Decided to do this throttle slack mod, I used a 16gauge brad nail that i bent/crimped around the cable sheath and trimmed after i got it set up. If the cable itself stretches i can add addition brad nails as "spacers", super easy setup. GoPed GP460 with 7/72@6700Feet of elevation goes about 35-36mph all out!!
I need help tuning the carburetor i know my scooter can go faster after i try to tune it but just can't get it right. Can you do a video on how to tune the carb and how to get the max performance thanks
I have a new Go-ped Interceptor and I am having trouble tuning it. There are no videos anywhere online that explains how to do it. They all show someone tuning their Go-ped without explanation and without even showing where to tune. The instruction manual doesn’t have instructions too. The video it has linked is more of a commercial than anything. Can you please help me with this issue because every time I try to tune my engine it begins to lightly smoke and I shut it off. Thank you
hey Derek, i was wondering where i could find some pro slicks and wheels like on your Ferrari ped or the tangerine dream ped, i cant find them anywhere!!!
I know this was awhile ago but is the throttle cable spring essential? I purchased: *BF/GSR Throttle Cable - Braided Carbon (71.5")* from DDM.. I have a GSR Cruiser. Is cable length ok? Also is the spring for throttle needed? walbro 990 carburetor, Zenoah G290RC. Are the RC engines built for Peds as well?
The flaw is not in the lever, it's in the cable. There should be a ferule at the end of the cable. The lever housing is not machined out too big, it's big enough for the ferule.
with a scooter having a twist throttle is dangerous, I personally think why is your standing on a board with no restraints, also if you get on a torn up road you have to have a firm grasp on the handle bars, with a twist throttle it would be hard to stay riding while keeping in control................
+Joseph Anzalone Its on the list but its not a high priority. likely will be a few months but who knows... If i get enough interest I may do it sooner. Got a lot going.
where can I buy a better throttle? I can't stand the stock ones but I can't find anything online. I'm tempted to use a break lever from a bike instead. would that work as well?
Decided to do this throttle slack mod, I used a 16gauge brad nail that i bent/crimped around the cable sheath and trimmed after i got it set up. If the cable itself stretches i can add addition brad nails as "spacers", super easy setup. GoPed GP460 with 7/72@6700Feet of elevation goes about 35-36mph all out!!
Can you please make a video on HOW TO TUNE YOUR GOPED?
Jordan Fields have you found out how to tune?
Appreciate the Tip!!! Awesome tip!!! Thanks DS!!!!
I need help tuning the carburetor i know my scooter can go faster after i try to tune it but just can't get it right. Can you do a video on how to tune the carb and how to get the max performance thanks
But where can you buy the handlebars and Neck that you have on your gopeg thanks
How do I set up my throttle on a blade z got gp46cc having problems connecting wire to carb
Great info! Thank you
I have a new Go-ped Interceptor and I am having trouble tuning it. There are no videos anywhere online that explains how to do it. They all show someone tuning their Go-ped without explanation and without even showing where to tune. The instruction manual doesn’t have instructions too. The video it has linked is more of a commercial than anything. Can you please help me with this issue because every time I try to tune my engine it begins to lightly smoke and I shut it off. Thank you
hey Derek, i was wondering where i could find some pro slicks and wheels like on your Ferrari ped or the tangerine dream ped, i cant find them anywhere!!!
I know this was awhile ago but is the throttle cable spring essential? I purchased: *BF/GSR Throttle Cable - Braided Carbon (71.5")* from DDM.. I have a GSR Cruiser. Is cable length ok? Also is the spring for throttle needed? walbro 990 carburetor, Zenoah G290RC. Are the RC engines built for Peds as well?
The throttle cable spring just helps keep the cable from popping out of the pivot on the throttle shaft.
Hey Derek I just got a gp460 engine and I was wondering what's the best way to break it in. Thanks
One could also go and buy a BMX brake lever which has a cable adjuster built in to it and as the cable ages/stretches you can adjust it on the fly.
Thanks for the great tips
Where can i buy a one of them.from any link s please
The flaw is not in the lever, it's in the cable. There should be a ferule at the end of the cable. The lever housing is not machined out too big, it's big enough for the ferule.
another great vid man thanks I'll use that on my ped to
Where does a physical store sell?
Why all go peds have lever throttle? Is it uncomfortable to ride a go ped with twist throttle?
Kamen Kachev mine has a lever
with a scooter having a twist throttle is dangerous, I personally think why is your standing on a board with no restraints, also if you get on a torn up road you have to have a firm grasp on the handle bars, with a twist throttle it would be hard to stay riding while keeping in control................
Hey when will u make a vid on how to properly vent a gas tank cuz I wanna do it to my ped
+Joseph Anzalone Its on the list but its not a high priority. likely will be a few months but who knows... If i get enough interest I may do it sooner. Got a lot going.
+Derek Short Ok thanks
Does this work for the go ped riot?
+Josh Marcum Yes, I will also be making a new video very soon on an update mod that makes this even more easy to do.
where can I buy a better throttle? I can't stand the stock ones but I can't find anything online. I'm tempted to use a break lever from a bike instead. would that work as well?
yes, as long as the ends fit.
Thank u
Use smaller Zip ties it will work better.......
Hey Derek I've tried messaging you on your Facebook page, I can't get the message to send for some reason.
+dallin ostler ok, whats up?
og
First