No.128 - Agilent U1731A LCR Meter Repair
HTML-код
- Опубликовано: 29 сен 2024
- ** PCBWAY For all your PCB Services at www.pcbway.com... **
This Agilent U1731A LCR meter isn't powering up properly and seems to have multiple faults.
#electronicscreators
Visit my website for lots more - www.ianjohnsto...
Help me make more of these videos:
Pledge using Patreon - / iansjohnston
Donate using PayPal - www.paypal.me/...
Follow me on Twitter - / iansjohnston
This does look like a case of maybe a charged up cap being connected to the input.
the worst I've had with zebra strips is the plating on the glass being etched away due to moisture ingress. Don't seem to take much to remove the few atoms of metal on the glass.
Ahhh, yes of course!.....probably some large electrolytic.
Nice work! I very much enjoy watching your video's.
I have yet to see a failed repair from you Ian, well done yet again, keep them coming
Cheers Peter!......there is a Fluke 8846A that I posted a part 1 for.....really need to get back to that nightmare soon!
Nice sleuthing Ian! I thought the same thing as some others. Sooo easy to forget to discharge a cap under test and knacker the "front end". Surprising no resistors popped. Love your skills. Thanks for the content! - jrh
Ian, maybe a charged capacitor was plugged into the unit possibly taking out those components.
Cheers Eric
Yep, that’s the common opinion of some others here in the comments also…….and I agree.
Excellent work =D
I learn SO MUCH from this video! Huge thanks for great video! Cheers
Nice work!
You might find that BJT transistors used with collector-base junction as a diode may also be for very low leakage, or couse limited by the max base current.
Well done Ian, Ian, how do you go about finding SMD component codes, I have a hell of a time with it. Bob
Google SMD COOKBOOK, there are a couple sites near the top.
@@IanScottJohnston Thank you Ian, did you mean cookbook or codebook?
I find erasers work great on gold contacts without removing the plating.
very useful video, thanks
I guessed the zebra strip for the first failure. But boy, the rest really led a merry chase!
20:28 ‘…as a bit of a recap…’!!! And a bit of a re-FET!!
Nice repair. Don't you have the macrolens for that camera? I can recomment it. It is very usefull. You can get much closer and see individual smd components with it.
Yes, I should really get it.
you should have as many subs as that Aussie with the big knife by now
Thankfully it is video views that count, and I get regular views on each video up in the numbers where some channels have 100k subs.
That huge Wima cap in there tho..
Not easy but will done.
You are a big magician!
nice job....thanks for not filming the soldering/de soldering parts
Sometimes I do, sometimes I don’t. It just depends on how interesting I think it may be.
I really must look out for more faulty test equipment for sale. Nice little fix on this LCR meter.
EBay prices are high so it’s quite tough and expensive. Luckily, I have a local contact outside of EBay.
I have a 1732B which looks very similar apart from being orange. I think I got it cheap because it had been obsoleted by the 1732C. They seem to have made a lot of revisions and I think they're actually rebranded chinese, not really Agilent. Does anyone know the history ?
Good to see you test it before reassembly. I get very impatient with people who seem to completely reassemble things rather than testing in stages.
The meter looks similar to BK precision (that is a rebranded asian product, afaik), but it is quite different. Reverse order of terminals, no 4 wire, different display, different number of counts etc, mechanical on/off switch etc. All that doesn't mean that it isn't a chinese design, but at least I haven't seen an identical chinese meter yet.
Pretty sure they use the same family of Taiwanese LCR chips. You can see the DE-5000 over at the end of the video. Cool little things.
Just subscribed thanks for the vid 👍
Cheers!
I prefer a pencil eraser for the first clean above ipa. Fiberglass pen seems too harsh for me. Great repair though, appreciate you showing your thought process.
Provided you are really light to touch with the fibreglass pen it's pretty good. Saying that, there are different grades of the pens, the red coloured one is not the lightest, maybe I'll try the nylon ones next time.
Red = fibreglass / soft
Yellow = brass / medium
Black = steel / hard
Blue = nylon soft
Green = nylon hard
@@IanScottJohnston Honestly didn't know there were different hardnesses on fiberglass pens, thats good to know! The auto store only sells one, lol.
Hi, Nice video and fix. Where do you find the cross reference for the component codes? I have not found a reliable source to be able to get a translation of these codes.
Thanks.
Search for SMD Cookbook and you’ll find a few.
@@IanScottJohnston Thank you. 👍
Great detective work again Ian…shows how handy an IR camera can be in these situations would the replacement battery cover be a candidate for the 3D printer..?
Might have been interesting to see a before and after IR camera picture.
Who's that funny guy in a hat 🙂
Nice repair! I'm thinking TEH is right, a charged electrolytic capacitor connected to the input. Did you check the capacitor removed from the board? Always like to know if it was the crapacitor 😊 Regards, David
No, I chucked it already.
Found it!......40uF, ESR 4ohms (it's a 47uF 25V cap)
Dirty Zebras were a problem with fluke meters 🙂
Ebay are making a killing selling 'repair kits' on Ebay for them......am guessing a good clean would help!