Definitely mate. It is made very well, all metal apart from a couple of parts on it. I just wish they was louder. Its the only let down to them. I still have a 3rd sitting in a box unused. I was thinking of doing something with it soon. Maybe a Vietnam version with green camouflage and optics
Wow that's another name I haven't heard before, the list on new ones of these is getting big.. I believe hellboy is the original of all but there was a license problem so after that loads of companies was able to make new versions and hellboy just stopped. Air venturi make these ones. Good rifle and very accurate and powerful. Just a little too quiet for my liking
Hiya mate,ive a fn herstal m4 and im assuming there the same as the hellboy, where could i but the rail handguard from to replace the standard hand guard ? Thanks 👍
Normally I would have to say unless you want to buy for £80 off amazon then it's not happening but it might be your lucky day, check fire support they had two in stock a couple of days ago 😀 They was around £40
Hi mate. Yes it is possible and fairly easy to do, you can add an airsoft barrel extension to the end where the flash hider is, you will need a small one that allows the front sight to remount in its new location, use an airsoft handguard same and you can change the stock if required. Hardest part would be removing the front sight and that's easy as fook 😆
Hi mate I use to use aliexpress but it's getting very hard to find things plus they now have a UK tax added to the site. Amazon is OK but can be expensive, ebay is pretty a lot better as more sellers with better prices. Airsoft shops are always a good option too as most parts generally come from airsoft. Silencer or flash hider you'll want 14mm ccw thread, the handguard however are very hard to get now and cost 80 on amazon, that's the only place I can find them, optics just need to be a 22mm to fit on the pictiny rail
It should be fine mate. My one may be the 7, it's a very tight fit but the part that holds it on can move back and forwards on its spring so it just holds it very tight. Hope the part isn't too expensive, I haven't seen cheap in a long time
@@Replica-Airgun-Lovers thanks for the quick reply. It was around $50 USD. Found it on some weird website but people say it’s a legitimate website. Again your video was very informative so thanks for uploading!
Well this reply was late I fell asleep 😆 and forgot till now to check comments 😅 That isn't a bad price at all, to be honest I think mine is 7 inches but I checked with it on the airgun lol so 0.5 is hidden 😄 Thanks for the feedback too, it's always good to hear what people think, good or bad
Very expensive or just not available now. I use to use aliexpress and it's so cheap but things are either no longer available or just hidden under titles like handle bar grip? How are you meant to find that lol. Amazon do one for £80? Bloody expensive. If I knew what I know now I would have brought 1000 of them at 20 each a year ago 🙄
These handguards are rocking horse poop now mate. You can only find them on amazon for £80 if you're lucky, the muzzle does come off but likely has a little lug nut in it, remove that then it's just twist off
The flash hider is secured with a grub screw on the underside. Remove that and the flash hider will unthread from the barrel in a clockwise direction. The outer barrel itself is a standard airsoft part and has a 14mm counter-clockwise (CCW) thread.
@@Replica-Airgun-Lovers YOU HAVE A FACEBOOK GROUP il share away I'll take it its same name as your channel here bro. And never thought of that freaking good idea yeah
@co2addicted788 haha yeah I started out with the group way before my channel. Check out some Check spring or aeg.. you can then use the hellboy on that and sell or keep m.facebook.com/groups/186218949852221/?ref=share
Way nice the rifle even got the gas tube above the barrel inside there, even the BB gun does not even need it. Good n nice replica for sure.
Definitely mate. It is made very well, all metal apart from a couple of parts on it. I just wish they was louder. Its the only let down to them. I still have a 3rd sitting in a box unused. I was thinking of doing something with it soon. Maybe a Vietnam version with green camouflage and optics
Nice one mate
I have the Huntsman Arms HM16 which is based on the same design, so it uses the same magazine.
They're great fun!
Wow that's another name I haven't heard before, the list on new ones of these is getting big.. I believe hellboy is the original of all but there was a license problem so after that loads of companies was able to make new versions and hellboy just stopped. Air venturi make these ones. Good rifle and very accurate and powerful. Just a little too quiet for my liking
Hiya mate,ive a fn herstal m4 and im assuming there the same as the hellboy, where could i but the rail handguard from to replace the standard hand guard ? Thanks 👍
Normally I would have to say unless you want to buy for £80 off amazon then it's not happening but it might be your lucky day, check fire support they had two in stock a couple of days ago 😀
They was around £40
Greetings, do you think the outer barrel and hanguard can be swapped for a longer one? Like the A4 platform.
Hi mate. Yes it is possible and fairly easy to do, you can add an airsoft barrel extension to the end where the flash hider is, you will need a small one that allows the front sight to remount in its new location, use an airsoft handguard same and you can change the stock if required. Hardest part would be removing the front sight and that's easy as fook 😆
Hi mate, do you know we're to get the upgrades. Can't find anything online apart from sights
Hi mate
I use to use aliexpress but it's getting very hard to find things plus they now have a UK tax added to the site. Amazon is OK but can be expensive, ebay is pretty a lot better as more sellers with better prices. Airsoft shops are always a good option too as most parts generally come from airsoft. Silencer or flash hider you'll want 14mm ccw thread, the handguard however are very hard to get now and cost 80 on amazon, that's the only place I can find them, optics just need to be a 22mm to fit on the pictiny rail
Would the 7 inches handguard work? I couldn’t find any for 6.5 inches one.
It should be fine mate. My one may be the 7, it's a very tight fit but the part that holds it on can move back and forwards on its spring so it just holds it very tight. Hope the part isn't too expensive, I haven't seen cheap in a long time
@@Replica-Airgun-Lovers thanks for the quick reply. It was around $50 USD. Found it on some weird website but people say it’s a legitimate website.
Again your video was very informative so thanks for uploading!
Well this reply was late I fell asleep 😆 and forgot till now to check comments 😅
That isn't a bad price at all, to be honest I think mine is 7 inches but I checked with it on the airgun lol so 0.5 is hidden 😄
Thanks for the feedback too, it's always good to hear what people think, good or bad
Been trying to find a hand guard like that for mine
Very expensive or just not available now. I use to use aliexpress and it's so cheap but things are either no longer available or just hidden under titles like handle bar grip? How are you meant to find that lol. Amazon do one for £80? Bloody expensive. If I knew what I know now I would have brought 1000 of them at 20 each a year ago 🙄
@@Replica-Airgun-Lovers what size are they they one that came up when I searched were the full size ones
@@purebloodhunter sorry I didn't know you replied. They're around 6.5 inches mate
Evening, got a link to hand guards and other accessories? Also do you know if the muzzle break comes off or just the whole barrel?
These handguards are rocking horse poop now mate. You can only find them on amazon for £80 if you're lucky, the muzzle does come off but likely has a little lug nut in it, remove that then it's just twist off
The flash hider is secured with a grub screw on the underside.
Remove that and the flash hider will unthread from the barrel in a clockwise direction.
The outer barrel itself is a standard airsoft part and has a 14mm counter-clockwise (CCW) thread.
@oldspec3006 I got autocorrected from does come off to doesn't come off 🤣
Im not going to say anything 😡😡😂😂😂😂
Haha well at least you have new stuff lol. How come your not in my Facebook group sharing what you have lol
You could buy a cheap airsoft gun off bb guns for less with that handguard on it. Not sure if they have metal tho
@@Replica-Airgun-Lovers YOU HAVE A FACEBOOK GROUP il share away I'll take it its same name as your channel here bro. And never thought of that freaking good idea yeah
@co2addicted788 haha yeah I started out with the group way before my channel. Check out some Check spring or aeg.. you can then use the hellboy on that and sell or keep
m.facebook.com/groups/186218949852221/?ref=share
@@Replica-Airgun-Lovers sorted I've requested think my pic is same as