the opposite of the sim800 library. Finally, I succeeded.
Thank you again
Good luck 👌
So nice of you
Excellent, like all projects
I finished the gps project with sim800l and m-6gps module, with the help of your projects, of course i went the eeprome another way
thanks. can you please give me some details about your project. I just want to know
@@AhmadLogs It is a car alarm, which opens and closes the car door, and uses GPS, and when the car door is opened, vibrates the car, sends SMS, and beeps, and flashes, and The switch relay has a gas station, and works with DTMF, and sms, and the sound inside the cabin can be heard.
@@saeidpourafshar4824 hmmmm. very nice. and it required lot of hard work.
@@AhmadLogs From another rush, I can save my phone number in eeprom, and with one call, and hang up
@@AhmadLogs From another rush, I can save my phone number in eeprom, and with one call, and hang up
Hello Ahmad Khan
I do not know how to thank you for your good plans
Thank you very much
🙏🏻👏👏👏
thanks you too
Mr. Ahmed i love you great idea i have many thanks about all tutorial video
You are most welcome
Great sir nice tutorial. Many thanx
You are most welcome
Hi man! i just wanna tell you you are so awesome greetings from argentina
thanks
Thanks for fulfilling my request.
Awesome.
Any time
Thank you so much for your effort
Thank u for this project... Lot learn..
so nice of you
Amazing. Great Thanks Ahmad bro. ❤👍 I subscribed.
thanks
You are so talented and amazing!
Thank you so much!
Wow great Dear ❤️❤️ nice working and great project
thanks
Thanks. Great useful project
Glad you liked it!
bhai jaan
nice product
thanks
is the number used to send string phone must be among the 5 registered numbers and it can not be any number
it can be any
@@AhmadLogs is it possible to use the analogue entrances out and what is the function of string phone at the beginning of the code we are not supposed to record the numbers with a message i mean the 5 numbers and therefore the number used sends and receives the situation as well
this project is very good, please make it with additional manual button switch, thanks
will try
Excellent project sir. Sir can you add eeprom function in your previous gsm home automation in which you added push buttons and IR including LCD or OLED to show relay status as well.
thanks/ Will try
Nice explanation...👌 Bro... please make relays control on upi payments with GSM based.
Unfortunately, I don't have any idea about upi payments . can you please explain
@@AhmadLogs ruclips.net/video/4luvFyzH9Gk/видео.html this type of upi payments
Cool❤
Nice thanks for this video
Most welcome
Nice project 👍👍
Glad you like it
A great and practical project can you add more than four reai and can you add the motion sensor and control its operation with a message
please give me some more details
@@AhmadLogs I mean, can I add more than one exit to control more than 4, and when I add a motion sensor, I need to control it with a message in the sense that while I'm inside the house, I control the suspension and operation of sensors, and I'm inside the house, not the sensors, and I'm out of the house doing the motion sensors.
@@ahmedtaher4015 very practical idea to implement. it is possible and can be implement in Arduino. so, I will definitely work on it
@@AhmadLogs ok iam waiting
Dear,
I have a question that, there is no Phone number used in your program so how can serial monitor show your phone number's ?
please give me a proper solution for this issue.
the phone numbers are stored in the eeprom. and we will store the phone numbers by sending sms. for example if you send "R" (without double quotation marks) from your mobile phone. and the phone number will be registered and stored at location 1.
the same way you can register more phone numbers. to register phone number 2, you will send r2=+923001234567 (enter your own phone here) from your phone. and it will store on location 2.
you must need to watch this ruclips.net/video/OJcGY4ySs4o/видео.html
Super
thanks
Hi
I want to use Arduino Mega in this project, but it is not supported in GSM 800l serial monitor.
Hi Dear .... this is a grate project but for me does not work , i don`t know why........every thing is o.k but did not response by sms in serial monitor show to SMS sent Successful but did not receive any SMS from Module
use "ATE1" command in setup() function and let me know
how to use "ATEI" comand
pls help me
Execellent project sir, Sir can it be possible to send calls to different phone numbers at once?
yes,
@@AhmadLogs Sir can you make a video about how to send multiple calls at once, it's very important. Bcz there are no more videos on this topic.
@@anthonykishan3975 ok will try.
@@AhmadLogs Thanks Sir, take love from Bangladesh. ❤
Mr Ahmed thank you very much for sharing
I am null in arduino and I followed your advice step by step and the connection diagram and I downloaded the code without problem and I modified the number of the gsm but the messages do not arrive and nothing happens .
you said " I modified the number of the gsm".
not enter the gsm module number. enter you personal phone number in the code.
Good project
thanks
Is cod me sir 1 pin pir moson sensor add plesae antithief ke liye
Very useful project .
One request...
I want relays statuses also stores in EEPROM. so hence to resume the relays when power comes back..
Please do this for me
Thanks in advance
❤️
Ok I will try
please i love you project am in ghana how can edit the code to suit me because i have try but not working please help i have scribe your channel i real love your project
Hi Ahmad ,I am so glad to hearing about new project and I want tell you about EEPROM ,I think if you use update for register for replace is better than write to that .you thing so? And if add 2 input digital foe pir sensor and read temp or any digital device could be better this project.regards
Thank you, unfortunately I did not understand properly. can you give me some more details
@@AhmadLogs yes if we use write command every time eeprom after 10000 time use ito be unsed but if we use update commad after regester on number we coul save Avr life for many time use.
@@rampage_xdit great. I know the eeprom limit for 10000 already. but I did not know about the solution for this.
thanks for sharing this precious knowledge.
I will consider it in my next eeeprom projects. and will try to update the code for this video also.
thanks again.
@@AhmadLogs many thanks for your nice project and go ahead with hi power you are best.
hi, i want to add DHT 11 into this project how can i do
You are the best in RUclips brother ahmed can you add to this project call please ...your brother from Algeria
will try soon
Hello Sir,
Can I connect 1K resistor and BD137 Transistor between Digital 2 and RST pins sir. Will it work fine sir
which RST pin you are talking about? Arduino RST Pin or SIM800L RST pin?
I have tested the same with 1k resistor and bc547 transistor between digital pin 4 and rst pin of sim800l
excellent project bro. really impress with you project. Btw, can you share the code project w/o relay coding? cause i just want coding for register phone number by sms. pleaseee hehe
yes, it might be done. why don't you do it yourself
@@AhmadLogs bro i got problem with your coding. i copypaste and follow all your step but when I send R on gsm, on my serial monitor only show
13:31:38.772 -> +CMT: "+XXXXXXXXXX","","22/01/11,13:31:33+32"
13:31:38.772 -> R
why Can't Register? i already changed GSM, ARDUINO Board, Antenna.
@@arezadeyn311 if you have already register a number, then you cannot use R command anymore. first delete all the registered phone numbers. by sending "del all"command.
and then send R command again
Sir maine ek coading ki h isme AT command run nhi ho rahi AT OK likha nhi aa raha uski jagah questions mark aa rahe h
sir how to do this as a bike anti theft with gps module
Hello Ahmed Khan. I have a problem with the execution. No commands are executed and I can't even see the list of declared numbers in the serial monitor properly or delete them to create a new number. Please help. Thank you very much for your time. 19:09:59.366 -> Arduino serial initialize
19:09:59.366 -> SIM800L software serial initialize
19:09:59.366 -> List of Registered Phone Numbers
19:09:59.366 -> 1: ⸮⸮⸮⸮⸮⸮⸮⸮
19:09:59.366 -> 2: ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮
19:09:59.366 -> 3: ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮
19:09:59.366 -> 4: ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮
19:09:59.366 -> 5: ⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮⸮
same problem
Thank you for the vid Mr. Amhad. I have a question, thus this code work also on GSM shield like GSM 900? Thank you sir!
Yes, It should work
Mr.@@AhmadLogs i tried it on gsm 900 but i dont get any respond from gsm. It shows the number I added in serial monitor but i didnt received any confirmation. Also, it didnt add to the list of phone numbers. By the way thank you for your respon Mr.
Other question Mr. Amhad, how should be able send messages to the list phone numbers?
Sir isme current sensor aid kardona 4realy mese koi 1realype load jyada ajaye to 1realy off ho jaye or Ripley massage aajaye over current ka
will try
I wanted to repeat your project to study sim800 , the number registration is successfully written the command is received and displays on the port monitor . but not one relay does not work and there is no return sms message
you can use the serial.print command to debug the project
Hello sir, can i use arduino nano in this source code?
Bhai Jan relay ko starter mode me activate karne ke liye kya karein when command send on only 5sec on after go off
watch this ruclips.net/video/zB0qxa_sjTQ/видео.html
Frind idid but in the code not writen any phone i sent R ـbut why not registert need in the code write 5 phone number?
Sar is code ko mobile se kaise upload Karen
Koi to upay bataye
Aapka Jo eeprom wala project hai vah sabhi bahut hi achcha hai
use ArduinoDroid App from PlayStore
Writen the phone number nt registerd what i do but in the code not write phone number
how to attach dht11 sensor to it
How are you my friend I hope you are fine the program works with me well but after I add a sensitive that works well also but when you add more than 5 sensors starts to lose some features such as sending the case what do you expect what is the problem is the large program may be the reason
I am fine thank you.
arduino sometimes is unable to handle large and complex programs. you might use esp32
@@AhmadLogs Why is the stat sent to only one number which is registered in the program is not the number to send the stat is the one sent by the Arduino replay means so 5 numbers if sent by the stat is not a message in the state of the rilai is that true or I understand wrong
@@ahmedtaher4015 the stat is sent on the sender phone number, only if the phone number is stored in the eeprom. it will not send state to all the phone number stored in the eeprom
@@AhmadLogs yes i'm sorry i'm wrong i'm so sorry
Gsm based home automation project ready made available ahe ka
yes
According to your suggested component and devices bought. Online and doing same process. As you have done in videos. But i am not getting any responses. From project plz do help some for me..
tell me the issue
I wish to tray..good channel..iam subscr.
Thanks and welcome
@@AhmadLogs
I use an arduino uno type SMD, the power supply is only from usb, & the battery is 3.7v. when the relay is turned on the lights go on.
then sms doesn't work
@@republikbasecamp relay required more power. so use a 5v power supply. connect the power supply vcc pin to Arduino 5v pin and relay vcc pin. that's all
@@AhmadLogs sim800 blink 1s, AT comand kode unik...,, my projek no work
@@republikbasecamp its mean your sim card is not registering to the network. only 2g sim card will work.
Please make node mcu sim800l and blynk gps tracker. I have been requesting you since ages sir
hmmmmmmmm.... I am going to start working on it.
Hi bro now my phone registerd in serial moniter but not answer why?
Please must the sim card be registered ?
Can 3g or 4g simcard work
only the 2g sim card will work. and the sim card must be activated.
What problem sir,i done try this coding in my PCB whit IC atmega 328p can't work for register number..
you might watch it. ruclips.net/video/OJcGY4ySs4o/видео.html
@@AhmadLogs Ok sir
I can try again..
Tks for your respons.🙏
bhai aap bnaay
dtmf or sms control relay
with registration numbers
this is the same video. only missing feature is DTMF
please send me Gmail address
i am send the code file
mere pass aik code file hay os ma kuch code aap k next project dtmf and sms. with after reply sms all delete.
all load relay status save in eeprom
@@AhmadMehraGoharI will try it.
I want to ask question regarding SMS alert, here the condition is that at the Arduino+800L module end ,
I want to receive a alert SMS only for one time on my mobile ,
but in mayproject I placed switch with door at Arduino end ,
Now I received multiple SMS till door open ,I want to stop more than one SMS
What coding will need to stop extra SMS
you need a variable such as boolean send_sms = 0.
when the door is open. check
if(send_sms == 0)
{
send_alert();
send_sms = 1;
}
this way you can send alert single time when the door is open
@@AhmadLogs thanks you are great 🌹🌹🌹
Did you solve the problem and could you share the code. i could use it ;-)
Essalamo alikom... Brother. Great job.. Thanks.. But the code not working with me... I have nano 328P... Please where's the problem? Thank you so much for your help
can you please explain the issue in detail
@@AhmadLogs When I send the letter R..there is no reply
@@saadelm2955 what about the serial monitor. tell me the serial monitor output
@@AhmadLogs hi ahmed.. The code is working thanks.. How do we maintain the condition of the relay in the event of a power outage and its return?
@@saadelm2955 good question. I suggest use sd card to store the state of relays. you might use EEPROM, but it is not good idea.
Now I downloaded the code and the seral montor gave me the same as you, but when I send r and it does not send me anything And when sending A1 also the same problem does not happen any action. What is the problem?
It mean your phone number is not registered by send r command.
tell me the output of serial monitor when you have send the r command
Why my number is not registering?
My problem is that
Sir, sim800L how to get the current date and time? How to make the code for AT+CCLK? , pls add the code for me thanks
I am not sure. but I will try if it is possible
@@AhmadLogs dear sir, I need one more code, I am used sim 800l and Arduino nano board to control by relay, and I am used Normally Open type contact dry run sensor, and fixed to motor delivery pipe,
When on the relay motor is running but need some time delay to water delivery out, when touch water to sensor going to Nc, the motor is running continuously, if water did not come out after time delay sensor will deactivate the motor,
Sir, I need the code for dryrun, thanks
can you add call option to this project and status command also ?? please
check this ruclips.net/video/Hq1ZGWWc0e4/видео.html
There is a big problem about sim800l board for iphone users.When i send message from an android device, there is no problem. But when i try to register my İphone, it does not work.Because iphone adds 4 letter unknown prefix to our sms.Have u ever faced with this problem?
yes, you are right. I never test it for iPhone.
@@AhmadLogs Can u please test it for me and let me know after you done?
@@alperkaplan5400 I must give it a try. but I don't have iPhone
I did not register my number plz help me
If i want add some phone numbers, how must wrriten in code?
you can add five phone numbers in the project. are you want to add more?
sar qua
Arduino ko realy bord&gsm bord Jodne ke bad coad me sms karnevala namber dalneke bad upload karne ke bad sms kiya to
Work karega?
Send me anser sar ?
In hindi
no
Когда отправляю сообщение с буквой R мой номер не регистрируется что сделать
Nice projects 🤝
Can you help me. Please 🙏
In my country now will developing so that I want learn technology
Send this circuit and coding, I want try 🙏
ok
check code link in the video description
Hi Sir, it's not working...
While I send 'R' comment to the module no response from the module.
And also for all msg's no response and relay doesn't on
what output in serial monitor
I m getting square blank boxes on start up of serial monitor at registered phone numbers location. When I send r , it shows only ok in serial monitor Neither it sends Registration SMS nor it shows in serial monitor that the number is registered.
check version 3 of the project.
@@AhmadLogs what is the title of the version 3 of this project sir?
What a good project !!
Ok
Code doesn't work for us.
Please help us.
what is the led status of your sim800l gsm module.
@@AhmadLogs I'm not talking about the state of the led.
In fact when I compile the program it reports errors and it refuses to upload.
@@jacobodara so please tell me the error
@@AhmadLogs Thanks very much
I just solved the problem.
@@jacobodara that's great!
I was using this code and completed my project
But offenly not received my sms command...
Pls support me
check you sim800l sms memory. I think the old messages are not deleting automatically. when the message memory is full sim800l stops receiving the sms
Can we use Arduino nano instead of Uno.
And is relay state stable after system restarted sir.
yes you can used arduino nano.
the relay state will reset when the system restarted
@@AhmadLogs thank you sir it's a valuable product.
@@venkataramanac5983 so nice of you
can we monitor inputs also with this
you need to modify the code
Sir this is very nice project but I tried this project but was unable to register my phone no by sending R through sms.
What happened? what output in serial monitor?
@@AhmadLogs ??
@@navinkumar6888 check serial connections
sir i am not getting sms back ,means IN SERIAL MONITOR showing what i send command but no replay of any status
please send me the serial monitor output for receiving sms
how to add manual button
will add in my latest project
HI Ahmad where can i put all my phone numbers
just send the phone numbers by sms using R command. and the arduino will store them in the eeprom.
Sir add the function of turning on off by misd call in this program
by missed call only the one relay can control. to control all relays you need DMTF feature.
@@AhmadLogs only 1
@@sureshgurjar2262 ok
Is the code for the Register phone number works on esp32?
no it will not work on esp32
Dear sir, sms memory automatically deleted?
yes
SIR , if I use 4 g sim with this module then it will be work or not?
it will not work with 4g sim card
@@AhmadLogs Then what is the remedie
will it work woth 3G sim card.. atleast.....
what we have to do to work with 4G sim card
@@454ecekalyankumar5 you just need to buy 3g or 4g gsm module such as sim7600
@@AhmadLogs Is 2G sim available for buying..?
@@454ecekalyankumar5 ask from your gsm network provider
How to change the phone number length to 11 ?
not possible using this code. use my latest code ruclips.net/video/OJcGY4ySs4o/видео.html
i made the project and upload the code as it is but it does not reponding it only showing empty list of number not reponding even a single sms
can you please help me sir
have you test your gsm module?
is it working fine?
@@AhmadLogs yes sir its working event other codes working of sending sms and call but this code is not working and it did not receving sms
@@hrishantprajapati264 just clear the eeprom. then test the project again.
Hello Ahmad khan, how deleted the messages sim800 After each send massage?
Is there this command in your codes?
Thank you 🙏
yes it is there, check the line number 162 and 164
Hii navita please help me
You tell me something about project apne project bnya hai
@@bhushanlilhare8927 unfortunately I forget. please tell me what project you are talking about?
@@AhmadLogs apka jo hai mujhe ye project banana hai lekin mein ye kaise banau 2g sim kaha se lau 4g 3g sim hai but 2 g kaise lau koi idea hai apke pass
@@bhushanlilhare8927 then you need to use 4g gsm module like sim7600
can i use this code in sim900?
gsm900 i mean
Aoa, Tauseef Bhai
I m not getting list of registered on serial monitor as well as on my mobile phone.
I'm using Sim800c GSM Module for this test.
The same module sends SMS & miscalls to my mobile phone using your fire alarm code for Sim800L module.
Can you please check & confirm that the above code for mobile number registration is working ok at your end or does it need some changes.
Preferably if I get your email address so I can share the serial monitor screen shot to you for better understanding of the problem I m facing.
Thanks & kind regards.
I will test it again. check serial monitor for a list of registered phone number. what displaying there?
also test if you eeprom is working?
@@AhmadLogs I m getting square blank boxes on start up of serial monitor at registered phone numbers location. When I send r , it shows only ok in serial monitor Neither it sends Registration SMS nor it shows in serial monitor that the number is registered. I will check the eeprom & will update you.
Kind regards.
@@yawarsaeed6499 OK, I will check a try to improve the project
@@AhmadLogs Ok, meanwhile I have tested the code with a new ATMega328 controller to confirm the eeprom. But getting the same result.
Will be waiting for the modified code from you.
Kind regards.
@@yawarsaeed6499 OK I will try to update the code
My friend, please, if you have a device code. servo motor control by sms thanks
unfortunately I dont have
@@AhmadLogs OK thanks
I face a issue in this project I cannot change the text message for my convenient for eg: i want to change "a0" instant of" light1off " the code does not work properly
Another one is more than 50 message received by simcard 51th message has not received in it
Please fix this
1. make sure all the letters of "light1off" must be in lowercase (small letters.
2. for auto delete sms add the following line of code at the end of line number 402
sim800.print("AT+CMGD=1,4
");
@@AhmadLogs thankyou for the reply I will try & I will give feedback for you
Hi your code works fine, but a little problem is occurs if any unknown message is received the message is saved it may be filled the memory
@@makeforindia612 you can use AT+CMGD=1,4 in the setup function
@@AhmadLogs but my automation project works on 24/7
After 40 messages my project isn't working anymore. Please help me
use at+cmgd=1,4 after the "do_action() function.
I cant understand clearly. Can you be more specific sir please?
@@redigjona8757 I have updated the code. just download the latest copy
How can I get this code
check description
where are you from bro
Pakistan
Like 265 👏👏👏👏
Thank you 👍
Do it with 16 channel relay
ok will try
Do it with 16 channel relay without aurdino nano and mega do it with Arduino UNO
ruclips.net/video/9ovMEo1bTps/видео.html
See this video in this video he show how to increase Arduino UNO digital pins
Do it bro
MOBILE NO NOT REGISTER NO REPLY MSG
what is the output display in serial monitor?
Sir code not work sir
Try again
How to delete message
@@AhmadLogs How To Delete message
@@BarkaMusicRajapakar use the following AT command
AT+CMGD=1,4